Akko 5108B Plus Joy of Life Mechanical Keyboard User Manual

1. Танилцуулга

Thank you for choosing the Akko 5108B Plus Joy of Life Mechanical Keyboard. This full-size (108-key) keyboard features a unique 'Joy of Life' aesthetic with PBT dye-sublimation keycaps, Akko V3 Piano Pro switches, vibrant RGB backlighting, and versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). This manual provides essential information for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance and longevity.

2. Багцын агуулга

Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.

• Akko 5108B Plus Joy of Life Mechanical Keyboard
• USB төрөл-C кабель
• 2.4G утасгүй хүлээн авагч
• Товчлуур татагч
• Шилжүүлэгч татагч
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

3. Тохиргоо ба холболт

3.1 Анхны цэнэглэлт

Before first use, it is recommended to fully charge the keyboard. Connect the USB Type-C cable to the keyboard's port and the other end to a powered USB port on your computer or a USB wall adapter. The keyboard has a built-in 3000mAh battery.

3.2 Гарыг холбох

The Akko 5108B Plus supports three connection modes:

• Утастай горим:
  1. Гар дээрх горимын унтраалга 'Утастай' дээр тохируулагдсан эсэхийг шалгаарай (ихэвчлэн кабелийн дүрс эсвэл 'USB'-ээр заагддаг).
  2. Гарнаас USB Type-C кабелийг компьютерынхоо USB порт руу холбоно уу.
  3. Гарыг таны үйлдлийн систем автоматаар таних ёстой.
• 2.4G утасгүй горим:
  1. Locate the 2.4G wireless receiver (dongle) in the package.
  2. 2.4G хүлээн авагчийг компьютер дээрх боломжтой USB порт руу залгаарай.
  3. Set the keyboard's mode switch to '2.4G' (often indicated by a wireless icon).
  4. The keyboard should connect automatically. If not, press Fn + F1 (or the designated pairing key) to initiate pairing.
• Bluetooth горим:

  The keyboard supports Bluetooth 5.0 and can connect to multiple devices.

  1. Set the keyboard's mode switch to 'Bluetooth' (indicated by a Bluetooth icon).
  2. On your computer or device (Windows, macOS, iOS, Android), open Bluetooth settings.
  3. To enter pairing mode on the keyboard, press and hold Fn + E/R/T/Y/U (for Bluetooth device 1-5 respectively) for 3-5 seconds until the indicator light flashes rapidly.
  4. Select 'Akko 5108B Plus' from the list of available Bluetooth devices on your computer/device and follow any on-screen prompts to complete pairing.
  5. To switch between paired Bluetooth devices, press Fn + E/R/T/Y/U briefly.

3.3 Software Installation (Akko Cloud Driver)

For advanced customization of RGB lighting, macros, and key remapping, download and install the Akko Cloud Driver software from the official Akko webсайт. Энэ програм хангамж нь Windows үйлдлийн системүүдтэй нийцдэг.

4. Ашиглалтын заавар

4.1 RGB арын гэрэлтүүлгийн хяналт

The keyboard features customizable RGB backlighting with over 16 million color options per key. You can control the lighting effects via:

• Гарын товчлуурууд: Use Fn + various keys (refer to the keyboard's specific key combinations, often indicated on the keycaps or in the software manual) to cycle through lighting modes, adjust brightness, and change animation speed.
• Akko Cloud Driver: For full customization, including per-key lighting, custom effects, and synchronization, use the Akko Cloud Driver software. This allows for precise control over colors, patterns, and speeds.

4.2 Макро програмчлал

The Akko 5108B Plus supports Akko Macro V1.0 for creating custom macros. Use the Akko Cloud Driver software to record and assign complex key sequences to specific keys, enhancing productivity and gaming performance.

4.3 N-Key Rollover (NKRO)

The keyboard supports N-Key Rollover, meaning every key press is registered independently, preventing ghosting or missed key presses even when multiple keys are pressed simultaneously. This feature is active in wired and 2.4G modes.

4.4 Тохируулж болох өндрийг

The keyboard is designed with a tilting stand offering 3 levels of height adjustment. This allows you to customize the typing angle for improved ergonomics and comfort.

5. Засвар үйлчилгээ

5.1 Гарыг цэвэрлэх

• Цэвэрлэхийн өмнө гарыг бүх тэжээлийн эх үүсвэрээс салга.
• Зөөлөн, хөвөнгүй даавууг бага зэрэг хэрэглээрэй dampened with water or a mild cleaning solution to wipe down the keycaps and frame.
• Товчлуурын хоорондох тоос шороо, хог хаягдлыг шахсан агаар эсвэл жижиг сойз ашиглана уу.
• To deep clean keycaps, use the provided keycap puller to remove them. Wash keycaps with mild soap and water, rinse thoroughly, and ensure they are completely dry before reattaching.

5.2 Халуун солих унтраалга

The Akko 5108B Plus features hot-swappable sockets, allowing you to change switches without soldering. It supports both 3-pin and 5-pin mechanical switches.

1. Using the provided switch puller, carefully grip the switch from the top and bottom clips.
2. Шилжүүлэгчийг самбараас салгахын тулд зөөлөн дээш татна уу.
3. Шинэ унтраалгын зүүг хэлхээний самбар дээрх нүхнүүдтэй зэрэгцүүл. Нугалахаас сэргийлж зүүг шулуун байгаа эсэхийг шалгаарай.
4. Press the new switch firmly into place until it clicks. Test the key to ensure it functions correctly.

5.3 Батерейны арчилгаа

• Гарыг хэт өндөр температурт оруулахаас зайлсхий.
• Do not fully discharge the battery frequently; recharge when the battery level is low.
• If storing the keyboard for an extended period, charge it to about 50% to prolong battery life.

6. Алдаа засах

6.1 Гар хариу өгөхгүй байна

• Утастай горим: USB-C кабель нь гар болон компьютерт найдвартай холбогдсон эсэхийг шалгана уу. Өөр USB порт эсвэл кабель ашиглаж үзнэ үү.
• 2.4G утасгүй горим: Check if the 2.4G receiver is properly plugged in. Ensure the keyboard is in 2.4G mode. Try re-pairing by pressing Fn + F1.
• Bluetooth горим: Verify the keyboard is in Bluetooth mode and paired correctly. Re-pair if necessary (Fn + E/R/T/Y/U). Ensure your device's Bluetooth is enabled.
• Check the keyboard's battery level and charge if low.

6.2 RGB Backlighting Not Working/Incorrect

• Ensure the RGB lighting is not turned off via hotkeys (e.g., Fn + L-Alt).
• Adjust brightness using Fn + Up/Down arrow keys.
• If using Akko Cloud Driver, ensure the software is running and settings are applied.
• Try resetting the keyboard to factory defaults (refer to the Akko Cloud Driver manual for specific instructions).

6.3 Түлхүүрүүд бүртгэгдээгүй эсвэл давхар бичиж байна

• This could indicate a faulty switch. Use the switch puller to remove the problematic switch and replace it with a new one.
• Ensure the switch is fully seated in the socket.
• Шилжүүлэгчийн залгуурын эргэн тойрон дахь хог хаягдлыг цэвэрлэ.

6.4 Батерейг цэнэглэхгүй байна

• Ensure the USB-C cable is functional and connected to a working power source.
• Өөр USB-C кабель эсвэл цэнэглэх портыг туршиж үзнэ үү.
• Verify the keyboard's power switch is in the 'On' position (if applicable for charging).

7. Техникийн үзүүлэлтүүд

8. Хэрэглэгчийн зөвлөмж

• Experiment with RGB: Take time to explore the various RGB lighting effects and customization options available through the Akko Cloud Driver to personalize your setup.
• Макро үр ашиг: Utilize the macro programming feature for repetitive tasks in work or complex combos in gaming to significantly boost your efficiency.
• Эргономикийн тохируулга: Don't forget to adjust the keyboard's height using the built-in stand to find the most comfortable typing angle for long sessions.
• Сэлгүүрийн тохируулга: If you desire a different typing feel, take advantage of the hot-swappable sockets to easily try out various 3-pin or 5-pin mechanical switches without needing to solder.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please contact the official Akko customer support or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.