Танилцуулга
Thank you for choosing the Kemei KM-1990 Professional Hair Clipper. This manual provides detailed instructions for the safe and effective use, maintenance, and care of your new hair clipper. Please read this manual thoroughly before first use and keep it for future reference.
The Kemei KM-1990 is a versatile electric trimmer designed for professional and home use, featuring a powerful motor, patented angular blade, and an intuitive LCD display for battery status and turbo mode.
Багцын агуулга
Багцыг нээхдээ доор жагсаасан бүх зүйл байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгана уу.
- Kemei KM-1990 Hair Clipper
- Цэнэглэх кабель
- Цэвэрлэх сойз
- Тосолгооны тос
- Хөтөч сам (янз бүрийн хэмжээтэй)
- Hairdressing Cape
- Scissors (hair cutting and thinning)
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
For a visual guide to the package contents, please watch the unboxing video below:
Тохиргоо ба анхны хэрэглээ
1. Клипперийг цэнэглэж байна
The Kemei KM-1990 hair clipper is rechargeable and can be used cordlessly. Before first use, or when the battery indicator on the LCD display shows low charge, fully charge the device.
- Connect the charging cable to the clipper and a suitable power adapter (AC 110-240V, 50-60Hz).
- The LCD display will show the charging progress.
- A full charge takes approximately 3 hours. The clipper can work for about 120 minutes after a full charge.
2. Blade Alignment (Factory Set)
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave the factory. If the blades are removed for cleaning or replacement, they must be re-aligned. To re-align:
- Simply match the top and bottom blade teeth point to point upwards.
- The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade.
- Compare your scissor blades with the provided sketch (if available).
- If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close, and unplug them.
- Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
3. Хөтөч самнуудыг хавсаргах
Select the desired guide comb for your preferred cutting length. The clipper comes with various sizes, including 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 19mm, and 25mm.
- Клиппер унтарсан эсэхийг шалгаарай.
- Чиглүүлэгч самыг хайчны иртэй зэрэгцүүлж, товших хүртэл хүчтэй түлхэнэ.
- Арилгахын тулд самыг хутганаас зөөлөн татна.
Ашиглалтын заавар
1. Асаах/Унтраах болон горим сонгох
- Үсчинг асаах эсвэл унтраахын тулд асаах товчийг дарна уу.
- The LCD display will show the battery percentage and current mode.
- The clipper features a powerful motor with both Standard and Strong (Turbo) modes. Use the appropriate button to switch between modes as needed for different hair types or cutting tasks.
2. Hair Cutting Techniques
The Kemei KM-1990 is suitable for various cutting styles, including wet and dry haircuts, electric length adjustment, sculpting, pushing white, and gradual trimming.
- Always start with a longer guide comb than you think you need, and gradually reduce the length.
- Үсний хайчийг толгойд нь тэгшхэн барьж, үс ургах чиглэлийн эсрэг аажмаар хөдөлгөнө.
- For detailed work or fading, use the clipper without a guide comb, adjusting the blade lever for precise cutting lengths (1.1mm - 2mm minimum cutting length).
- Үс засах машин нь үсний нягтралаас хамааран автомат хүчийг сонгох функцтэй тул тогтвортой ажиллагааг хангадаг.
Засвар үйлчилгээ, арчилгаа
1. Хутгыг цэвэрлэх
- After each use, turn off the clipper and remove the guide comb.
- Хутган дээрх сул үсийг арилгахын тулд өгөгдсөн цэвэрлэгээний сойз ашиглана уу.
- The blades are designed for washing under water. You can rinse the blade assembly under running water. Ensure the clipper body is not submerged.
- Дахин холбох эсвэл хадгалахын өмнө ирийг агаарт бүрэн хатаана.
2. Хутгыг тослох
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly:
- Ensure the clipper is clean and dry.
- Apply a few drops of the provided lubricating oil across the top of the blades.
- Тосыг жигд хуваарилахын тулд үсний хайчыг хэдэн секундын турш асаана уу.
- Илүүдэл тосыг зөөлөн даавуугаар арчина.
3. Хадгалах
Клипперийг нарны шууд тусгал, чийгээс хол, сэрүүн, хуурай газар хадгална. Хүүхдэд хүрэхгүй газар хадгал.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Clipper асахгүй байна. | Батерей бага эсвэл цэнэглэгдээгүй. | Клипперийг бүрэн цэнэглэ (ойролцоогоор 3 цаг). Цэнэглэх кабель зөв холбогдсон эсэхийг шалгаарай. |
| Clipper үсийг зулгаах эсвэл тэгш бус тайрдаг. | Blades are dull, dirty, or misaligned. Insufficient oil. | Clean and oil the blades. Check blade alignment and adjust if necessary. If blades are dull, consider replacement. |
| Clipper runs slowly or with reduced power. | Low battery or hair buildup in the motor. | Charge the clipper. Clean the blades and ensure no hair is obstructing the motor area. |
If you encounter issues not listed here, please refer to the full user manual PDF or contact customer support.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загвар | KM-1990 |
| Эрчим хүчний хангамж | Rechargeable (Mains and battery operation) |
| Хүч | 5W |
| Ботьtage | AC 110-240V (<20V internal operating voltage) |
| Давтамж | 50-60 Гц |
| Батерейг цэнэглэх хугацаа | Approx. 3 hours (up to 2 hours mentioned in product properties) |
| Battery Life / Use Time | Approx. 120 minutes (over 90 minutes mentioned in product properties) |
| Хутганы материал | Зэвэрдэггүй ган |
| Моторын төрөл | ЭРЭГЛЭГЧ |
| Функцүүд | Electric length adjustment, wet haircut, dry haircut, automatic power selection based on bristle density, washing knives under water, fast charging, charging indication |
| Хамгийн бага зүсэлтийн урт | 1.1 - 2 мм |
| Зүсэх хамгийн их урт | 11 - 20 мм |
| Урт тохируулах арга | Цорго солих |
| Хумсны тоо | 5 or more pieces |
| Зорилго | For beard and mustache, for the head |
| Материал | ABS + Металл |
| Гэрчилгээ | 3C, CE, CCC |
Баталгаат болон дэмжлэг
The following guarantees are offered for the product:
- The product is manufactured and inspected through strict quality control.
- If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair centre in accordance with the warranty card. (Batteries and blades are consumables and are not included in the warranty and are subject to payment).
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage гажиг.
- Due to neglect of product specifications.
For more detailed information, please refer to the official user manual PDF: Kemei KM-1990 User Manual (PDF)
Хэрэглэгчийн зөвлөмж
- Урьдчилан тайрах: For very long hair, it's often helpful to trim it roughly with scissors before using the clipper to avoid clogging and ensure a smoother cut.
- Цэвэр байдал нь гол зүйл юм: Regularly clean and oil your clipper blades to maintain sharpness and prolong the life of the device. This prevents pulling and ensures a smooth cut.
- Батерейны удирдлага: Keep an eye on the LCD battery display. Charging the clipper before it completely drains can help maintain battery health over time.
- Experiment with Guards: Don't be afraid to try different guide comb sizes to find the perfect length for your desired style.
