Бүтээгдэхүүн дууссанview
The Bemis 1955CT Commercial Open Front Plastic Toilet Seat is a heavy-duty industrial seat designed for secure installation and long-lasting use. It features check hinges that prevent the seat from going 11 degrees beyond vertical, protecting the flush valve or toilet tank. This product is proudly made in the USA with earth-friendly materials and processes.
Гол онцлогууд:
- Идэмхий бус: Equipped with 300 series stainless steel posts and pintles for durability.
- STA-TITE Commercial Fastening System: Ensures the seat installs with a snap and remains secure, preventing loosening or wiggling.
- Commercial Plastic Construction: Ideal for commercial applications, resisting chips, wear, and stains.
- Бүх нийтийн Fit: Designed to fit all elongated toilets, including popular brands like Kohler, American Standard, and TOTO.
- АНУ-д үйлдвэрлэсэн: Manufactured with environmentally conscious materials and processes.
Зураг: дээрээс доош view of the Bemis 1955CT Elongated White Open Front Toilet Seat.
Image: Visual representation highlighting key features: "Never Loosens. Guaranteed.", "Commercial Grade", "Heavy-Duty", and "No Cover".
Үзүүлэлтүүд
| Өнгө | Цагаан |
| Брэнд | Бемис |
| Материал | Хуванцар |
| Загвар | Сунгасан |
| Хэлбэр | Нээлттэй урд |
| Бүтээгдэхүүний хэмжээс | 18.5"L x 16.5"W |
| Зүйлийн жин | 3.7 фунт |
| Үйлдлийн горим | Гарын авлага |
| Гарал үүслийн улс | Хятад |
| Загварын дугаар | 1955CT 000 |
Суулгах гарын авлага
The Bemis 1955CT toilet seat features the STA-TITE Commercial Fastening System for a secure and stable installation. Follow these steps for proper setup:
1. Determine Toilet Bowl Size:
Before installation, ensure you have the correct seat size (Elongated or Round) for your toilet bowl. Measure the distance from the center of the mounting holes to the front edge of the toilet bowl.
- Учир нь Дугуй bowls, this measurement is typically 16.5 inches.
- Учир нь Сунгасан bowls, this measurement is typically 18.5 inches.
Image: A visual guide demonstrating how to measure your toilet bowl to determine if it is round or elongated.
2. Seat Placement:
Place the toilet seat onto the toilet bowl, aligning the seat's mounting posts with the holes in the toilet ceramic.
Image: A four-step diagram illustrating the installation process, from placing the seat to tightening the hardware.
3. Secure the STA-TITE Fasteners:
From underneath the toilet bowl, thread the STA-TITE nuts (Hardware A) onto the bolts extending from the seat. Lightly finger-tighten them on both sides to hold the seat in place.
4. Эцсийн чангаруулах:
Using a 5/8" (16mm) wrench, tighten the STA-TITE nuts. As you tighten, hold the seat centered on the bowl. Continue tightening until the bottom nut snaps off, indicating that the correct torque has been achieved. Discard the snapped-off portion of the nut. This ensures the seat is securely fastened and will not loosen over time.
Үйл ажиллагаа
The Bemis 1955CT is an open-front toilet seat designed for commercial and heavy-duty use. Its primary function is to provide a stable and durable seating surface. The open-front design is standard in commercial settings for hygiene and ease of use.
The check hinges prevent the seat from opening beyond 11 degrees past vertical, which helps protect the toilet tank and flush valve from damage due to excessive force when raising the seat.
Image: The Bemis 1955CT toilet seat installed on a toilet, with the seat in the raised position.
Засвар үйлчилгээ, арчилгаа
To maintain the glossy finish and extend the life of your Bemis 1955CT toilet seat, clean it regularly with mild soap and water. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the plastic surface and finish.
For best results, wipe the seat dry with a soft cloth after cleaning.
Алдааг олж засварлах
The STA-TITE fastening system is designed to prevent loosening. If your seat feels loose after installation, ensure the STA-TITE nuts were tightened until they snapped off. This mechanism ensures proper torque and a secure fit.
- Сул суудал: If the seat feels loose, re-check the installation of the STA-TITE fasteners. Ensure they were tightened until the bottom nut snapped off. This indicates proper torque.
- Stains/Discoloration: For minor stains, use mild soap and water. Avoid harsh chemicals which can cause permanent damage to the plastic.
- Hinge Issues: The check hinges are designed to prevent over-rotation. If the seat does not stay up or falls back, ensure there are no obstructions and that the hinges are clean.
Баталгаат болон дэмжлэг
The Bemis 1955CT Commercial Open Front Plastic Toilet Seat comes with a manufacturer's warranty that covers purchases in the US and Canada for 1 year from the date of purchase.
For warranty claims, technical support, or further assistance, please refer to the contact information provided on the product packaging or the official Bemis webсайт.
