Samson SP01 Spider Mount Instruction Manual

1. Танилцуулга

The Samson SP01 Spider Mount is a high-quality shock mount designed to enhance audio recording by isolating microphones from unwanted vibrations. This manual provides essential information for the proper setup, operation, and maintenance of your SP01 Spider Mount.

2. Үндсэн шинж чанарууд

• Vibration Isolation: Designed to isolate the microphone from physical vibrations, floor noise, and stand noise, contributing to clearer audio recordings.
• Бат бөх барилга: Constructed from metal for durability and reliable support.
• Specific Compatibility: Engineered for seamless integration with designated Samson condenser microphones.

3. Compatible Microphones

The Samson SP01 Spider Mount is compatible with the following Samson condenser microphones:

• Самсон C01
• Самсон C03
• Самсон CL7
• Самсон CL8
• Самсон C01U

For optimal performance, ensure your microphone model is listed above.

4. Тохиргоо ба суурилуулалт

Follow these steps to properly attach your Samson SP01 Spider Mount to a microphone stand and install your compatible microphone.

4.1 Attaching to a Microphone Stand

1. Identify the threaded adapter on your microphone stand. The SP01 mount typically uses a standard thread size.
2. Screw the base of the SP01 Spider Mount onto the microphone stand until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: The Samson SP01 Spider Mount shown attached to a microphone stand, illustrating its typical setup.

4.2 Микрофон суурилуулах

1. Gently open the spring-loaded clamps of the Spider Mount.
2. Carefully insert your compatible Samson condenser microphone into the mount, ensuring it is centered and held firmly by the elastic bands.
3. cl-г гаргаamps, allowing the elastic bands to securely cradle the microphone. The elastic suspension system is crucial for isolating vibrations.

Зураг: Ойрын зураг view of a microphone being carefully placed into the elastic suspension of the Samson SP01 Spider Mount.

5. Ажиллагаа ба тохируулга

The Samson SP01 Spider Mount allows for flexible positioning of your microphone.

• Өнцгийн тохируулга: Use the knob on the side of the mount to loosen, adjust the microphone to your desired angle, and then tighten to secure its position.
• Чичиргээ багасгах: The primary function of the Spider Mount is to reduce unwanted vibrations transmitted through the microphone stand. Ensure the elastic bands are intact and properly tensioned for effective isolation.

6. Засвар үйлчилгээ

To ensure the longevity and optimal performance of your Samson SP01 Spider Mount, follow these maintenance guidelines:

• Цэвэрлэгээ: Wipe the metal frame with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Elastic Bands: Periodically inspect the elastic bands for signs of wear, stretching, or breakage. Worn bands may reduce the mount's effectiveness in isolating vibrations. Replacement bands can be sourced from authorized Samson dealers.
• Хадгалах: When not in use, store the mount in a clean, dry environment to prevent damage.

7. Алдаа засах

If you experience issues with your Samson SP01 Spider Mount, consider the following:

• Хэт их чичиргээний чимээ:
  • Микрофоныг уян харимхай туузан дотор зөв байрлуулсан эсэхийг шалгаарай.
  • Check if the elastic bands are worn or broken and replace them if necessary.
  • Verify that the mount is securely tightened to the microphone stand.
• Microphone Slipping:
  • Confirm that your microphone is one of the compatible models.
  • Ensure the elastic bands are providing adequate tension.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

Баталгаат мэдээлэл болон техникийн дэмжлэг авахыг хүсвэл албан ёсны Samson Technologies-ээс лавлана уу webсайт эсвэл харилцагчийн үйлчилгээтэй холбогдоно уу. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.

Нэмэлт нөөц болон бүтээгдэхүүний талаарх мэдээллийг авахыг хүсвэл зочилно уу SAMSON Store on Amazon.