1. Бүтээгдэхүүн дууссанview
The AGS BL512 is a domestic steel line designed for use in brake, fuel, and transmission systems. This durable component is engineered to provide reliable fluid transfer within automotive applications.
- Төрөл: Brake Hydraulic Line
- Хэсгийн дугаар: 077146359156
- Багцын хэмжээ: 1.27 H x 0.762 L x 33.02 Вт (сантиметр)
- Багцын жин: 0.009 кг
Figure 1: The AGS BL512 steel line, showing its robust construction and threaded fittings at each end, suitable for various automotive fluid transfer applications.
2. Техникийн үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Брэнд | AGS |
| Материал | Ган |
| Өнгө | Мөнгө / Саарал |
| Бүтээгдэхүүний хэмжээс | 13"L x 13"W (as packaged) |
| Зүйлийн жин | 0.32 унц (ойролцоогоор 0.009 кг) |
| Нэрлэсэн хананы зузаан | 1.3 сар (Note: This value may indicate a data anomaly and typically refers to a physical measurement unit.) |
| Гаднах диаметр | 0.75 инч |
| Зүйлийн урт | 33.02 сантиметр (ойролцоогоор 13 инч) |
| UPC | 077146359156 |
| Үйлдвэрлэгчийн хэсгийн дугаар | BL-512 |
3. Тохиргоо ба суурилуулалт
Proper installation of the AGS BL512 line is crucial for safety and performance. This product is intended for professional installation or by individuals with significant automotive repair experience.
3.1 Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ
- Хамгаалалтын шил, бээлий зэрэг хувийн хамгаалалтын хэрэгслийг үргэлж өмс.
- Доор нь ажиллахаасаа өмнө тээврийн хэрэгслийг домкрат эсвэл өргөгч дээр найдвартай бэхэлсэн эсэхийг шалгаарай.
- Цахилгаан эд ангийн ойролцоо ажиллаж байгаа бол тээврийн хэрэгслийн батерейг салга.
- Be aware of hot engine components and exhaust systems.
- Handle brake fluid, fuel, and transmission fluid with care, as they can be corrosive or flammable. Dispose of fluids properly.
3.2 Шаардлагатай багаж хэрэгсэл, материал
- Line wrenches or flare nut wrenches (to prevent rounding off fittings)
- Tubing bender (if custom bends are required)
- Tubing cutter (if custom length is required)
- Flaring tool (if custom flares are required)
- Brake fluid, transmission fluid, or fuel (as applicable)
- Drain pans and rags
3.3 Суулгах үе шатууд (Ерөнхий)
- Бэлтгэл: Identify the old line to be replaced. Clean the surrounding area to prevent contamination.
- Устгах: Carefully disconnect the old line from its fittings. Be prepared for fluid leakage. Note the routing of the original line.
- Forming (if necessary): If the new line needs to be bent to match the original routing, use a tubing bender to create smooth, gradual bends. Avoid kinking the line.
- Суурилуулалт: Route the new AGS BL512 line in the same path as the original. Secure it with appropriate clips or fasteners.
- Холболт: Connect the ends of the new line to the corresponding fittings. Hand-tighten first, then use a line wrench to tighten securely, but do not overtighten.
- Fluid System Specifics:
- Тоормосны шугам: After installation, bleed the brake system thoroughly to remove all air. Check for leaks.
- Түлшний шугам: Check all connections for leaks before starting the engine.
- Transmission Lines: Refill transmission fluid to the correct level and check for leaks.
- Эцсийн үзлэг: Double-check all connections for tightness and ensure the line is not rubbing against any moving parts or sharp edges.
4. Үйл ажиллагааны талаар анхаарах зүйлс
Once installed, the AGS BL512 line operates as an integral part of your vehicle's fluid transfer system. Its function is passive, ensuring the safe and efficient flow of brake fluid, fuel, or transmission fluid as intended by the vehicle manufacturer.
No direct user operation is required for the line itself after proper installation and system bleeding/filling. The line is designed to withstand the pressures and temperatures typical of its intended automotive applications.
5. Засвар үйлчилгээ
The AGS BL512 steel line is a durable component designed for long service life. Regular inspection is recommended as part of routine vehicle maintenance to ensure continued safety and performance.
5.1 Хяналт шалгалтын хуваарь
- Inspect the line during routine oil changes or other under-vehicle inspections.
- Check immediately if you notice any signs of fluid leaks, spongy brakes, or unusual odors (like fuel).
5.2 What to Look For
- Нэвчилт: Any visible fluid weeping or dripping around the line or its connections.
- Зэврэлт: Significant rust or corrosion on the line, especially in areas exposed to road salt or moisture.
- Хохирол: Kinks, dents, cracks, or abrasions on the line.
- Сул холболтууд: Ensure all fittings are tight and secure.
If any issues are detected, it is critical to address them promptly. A compromised brake, fuel, or transmission line can lead to serious safety hazards or vehicle damage. Replacement of the affected line is typically the recommended course of action.
6. Алдаа засах
Troubleshooting issues related to the AGS BL512 line primarily involves identifying and addressing leaks or blockages. Given its passive role, most problems stem from improper installation or physical damage.
6.1 Нийтлэг асуудал ба шийдвэрлэх арга замууд
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Fluid Leak at Connection | Loose fitting, damaged flare, cross-threaded connection | Tighten fitting (do not overtighten). If leak persists, inspect flare and fitting for damage. Replace line or fitting if damaged. Ensure correct threading. |
| Fluid Leak Along Line | Corrosion, physical damage (kink, crack, abrasion) | Replace the damaged section of the line or the entire line. |
| Restricted Fluid Flow (e.g., weak brakes, fuel starvation) | Kinked line, internal blockage (rare for new lines) | Inspect the line for kinks. If kinked, replace. If blockage is suspected, flush or replace the line. |
For any persistent or severe issues, it is highly recommended to consult a qualified automotive technician.
7. Баталгаат хугацаа ба дэмжлэг
For specific warranty information regarding the AGS BL512 Domestic Steel Brake/Fuel/Transmission Line, please refer to the documentation provided with your purchase or visit the official AGS webсайт. Баталгаат нөхцөл нь ихэвчлэн үйлдвэрлэлийн согогийг хамардаг.
If you require technical assistance or have questions about the product, please contact AGS customer support through their official channels. Contact information can usually be found on the product packaging or the manufacturer's webсайт.
AGS Official Webсайт: www.agscompany.com (Тэмдэглэл: Энэ бол орлуулагч юм URL, жинхэнэ албан тушаалтныг баталгаажуулна уу website for AGS)
