1. Танилцуулга
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and exampпрограмууд.
2. Аюулгүй байдлын мэдээлэл
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Төхөөрөмжийг хүүхэд, тэжээвэр амьтнаас хол байлга.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Never leave the engraver unattended during operation.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Багцын агуулга
Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Лазер нүдний шил
- USB кабель
- Цахилгаан адаптер
- Халив
- Test materials (e.g., wood, black plastic sheets)
- Хэрэглэгчийн гарын авлага (физик хуулбар)
Figure 3: Included accessories and components.
4. Тохируулах гарын авлага
- Савлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
- Байршил: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Эрчим хүчний холболт: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- USB холболт: Connect the engraver to your computer using the provided USB cable.
- Bluetooth холболт: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Офлайн ажиллагаа: The device supports offline operation once engraving files байршуулсан байна.
- Програм хангамж суурилуулах: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Фокусын тохируулга: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Ашиглалтын заавар
- Материалын бэлтгэл: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Аюулгүйн нүдний шил зүүх: Always wear the provided laser goggles before starting any engraving task.
- Програм хангамжийн интерфейс:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Сийлбэрийн параметрүүдийг тохируулах:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Лазерын хүч: Adjust the laser intensity (e.g., 230, range 0-1000).
- Хэмжээ: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Урьдчилсанview ба албан тушаал: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Сийлбэр хийж эхлэх: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Хяналт: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Дуусгах: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Засвар үйлчилгээ
- Cleaning the Laser Lens: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Cleaning the Engraving Area: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Яндангийн порт: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Хадгалах: When not in use, store the engraver in a dry, dust-free environment.
7. Алдаа засах
- Лазер гаралт байхгүй:
- Check if the power adapter is securely connected and the device is powered on.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Сийлбэрийн чанар муу:
- Фокус: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Тохиргоо: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Материал: Ensure the material is flat and securely placed to prevent movement during engraving.
- Холболтын асуудал:
- USB: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Bluetooth: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- Програм хангамж хариу өгөхгүй байна:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Бүтээгдэхүүний нэр | TS1 Mini Laser Engraving Machine |
| Main Body Color | Мөнгөлөг саарал |
| Биеийн үндсэн материал | Injection molding + aluminum |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 157 мм x 157 мм x 167 мм (6.22 инч x 6.22 инч x 6.69 инч) |
| Сийлбэрийн талбай | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Лазерын хүч | 3W |
| Optimal Focusing Distance | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Бүтээгдэхүүний цэвэр жин | Approx. 1025.7g (±100g) |
| Сав баглаа боодлын хэмжээ | 203 мм x 210 мм x 196 мм |
| Эрчим хүчний хангамж | 12V/2A |
| Ажлын эрчим хүчний хэрэглээ | 17.5 Вт |
| Bluetooth | Дэмжигдсэн |
| TF хадгалах | Supported (built-in) |
| USB порт | Дэмжигдсэн |
| Сийлбэрийн нарийвчлал | 0.1 мм |
| Сийлбэрийн хамгийн дээд хурд | 3000мм/мин |
| Хамгийн их хурдатгал | 320мм/мин |
| Тохиромжтой програм хангамж | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Хянагч | GRBL |
| Ухаалаг төхөөрөмж | Тиймээ |
| Баталгаажуулалт | CE |
| CNC эсвэл үгүй | CNC |
Figure 7: Product dimensions and engraving area.
9. Хэрэглэгчийн зөвлөмж
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Материалын туршилт: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- Агааржуулалт: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
