Komshine KPV-53 Fiber Optic Power Meter & Visual Fault Locator User Manual

1. Танилцуулга

The Komshine KPV-53 is a versatile 2-in-1 device integrating an Optical Power Meter (OPM) and a Visual Fault Locator (VFL). It is designed for efficient and accurate testing of fiber optic networks, allowing measurement of optical power and detection of fiber disconnections. This manual provides detailed instructions for the proper setup, operation, and maintenance of your KPV-53 device.

2. Үндсэн шинж чанарууд

• 2-ын-1 функциональ байдал: Integrates Optical Power Meter (OPM) and Visual Fault Locator (VFL).
• Wavelength Support: Measures optical power across 7 calibrated wavelengths: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm.
• Бүх нийтийн интерфейс: Equipped with a 2.5mm universal interface, compatible with SC, FC, ST, and LC connectors (with optional adapters).
• Built-in VFL: Features a 10mW Visual Fault Locator for quick and convenient detection of fiber disconnections.
• Бат бөх дизайн: Includes a dust-resistant rubber cap, robust rubber armor, and an anti-wrestling silicone jacket for enhanced protection against drops and dust.
• LED арын гэрэлтүүлэг: Ensures clear display readability in various lighting conditions.
• Хэрэглэгчдэд ээлтэй ажиллагаа: Simple one-key start and automatic shutdown function to conserve battery life.
• Өргөтгөсөн зай: Provides approximately 50 hours of operation in continuous mode.
• Эргономик дизайн: Features a scaffold design for comfortable and convenient handling during use.

3. Багцын агуулга

Бүх зүйл байгаа, гэмтэлгүй байгаа эсэхийг шалгахын тулд багцыг сайтар шалгана уу.

• Komshine KPV-53 Fiber Optic Power Meter & VFL
• Түргэн гарын авлага
• Баталгаат карт
• (Batteries are typically not included and must be purchased separately)

4. Техникийн үзүүлэлтүүд

5. Тохируулах заавар

5.1. Зай суурилуулах

1. Locate the battery compartment on the back of the KPV-53 device.
2. Зайны тасалгааны тагийг нээ.
3. Insert three (3) AAA 1.5V alkaline batteries, ensuring correct polarity.
4. Зайны тасалгааны тагийг сайтар хаа.

5.2. Шилэн кабелийг холбох

The KPV-53 features a 2.5mm universal interface for the Optical Power Meter and a dedicated port for the Visual Fault Locator. Ensure to use the correct adapter for your fiber type.

1. Remove the dust cap from the desired port (OPM or VFL).
2. Clean the fiber optic connector end-face thoroughly using appropriate fiber cleaning tools.
3. Insert the cleaned fiber optic connector into the device port. For OPM, the standard connector is SC UPC, but adapters for FC, ST, and LC are available (optional).
4. Аюулгүй холболтыг баталгаажуулна уу.

6. Ашиглалтын заавар

6.1. Асаах/унтраах

• Төхөөрөмжийг асаахын тулд товчийг дараад барина уу Хүч товч () дэлгэц асах хүртэл.
• Унтраахын тулд the товчийг удаан дарна уу Хүч button again. The device also features an automatic shutdown function after 5 minutes of inactivity.

6.2. Optical Power Meter (OPM) Function

1. Connect the fiber optic cable to the OPM port as described in Section 5.2.
2. дээр дарна уу Долгионы урт (λ) button to cycle through the available calibrated wavelengths (850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm) until the desired wavelength is displayed.
3. The current optical power measurement will be shown on the LCD in dBm, dB, or uW.
4. Setting Reference (REF) and Unit (dB/dBm): дээр дарна уу REF/dB button to switch between absolute (dBm) and relative (dB) measurements. To set a reference value for relative measurements, press and hold the REF/dB товч.
5. Шалгалт тохируулга: For calibration, connect the KPV-53 to a light source of the same wavelength. Simultaneously press the REF/dB болон VFL keys to enter the adjustment interface. Use the Долгионы урт (λ) key for downward adjustment and the REF/dB key for upward adjustment. Once the desired calibration is achieved, press the VFL key to save the parameters.

6.3. Visual Fault Locator (VFL) Function

1. Connect the fiber optic cable to the VFL port as described in Section 5.2.
2. дээр дарна уу VFL button to activate the red laser.
3. Observe the fiber for any light leakage, which indicates a break or fault. The VFL operates in both Continuous Wave (CW) and Modulation modes.
4. дээр дарна уу VFL button again to turn off the laser.

6.4. Видео үзүүлэх

7. Засвар үйлчилгээ

7.1. Цэвэрлэгээ

• Always clean fiber optic connector end-faces before connecting them to the KPV-53 to prevent contamination and ensure accurate measurements. Use lint-free wipes and fiber optic cleaning solutions.
• Keep the device's optical ports covered with dust caps when not in use to prevent dust and debris from entering.
• Төхөөрөмжийн гадна талыг зөөлөн, хуурай даавуугаар цэвэрлэ. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.

7.2. Хадгалах

• When not in use, store the KPV-53 in its protective packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
• Хэрэв удаан хугацаагаар хадгалах юм бол гоожихоос сэргийлж батерейг салга.

8. Алдаа засах

Төхөөрөмж асахгүй байна:

Батерейг зөв суурилуулсан, хангалттай цэнэгтэй эсэхийг шалгана уу. Шаардлагатай бол зайгаа солино.

Inaccurate OPM readings:

Ensure the fiber optic connectors are clean. Verify that the correct wavelength is selected on the OPM. If readings are consistently off, consider recalibrating the device as per Section 6.2.

VFL laser is not visible:

Confirm that the fiber optic cable is properly connected to the VFL port. Ensure the VFL function is activated by pressing the VFL button. Check for any obstructions in the VFL output port.

9. Хэрэглэгчийн зөвлөмж

• Always clean fiber optic connectors before use to ensure accurate measurements and prevent damage to the device's optical ports.
• Utilize the appropriate fiber adapter for your specific connector type (SC, FC, ST, LC) to ensure a proper and secure connection.
• Regularly check the battery levels, especially before critical testing, to avoid interruptions during operation.
• When using the VFL, be mindful of the Class 3b laser and avoid direct eye exposure.

10. Баталгаат хугацаа ба дэмжлэг

The Komshine KPV-53 comes with a 3-year warranty, providing assurance for your investment. For technical support, service inquiries, or to claim warranty, please refer to the contact information provided with your purchase or visit the official Komshine webтусламж авах сайт.