TP-Link TL-SF1008P 8-Port 10/100Mbps PoE+ Switch User Manual

1. Бүтээгдэхүүн дууссанview

The TP-Link TL-SF1008P is an 8-Port 10/100Mbps Desktop Switch with 4 PoE+ Ports, designed to provide a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Four of the eight Auto-Negotiation RJ45 ports (Port 1 to Port 4) support Power over Ethernet (PoE+) functionality. These PoE+ ports can automatically detect and supply power to IEEE 802.3at/af compliant Powered Devices (PDs).

This switch allows for the transmission of electrical power along with data over a single cable, enabling network expansion in locations without readily available power lines or outlets. It is suitable for powering devices such as Access Points (APs), IP Cameras, or IP Phones.

Зураг 1: Урд view of the TP-Link TL-SF1008P PoE+ Switch.

2. Багцын агуулга

Таны багц дараах зүйлсийг агуулж байгаа эсэхийг шалгана уу.

• TL-SF1008P Switch
• Эрчим хүчний адаптер
• Цахилгааны утас
• Суулгах гарын авлага
• Резинэн хөл

3. Тохиргоо ба суурилуулалт

The TL-SF1008P is designed for easy installation and use, requiring no software configuration. It features a plug-and-play design.

3.1 Физик суурилуулалт

The switch can be placed on a desktop or mounted on a wall. Ensure adequate ventilation around the device.

Figure 2: Simple Plug and Play setup involves plugging in the power and connecting devices.

3.2 Төхөөрөмжүүдийг холбох

Connect your network devices (e.g., router, NVR, computers, printers, IP cameras, IP phones, access points) to the RJ45 ports on the switch. Ports 1-4 are PoE+ enabled.

Зураг 3: Жишээ ньample application scenario showing the TL-SF1008P connecting various devices, including PoE-powered ones.

4. Үйлдлийн горим ба онцлог

The TL-SF1008P offers several features to optimize network performance and reliability.

4.1 Өргөтгөх горим

Extend Mode allows for data and power PoE transmission over distances up to 250 meters, which is ideal for surveillance systems where devices may be located far from the switch. When Extend Mode is active, the port speed will be downgraded to 10 Mbps.

Figure 4: Comparison of standard 100m transmission and 250m Extend Mode transmission for IP cameras.

4.2 Priority Mode

The switch incorporates a priority function to protect the system when the total PoE power consumption exceeds the budget. If the power consumption of all PoE PDs is greater than or equal to 53W, a priority will be assigned among the PoE ports (Port 1 > Port 2 > Port 3 > Port 4). The system will then cut off power to the lowest-priority port to protect the system. This mode ensures high-quality transmission for critical applications like video or voice data.

4.3 PoE автоматаар сэргээх

PoE Auto Recovery automatically detects and reboots unresponsive PoE-powered devices. This feature eliminates the need for manual monitoring or resetting, enhancing system reliability.

Figure 5: Diagram illustrating the PoE Auto Recovery function, which reboots unresponsive PoE devices.

5. Техникийн үзүүлэлтүүд

6. Засвар үйлчилгээ

To ensure optimal performance and longevity of your TP-Link TL-SF1008P switch, consider the following maintenance guidelines:

• Байгаль орчны нөхцөл: Operate the switch within the specified temperature range (0°C to 40°C) and humidity levels. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
• Цэвэрлэгээ: Шилжүүлэгчийн гадна талыг зөөлөн, хуурай даавуугаар үе үе цэвэрлэж байгаарай. Шингэн эсвэл аэрозоль цэвэрлэгч бүү ашиглаарай. Агааржуулалтын нүхнүүд нь тоос шороо, бөглөрөлгүй байгаа эсэхийг шалгаарай.
• Кабелийн менежмент: Keep network cables organized and properly secured to prevent accidental disconnections or damage.
• Эрчим хүчний хангамж: Use only the provided power adapter. Ensure the power connection is secure and stable.

7. Алдаа засах

If you encounter issues with your TL-SF1008P switch, consider the following basic troubleshooting steps:

• Эрчим хүчгүй: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check the power LED indicator on the switch.
• Холбоос/Үйл ажиллагаа байхгүй: Verify that the Ethernet cables are correctly connected to both the switch and the connected device. Check the Link/Act LEDs for the respective ports. Try using a different Ethernet cable.
• PoE төхөөрөмж асахгүй байна: Confirm that the connected device is IEEE 802.3at/af compliant. Check the PoE Max LED on the switch; if it's red, the system power might be overloaded, and Priority Mode may be active. Ensure the total power consumption of all PoE devices does not exceed the 66W budget.
• Slow Connection in Extend Mode: This is expected behavior. When Extend Mode is active, the port speed is intentionally reduced to 10 Mbps to achieve longer transmission distances.

Илүү дэлгэрэнгүй алдааг олж засварлах эсвэл байнгын асуудлуудын талаар дэмжлэгийн хэсгээс лавлана уу.

8. Баталгаат хугацаа ба дэмжлэг

The TP-Link TL-SF1008P is backed by an industry-leading 3-year warranty.

8.1 Техникийн дэмжлэг

Үнэгүй техникийн дэмжлэгийг Даваагаас Баасан гараг хүртэл өглөөний 6 цагаас оройн 6 цаг хүртэл авах боломжтой.

For assistance, you can contact TP-Link support:

• Утас: (866) 225-8139
• Webсайт: myproducts.tp-link.com/us
• Имэйл: support.USA@tp-link.com

Figure 6: TP-Link contact information for support.