1. Бүтээгдэхүүн дууссанview
The Yuasa YTX H Series AGM Battery (Model YUAM72H4A) is a high-performance, factory-activated battery designed for various applications requiring reliable power. This battery features advanced lead-calcium technology, which allows it to maintain its specific gravity significantly longer than conventional lead-antimony batteries. Its Absorbed Glass Mat (AGM) separators absorb the electrolyte, making the battery non-spillable. The valve-regulated design eliminates water loss, removing the need for refilling. This battery is factory-activated, meaning it is pre-filled with electrolyte, sealed, and charged at the factory, ready for immediate use.
Гол онцлогууд нь:
- Up to 30% more cold cranking amps for increased power.
- Advanced lead-calcium technology for extended charge retention.
- Absorbed Glass Mat (AGM) separators for a non-spillable design.
- Valve-regulated design eliminates water loss and maintenance.
- Factory Activated (FA) for immediate use upon purchase.

Figure 1: Yuasa YUAM72H4A YTX14AH Factory Activated H Series AGM Battery. This image displays the top and front of the battery, showing the positive and negative terminals, the Yuasa branding, and key specifications printed on the label. Included are the terminal screws and nuts for installation.
2. Аюулгүй байдлын мэдээлэл
Always prioritize safety when handling batteries. Failure to follow these instructions can result in serious injury or property damage.
- АЮУЛ/ХОР: This battery contains sulfuric acid, which can cause blindness or severe burns upon contact.
- НҮД ХАМГААЛАХ: Always wear appropriate eye protection (safety goggles) when working with batteries.
- EXPLOSIVE GASES: Batteries produce explosive gases. Keep sparks, flames, and smoking materials away from the battery. Ensure adequate ventilation.
- ХҮҮХЭД ХҮРЭХГҮЙ ГАЗАР ХАДГАЛАХ: Store batteries in a secure location inaccessible to children.
- АНХНЫ ТУСЛАМЖ: In case of contact with acid, flush eyes immediately with water for at least 15 minutes and seek medical help fast. For skin contact, wash thoroughly with soap and water.
- СУУЛГАЛТ: Read the complete instruction manual carefully before installation or use.
- УСТГАХ: Do not dispose of batteries in household waste. Recycle properly at an authorized facility.
3. Тохиргоо ба суурилуулалт
The Yuasa YUAM72H4A battery is Factory Activated (FA), meaning it comes pre-filled, sealed, and charged, ready for installation. No initial electrolyte filling or charging is required.
3.1 Суулгахад бэлтгэх
- Ensure the vehicle's ignition is off and the key is removed.
- Locate the existing battery in your vehicle.
- Нүдний хамгаалалт, бээлий зэрэг хамгаалалтын зохих хэрэгслийг өмс.
3.2 Хуучин батерейг салгах
- Disconnect the negative (-) terminal first, followed by the positive (+) terminal.
- Carefully remove any battery hold-down straps or clamps.
- Lift the old battery out of its compartment. Be mindful of its weight.
- Inspect the battery tray and cables for corrosion or damage. Clean as necessary.
Video 1: Battery Removal and Installation. This video demonstrates the process of removing an old battery and installing a new one in a motorcycle, including disconnecting and reconnecting terminals.
3.3 Шинэ батерей суурилуулах
- Place the new Yuasa YUAM72H4A battery into the battery compartment. Ensure it sits securely.
- Secure the battery with any hold-down straps or clamps.
- Эхлээд эерэг (+) терминалыг, дараа нь сөрөг (-) терминалыг холбоно. Холболтууд нягт байгаа эсэхийг шалгаарай.
- Apply a thin coat of dielectric grease to the terminals to prevent corrosion.
Video 2: Motorcycle Battery Wiring Guide. This video provides a detailed guide on correctly wiring a motorcycle battery, emphasizing the proper sequence for connecting positive and negative terminals.
4. Ашиглалтын заавар
Once installed, the Yuasa YUAM72H4A battery is ready to power your vehicle. Ensure all electrical connections are secure before starting the engine.
- The battery provides 12 volts of power for starting and operating vehicle electronics.
- Avoid excessive discharge, as this can shorten battery life.
- If the vehicle is not used for extended periods, consider using a trickle charger to maintain the battery's charge.
5. Засвар үйлчилгээ
While the Yuasa YTX H Series AGM battery is maintenance-free in terms of electrolyte refilling, regular checks can extend its lifespan and ensure optimal performance.
- Терминалын үзлэг: Periodically check battery terminals for cleanliness and tightness. Clean any corrosion with a wire brush and baking soda solution, then rinse with water and dry thoroughly.
- Зайны хайрцаг: Keep the battery case clean and dry. Inspect for any signs of damage or cracks.
- Цэнэглэж байна: If the vehicle is stored or used infrequently, connect the battery to a suitable battery maintainer or trickle charger to prevent self-discharge. This helps prolong battery life.
- Хадгалах: When storing the battery for long periods, ensure it is fully charged and stored in a cool, dry place. Recharge every 3-6 months if not connected to a maintainer.
6. Алдаа засах
If you encounter issues with your Yuasa YUAM72H4A battery, consider the following common troubleshooting steps:
- Engine Cranks Slowly or Not at All: This often indicates a low battery charge. Check the battery voltage with a multimeter. If below 12.4V, recharge the battery. Also, inspect terminals for corrosion and ensure they are tightly connected.
- Гэрэл бүдэг эсвэл анивчих: Similar to slow cranking, this suggests a low battery charge or poor connections. Verify voltage and terminal integrity.
- Батерей цэнэглээгүй: After charging, if the battery quickly loses its charge, it might be due to a parasitic drain in the vehicle's electrical system or the battery has reached the end of its service life. Consult a professional for parasitic drain diagnosis.
- Хавдсан батерейны хайрцаг: A swollen battery case indicates overcharging or internal damage. Discontinue use immediately and replace the battery.
For persistent issues, consult a qualified technician or contact Yuasa customer support.
7. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | YUAM72H4A (YTX14AH) |
| Зайны төрөл | Factory Activated H Series AGM Battery |
| Ботьtage | 12 В |
| Capacity (10HR) | 12 Ах |
| Capacity (20HR) | 12.6 Ах |
| Хүйтэн цохиулах Amps (CCA @ 0°F) | 210 А |
| Ердийн цэнэгийн гүйдэл | 1.2 Amp |
| Урт | 5 5/16 инч (134 мм) |
| Өргөн | 3 1/2 инч (89 мм) |
| Өндөр | 6 9/16 in (166 mm) (Includes 10mm height spacer) |
| Хүчилтэй жин | 11.1 фунт |
| Терминал төрөл | F2 терминал |
| Технологи | Advanced Lead-Calcium, Absorbed Glass Mat (AGM) |
8. Баталгаат хугацааны мэдээлэл
For specific warranty details regarding your Yuasa YUAM72H4A battery, please refer to the warranty card included with your product or visit the official Yuasa website. Warranty coverage typically includes defects in materials and workmanship under normal use and service conditions.
9. Дэмжлэг
If you require further assistance, have questions about your battery, or need technical support, please contact Yuasa customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your battery model number (YUAM72H4A) and purchase details readily available.





