Полипропилен ханцуйтай Oatey 31194 жорлонгийн лав цагирагны зааварчилгааны гарын авлага

Танилцуулга

This manual provides detailed instructions for the proper installation and use of the Oatey 31194 Toilet Wax Ring with Polypropylene Sleeve. This product is designed to create a watertight and gas-tight seal between the toilet bowl and the waste line flange.

Image: Oatey 31194 Toilet Wax Ring with Polypropylene Sleeve packaging. The image displays the product packaging, highlighting its features and compatibility with 3" or 4" waste lines and all floor type closet bowls. It also mentions the polypropylene sleeve for a more positive seal and its leak-proof properties against vermin, odors, gases, and acids.

Үзүүлэлтүүд

• Загвар: 31194
• Брэнд: Оатей
• Материал: 100% Pure Petroleum Wax
• Waste Line Compatibility: Fits 3" or 4" waste lines
• Хэрэглээ: Suitable for all floor type closet bowls
• Тамга төрөл: Permanent, leak-proof seal
• Хамгаалалт: Impervious to vermin, odors, gases, and acids
• Онцлог шинж чанар: Polyethylene sleeve extends discharge opening for enhanced seal and proper bowl alignment
• Дагаж мөрдөх: Meets Military Spec. TT-P-1536A
• Барааны жин: 4.8 унц
• Бүтээгдэхүүний хэмжээ: 4 x 4 x 2 инч

Тохиргоо ба суурилуулалт

Proper installation of the Oatey 31194 wax ring is crucial for a leak-free toilet. Follow these steps carefully:

Шаардлагатай багаж хэрэгсэл, материал:

• Oatey 31194 Toilet Wax Ring
• Тохируулах эрэг чангалах түлхүүр эсвэл бахө
• Hacksaw (if bolts need trimming)
• Shims (if floor is uneven)
• New toilet bolts and washers (if not reusing existing)

Суулгах алхамууд:

1. Талбайг бэлтгэх: Ensure the floor around the toilet flange is clean and dry. Remove any old wax or debris from the flange.
2. Dry Fit the Toilet:

   Perform a dry fit of the toilet bowl onto the flange to check if the floor is level. If the toilet rocks or is unstable, use shims to level it appropriately before proceeding with the wax ring installation. This ensures proper contact and seal.
3. Remove Toilet: Carefully lift and remove the toilet bowl from the flange after the dry fit.
4. Position the Wax Ring:

   The Oatey 31194 wax ring can be placed in one of two ways:

   • Сонголт 1 (Давуулагдсан): Place the wax ring directly onto the toilet's discharge opening. Press it firmly to ensure it adheres.
   • Сонголт 2: Place the wax ring directly onto the toilet flange on the floor. Ensure it is centered over the waste opening.

   The integrated polyethylene sleeve should extend into the waste opening, providing a more positive seal and aiding in proper bowl alignment.
5. Ариун цэврийн өрөөг тохируулах:

   Carefully lower the toilet bowl straight down onto the wax ring and flange. Apply firm, even pressure. Give it a small twist to help compress the wax ring and create a seal. Do not rock the toilet, as this can break the seal. Ensure the toilet bolts align with the holes in the toilet base.

6. Жорлонгоо хамгаалах:

   Install the washers and nuts onto the toilet bolts. Hand-tighten them initially, then use an adjustable wrench to tighten them evenly, alternating between bolts. Do not overtighten, as this can crack the toilet base. The toilet should be stable and not rock.

7. Trim Bolts and Install Caps:

   If the toilet bolts are too long, use a hacksaw to cut them to a length that allows the toilet bolt caps to fit securely over them. Place the decorative caps over the bolts.
8. Усан хангамжийг холбох: Reconnect the water supply line to the toilet tank.
9. Нэвчилтийг шалгах: Turn on the water supply and allow the tank to fill. Flush the toilet several times and carefully inspect around the base for any signs of leaks.

Суулгах видео:

Үйл ажиллагааны зарчим

The Oatey 31194 Toilet Wax Ring functions as a compression seal. When the toilet bowl is set onto the flange, the weight of the toilet compresses the wax, creating a watertight and gas-tight barrier. The integrated polypropylene sleeve extends into the waste pipe, guiding the waste flow and providing an additional layer of sealing integrity, ensuring proper alignment and a more positive seal.

Засвар үйлчилгээ

Once properly installed, the Oatey 31194 Toilet Wax Ring requires no ongoing maintenance. It is designed to provide a permanent, leak-proof seal. If a leak occurs at the base of the toilet, it indicates that the wax ring seal has been compromised and requires replacement. The wax ring itself is not reusable once compressed and removed.

Алдааг олж засварлах

• Leak at Toilet Base:

  If water appears around the base of the toilet after flushing, the wax ring seal may be compromised. This can be due to improper installation, an uneven floor causing the toilet to rock, or the wax ring being dislodged. The solution is to remove the toilet, replace the wax ring with a new one, and re-install following the instructions carefully, ensuring the floor is level.
• Toilet Rocks:

  If the toilet rocks after installation, the floor may be uneven, or the bolts may not be tightened evenly. Remove the toilet, check the floor for levelness, and use shims if necessary. Re-install the wax ring and toilet, ensuring bolts are tightened gradually and evenly.

• Odor from Toilet Base:

  A persistent sewer gas odor around the toilet base indicates a broken or improperly sealed wax ring. This allows gases from the drain pipe to escape. The wax ring must be replaced to restore the seal.

Баталгаат болон дэмжлэг

For specific warranty information regarding the Oatey 31194 Toilet Wax Ring, please refer to the product packaging or contact Oatey customer service directly. Oatey products are designed for durability and performance when installed correctly.

For technical assistance or further inquiries, please visit the official Oatey website or contact their customer support department. Contact information can typically be found on the product packaging or their webсайт.

Үйлдвэрлэгч: Оатей

Webсайт: www.oatey.com (This is a general link, specific support links may vary)