LASER TREE K1 MAX 60W Laser Engraver Instruction Manual

1. Бүтээгдэхүүн дууссанview

The LASER TREE K1 MAX is a high-power diode laser engraving and cutting machine designed for DIY enthusiasts and small businesses. It features an adjustable 60W laser module, offering versatile power options for various materials and applications. The machine boasts an exceptionally large working area of 800x600mm and a maximum engraving speed of 20000mm/min, enabling efficient and precise work.

Гол онцлогууд:

• High Power Laser Module: Built-in 12pcs 5.5W beam compressed laser diodes, delivering 60W+ optical power.
• Тохируулж болох хүч: Easily switch between 20W, 40W, and 60W for engraving and cutting tasks.
• Том ажлын талбай: 800x600mm workspace for extensive projects.
• Өндөр сийлбэрийн хурд: Up to 20000mm/min for rapid processing.
• Accurate Focus: Ensures precise and clean results.
• Агаарын туслах: Improves cutting performance and surface cleanliness.
• Cable Drag Chain: Manages cables for a tidy and safe workspace.
• TF Card Offline Engraving: Allows operation without a continuous computer connection.
• Red Cross Line Locating: Aids in precise material positioning.
• Machine Tilt Detection and Protection: Enhances safety by alarming if the machine is tilted during operation.

Бүтээгдэхүүний үзүүлэн:

Video: Comparison of K1 MAX 60W engraving and cutting capabilities against a 40W laser engraver.

2. Аюулгүй байдлын мэдээлэл

WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles when operating the machine.

• Нүд хамгаалах: Always wear certified laser safety goggles that block the laser's wavelength (450nm) when the laser is active.
• Агааржуулалт: Operate the machine in a well-ventilated area or use an exhaust system to remove fumes and smoke generated during engraving/cutting.
• Галын аюул: Laser cutting can ignite flammable materials. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Материалын аюулгүй байдал: Only engrave or cut materials that are safe for laser processing. Avoid materials that produce toxic fumes or can catch fire easily.
• Машины тогтвортой байдал: Ensure the machine is placed on a stable, level surface. The built-in tilt detection system will alert you if the machine is moved or tilted during operation.
• Хүүхэд ба тэжээвэр амьтад: Хүүхэд болон тэжээвэр амьтдыг үйл ажиллагааны талбайгаас хол байлга.
• Яаралтай зогсолт: Яаралтай зогсоох товчлуурын байршил, функцтэй танилцана уу.

3. Багцын агуулга

The LASER TREE K1 MAX 60W package includes the following components:

Зураг: Нарийвчилсан view of all components included in the LT-K1 Max 60W package.

• X-Axis Assembly x1
• Y-Axis Assembly x2
• Front Frame x1
• Rear Frame x1
• X-Axis Pulley Fixing Plate x1
• Support Feet x3
• Main Control Box x1
• Y-Axis Timing Belt x2
• Main Cable x1
• Цахилгаан адаптер x1
• Хувьсах гүйдлийн кабель x1
• Карт уншигч x1
• TF Card x1
• USB кабель x1
• Laser Module x1 (60W)
• Spare Laser Protective Lens x2
• Air Assist Pump x1
• Honeycomb Panel x1
• Desktop Protection Plate x1
• M4*30 Adjusting Screw x2
• T-Nut x4
• M4*5 Fasten Screw x4
• M4*18 Round Screw x1
• M5*10 Round Screw x1
• M5*20 Round Screw x16
• M5*20 Flat Screw x1
• Limiting Column Sleeve x1
• Материалын багц x1
• Air Pump User Manual x1
• K1 Max User Manual x1
• Square Pad x4
• L-Allen Wrench x4 (2mm, 2.5mm, 3mm, 4mm)
• 8-10 Open Spanner x1
• Кабелийн зангилаа x1
• Цэвэрлэх сойз x1

4. Техникийн үзүүлэлтүүд

Cutting Performance (Power: 100%):

Image: Cutting depth capabilities for 20W, 40W, and 60W laser modules on materials like plywood, pine wood, MDF, and acrylic.

• 20W Module: Can cut 12mm Plywood (160mm/min), 15mm Pine Wood (460mm/min), 5mm MDF (15mm/min), 15mm Acrylic (15mm/min).
• 40W Module: Can cut 15mm Plywood (200mm/min), 20mm Pine Wood (130mm/min), 9mm MDF (150mm/min), 20mm Acrylic (30mm/min).
• 60W Module: Can cut 20mm Plywood (170mm/min), 40mm Pine Wood (50mm/min), 9mm MDF (400mm/min), 30mm Acrylic (30mm/min).

5. Тохируулах гарын авлага

Follow these steps to assemble and set up your LASER TREE K1 MAX laser engraver:

1. Бүрэлдэхүүн хэсгүүдийг задлах: Carefully remove all items from the packaging and verify against the packing list.
2. Хүрээг угсрах: Connect the X-Axis Assembly, Y-Axis Assemblies, Front Frame, and Rear Frame according to the included K1 Max User Manual. Ensure all screws (M5*20 Round Screw, M4*5 Fasten Screw, etc.) are securely tightened.
3. Install Support Feet: Attach the three Support Feet to the base of the machine.
4. Install Y-Axis Timing Belts: Secure the Y-Axis Timing Belts as per the manual's instructions.
5. Mount Main Control Box: Attach the Main Control Box to the designated location on the frame.
6. Лазер модулийг суулгах: Carefully mount the 60W Laser Module onto the X-axis assembly. Ensure it is properly seated and secured.
7. Кабель холбох: Connect the Main Cable, Power Adapter, and AC Cable. Route all cables neatly using the provided Cable Ties and the Cable Drag Chain.
8. Set up Air Assist: Connect the Air Assist Pump to the laser module and power supply as instructed in the Air Pump User Manual.
9. Place Honeycomb Panel: Position the Honeycomb Panel on your work surface, underneath the laser's working area, to protect your desktop and improve cutting results. Use the Desktop Protection Plate if needed.
10. Програм хангамж суурилуулах: Install the recommended laser control software (e.g., LightBurn, LaserGRBL) on your computer. Refer to the software's documentation for installation and basic usage.
11. Анхны асаалт: Connect the power adapter and turn on the machine. Observe for any unusual noises or movements.

6. Ашиглалтын заавар

6.1. Материал бэлтгэх

• Place your material on the Honeycomb Panel.
• Use the Red Cross Line Locating feature to accurately position your material.

6.2. Focusing the Laser

Achieving accurate focus is crucial for optimal engraving and cutting results. Refer to the K1 Max User Manual for detailed focusing procedures, typically involving adjusting the laser module height until the laser spot is at its smallest point on the material surface.

6.3. Adjusting Laser Power (20W/40W/60W)

The K1 MAX allows you to switch between 20W, 40W, and 60W power modes directly on the laser module. Select the appropriate power based on your material and desired outcome. Higher power is generally used for cutting thicker materials, while lower power is suitable for engraving and fine details.

Image: Visual representation of adjustable laser power settings and other features.

6.4. Using Air Assist

Connect and activate the Air Assist Pump when cutting or engraving materials that produce significant smoke or residue. Air assist helps to blow away debris, resulting in cleaner cuts and reduced charring.

6.5. Offline Engraving (TF Card)

To perform offline engraving:

1. Загвараа бэлдээрэй file using compatible software and save it to the TF card.
2. Insert the TF card into the Main Control Box.
3. Өөрийгөө сонгоно уу file using the machine's controls (refer to the manual for specific navigation).
4. Start the engraving process without needing a connected computer.

6.6. Сийлбэр ба зүсэх үйл явц

1. Загвараа ачаална уу file into the laser control software or select it from the TF card.
2. Set the appropriate power, speed, and passes based on your material and desired effect. Refer to the cutting performance tables in the Specifications section for guidance.
3. Ensure all safety precautions are in place (goggles, ventilation).
4. Initiate the engraving/cutting job. Monitor the process closely.

Зураг: Visual examples of the K1 MAX's ability to cut various materials in a single pass.

7. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны лазер сийлбэрийн урт наслалт, оновчтой гүйцэтгэлийг баталгаажуулдаг.

• Цэвэр лазер линз: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
• Clean Rails and Belts: Keep the guide rails and timing belts free from dust and debris. Lubricate the rails as recommended in the manual.
• Clean Honeycomb Panel: Remove accumulated debris and cut pieces from the honeycomb panel to ensure proper airflow and prevent fire hazards.
• Холболтуудыг шалгах: Regularly inspect all electrical and mechanical connections for tightness and wear.
• Програм хангамжийн шинэчлэлтүүд: Keep your laser control software and firmware updated to the latest versions.

8. Алдаа засах

Нийтлэг асуудал ба шийдэл:

9. Хэрэглэгчийн зөвлөмж

• Эргэлдэгч хавсралт: The K1 MAX is designed for flat material processing. If you intend to engrave cylindrical objects like mugs, you may need to purchase a compatible rotary attachment separately. Check with the manufacturer or seller for recommended accessories.
• Материалын туршилт: Always perform small test engravings or cuts on scrap material before starting a large project to fine-tune your power and speed settings.
• Air Assist for Cleanliness: For cleaner cuts and to minimize charring, especially on wood and acrylic, always use the air assist feature.
• Ажлын байрны зохион байгуулалт: Keep your workspace tidy and free of clutter to prevent accidents and ensure smooth machine operation.

10. Баталгаат хугацаа ба дэмжлэг

Баталгаат хугацаа:

All LASER TREE products come with a 1 жилийн баталгаат хугацаа ердийн ашиглалтын үед үйлдвэрлэлийн согог, доголдлыг хамарсан, худалдан авсан өдрөөс эхлэн. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.

Хэрэглэгчийн дэмжлэг:

For any technical assistance, troubleshooting, or warranty inquiries, please contact the seller or manufacturer directly. All emails will typically be answered within 24 hours.

• Худалдагч: Laser Tree Retails Store
• Холбоо барих мэдээлэл: Refer to your purchase platform or the official Laser Tree webхолбоо барих мэдээллийг авах сайт.