Teknetics T2 Classic металл илрүүлэгч хэрэглэгчийн гарын авлага

Танилцуулга

This manual provides instructions for the assembly, operation, and maintenance of the Teknetics T2 Classic Metal Detector. The T2 Classic is a high-performance, multi-purpose metal detector designed for various applications including coin shooting, relic hunting, and gold prospecting. It incorporates advanced electronic technology and a user-friendly interface for efficient metal detection.

Бүтээгдэхүүн дууссанview

Гол онцлогууд

• Handheld design suitable for various environments.
• Dual-filter discrimination modes for effective target separation in challenging areas.
• Trigger-actuated Fast Grab™ for instant ground cancellation.
• Manual ground cancellation option for precise coil balance.
• Depth detection capability for coins up to 15 inches.
• Magnetic mineralization bar graph for identifying specific metal types.

Бүрэлдэхүүн хэсгүүд

The Teknetics T2 Classic consists of several key components:

• Control Housing with LCD Display
• Search Coil (11-inch)
• Доод иш
• Дээд иш
• Сулгуур
• Бариул
• Зайны тасалгаа

Figure 1: An assembled view of the Teknetics T2 Classic Metal Detector, showing the control housing, search coil, stem, and armrest. The control housing features a large LCD screen and control buttons.

Зураг 2: Ойрын зураг view of the Teknetics T2 Classic's LCD display, showing target identification numbers, discrimination settings, sensitivity, hum level, manual ground cancellation, and menu options.

Тохиргоо

Ассемблей

1. Attach the lower stem to the search coil using the provided bolt and washers. Ensure a snug fit.
2. Insert the lower stem into the upper stem. Adjust the length to a comfortable operating position and secure with the locking collar.
3. Slide the control housing onto the upper stem.
4. Суга түшлэгийг дээд ишэнд бэхлэнэ.
5. Wrap the search coil cable securely around the stem, leaving enough slack for coil movement, and plug the connector into the control housing.

Батерей суурилуулах

The Teknetics T2 Classic requires 4 AA batteries.

1. Locate the battery compartment on the control housing.
2. Зайны тасалгааны тагийг нээ.
3. Тасалгааны дотор заасан зөв туйлшралыг (+/-) ажиглаж 4 АА батерейг оруулна уу.
4. Зайны тасалгааны тагийг сайтар хаа.

Ашиглалтын заавар

Асаах/унтраах

To power on the detector, press and hold the power button located on the control housing. To power off, press and hold the power button again until the unit shuts down.

Үндсэн үйл ажиллагаа

Once powered on, the detector will perform a self-test. The LCD screen will display various parameters.

• Мэдрэмж: Adjust sensitivity to optimize depth and minimize false signals. Higher sensitivity increases depth but can also increase noise.
• Эзлэхүүн: Control the audio output level.
• Босго: Set the background hum level in All Metal mode.

LCD дэлгэц дууссанview

The large LCD screen provides critical information during operation:

• Зорилтот ID: A numerical value (0-99) indicating the probable identity of the detected target.
• Гүний үзүүлэлт: Estimates the depth of the target.
• Mineralization Bar Graph: Displays the level of ground mineralization.
• Menu System: Allows access to various settings and modes.

Ялгаварлан гадуурхах горимууд

Using Discrimination

The T2 Classic features dual-filter discrimination modes to help filter out unwanted metallic objects (trash) while searching for desirable targets.

1. Access the discrimination settings via the menu.
2. Adjust the discrimination level to reject specific types of metals. Lower settings will accept more targets, including iron, while higher settings will reject more ferrous and some non-ferrous items.
3. Experiment with different discrimination levels in your search area to find the optimal balance between target detection and trash rejection.

Ground Cancellation

Fast Grab™ Ground Cancellation

The trigger-actuated Fast Grab™ feature allows for quick and automatic ground balancing. This is essential for stable operation and accurate target identification, especially in mineralized ground.

1. Hold the search coil parallel to the ground and pump it up and down from 6 inches to 1 inch above the ground.
2. While pumping, press and hold the trigger. The detector will automatically adjust to the ground conditions.
3. Release the trigger once the ground balance is stable.

Manual Ground Cancellation

For more precise ground balancing, the T2 Classic offers a manual ground cancellation option. This allows for fine-tuning the ground balance to specific soil conditions.

1. Enter the manual ground cancellation menu.
2. Adjust the ground balance setting incrementally while pumping the coil over the ground until the audio response is smooth and consistent.

Зорилтот тодорхойлох

Interpreting Target ID

The Target ID number on the LCD screen provides a numerical indication of the detected metal's conductivity. Different metals will typically produce different ID ranges.

• Бага тоо (жишээ нь, 0-20): Ихэнхдээ төмөр эсвэл жижиг төмрийн объектуудыг заадаг.
• Mid numbers (e.g., 20-60): Can indicate foil, nickel, pull tabs, or small gold items.
• High numbers (e.g., 60-99): Typically indicate copper, silver, or larger brass objects.

Magnetic Mineralization Bar Graph

This graph provides a visual representation of the ground's magnetic mineralization. Understanding this can help in distinguishing between ground signals and actual targets, especially in highly mineralized areas.

Засвар үйлчилгээ

Цэвэрлэгээ

Хэрэглэсний дараа детекторыг зар сурталчилгаагаар арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагч хэрэглэхээс зайлсхий.

Хадгалах

Store the detector in a dry, cool place. Remove batteries if the detector will not be used for an extended period to prevent leakage.

Search Coil Care

The search coil is waterproof, but the control housing is not. Avoid submerging the control housing. Protect the search coil from impacts.

Алдааг олж засварлах

Нийтлэг асуудал ба шийдэл

Хүч чадалгүй

• Батерейны суурилуулалтыг шалгаж, батерей нь шинэ эсэхийг шалгаарай.
• Verify battery compartment cover is securely closed.

Erratic Signals or False Alarms

• Re-perform ground cancellation.
• Мэдрэмжийн тохиргоог багасгах.
• Check for nearby electromagnetic interference (power lines, other electronics).
• Ensure search coil cable is wrapped tightly around the stem.

Poor Depth Detection

• Increase sensitivity, if ground conditions allow.
• Газрын тэнцвэрт байдлыг хангах.
• Батерейны түвшинг шалгана уу.

Үзүүлэлтүүд

Teknetics T2 Classic Metal Detector

Баталгаат болон дэмжлэг

Баталгаат хугацааны мэдээлэл

For specific warranty details, please refer to the warranty card included with your product or contact Teknetics customer service.

Хэрэглэгчийн дэмжлэг

If you require assistance or have questions regarding your Teknetics T2 Classic Metal Detector, please visit the official Teknetics webсайтад зочлох эсвэл тэдний хэрэглэгчийн дэмжлэгийн хэлтэстэй холбогдоно уу.

Teknetics Official Store on Amazon