Arnott AS-2121

Arnott Air Suspension Products Logo

Arnott AS-2121 Air Shock

Суурилуулалт, засвар үйлчилгээний гарын авлага

Загвар: AS-2121

1. Танилцуулга

This manual provides essential information for the proper installation, operation, and maintenance of your Arnott AS-2121 Air Shock. The Arnott AS-2121 is a completely rebuilt OE Mercedes left front air strut, featuring a Continental ContiTech air spring bladder. This part is specifically designed for Mercedes E-Class sedan vehicles equipped with 4MATIC (model years 2003-2009).

Please read this manual thoroughly before attempting any installation or maintenance procedures. Incorrect installation can lead to product failure, vehicle damage, or personal injury.

2. Аюулгүй байдлын мэдээлэл

3. Багцын агуулга

Суурилуулалт эхлэхээс өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.

Two Arnott AS-2121 Air Shocks with installation components

Image: Arnott AS-2121 Air Shocks and included installation hardware.

4. Тохиргоо ба суурилуулалт

This section outlines the general steps for replacing an air shock. Always refer to the specific service manual for your Mercedes E-Class (2003-2009) with 4MATIC for detailed, vehicle-specific instructions and torque specifications.

4.1 Суулгахын өмнөх үе шатууд

  1. Park the vehicle on a level, hard surface.
  2. Зогсоолын тоормосыг асаана уу.
  3. Тээврийн хэрэгслийн батерейны сөрөг терминалыг салга.
  4. Raise the vehicle and support it securely with jack stands. Ensure the suspension is fully extended.
  5. Depressurize the air suspension system according to the vehicle manufacturer's guidelines. This typically involves using a diagnostic tool or following a specific procedure to release air from the system.
  6. Remove the wheel from the corner where the air shock is to be replaced.

4.2 Removal of Old Air Shock

  1. Locate and disconnect the air line from the top of the old air shock. Be careful not to damage the fitting.
  2. Disconnect any electrical connectors attached to the air shock.
  3. Remove the upper mounting bolts/nuts securing the air shock to the vehicle chassis.
  4. Remove the lower mounting bolts/nuts securing the air shock to the control arm or knuckle.
  5. Carefully remove the old air shock from the vehicle. It may be under some residual tension.

4.3 Installation of New Arnott AS-2121 Air Shock

Single Arnott AS-2121 Air Shock

Image: Arnott AS-2121 Air Shock, ready for installation.

  1. Position the new Arnott AS-2121 Air Shock into the vehicle's suspension assembly.
  2. Secure the lower mounting bolts/nuts first, but do not fully tighten them yet.
  3. Align and secure the upper mounting bolts/nuts.
  4. Connect the air line to the new air shock. Ensure a secure, leak-free connection.
  5. Reconnect any electrical connectors.
  6. Чухал: With the vehicle still on jack stands, reconnect the battery and inflate the air suspension system to the manufacturer's recommended pressure. Check for air leaks using a soapy water solution around all connections.
  7. Once the system is pressurized and no leaks are detected, lower the vehicle to the ground.
  8. With the vehicle's weight on the suspension, fully tighten all mounting bolts and nuts to the vehicle manufacturer's specified torque values.
  9. Perform a final check of all connections and ensure proper ride height.

5. Үйл ажиллагааны талаар анхаарах зүйлс

After installation, the air suspension system will automatically adjust to maintain the correct ride height. It is normal for the compressor to activate periodically to maintain system pressure. Pay attention to any unusual noises or changes in vehicle handling.

6. Засвар үйлчилгээ

Regular inspection and maintenance can extend the life of your Arnott AS-2121 Air Shock and the overall air suspension system.

7. Алдаа засах

If you experience issues with your air suspension, consider the following common problems and potential solutions:

Асуудал Боломжит шалтгаан Шийдэл
Vehicle sits too low or unevenly Air leak in the air shock or air line; faulty air compressor; height sensor issue. Inspect air lines and shock for leaks. Check compressor operation. Consult a technician for sensor diagnosis.
Компрессор хэт их ажилладаг Small air leak in the system; compressor nearing end of life. Check for minor leaks. If no leaks, compressor may need replacement.
Rough or bouncy ride Incorrect air pressure; internal shock failure. Verify system pressure. If issue persists, shock may need inspection by a professional.
Warning light on dashboard System fault detected (e.g., leak, sensor error, compressor failure). Have the vehicle scanned for diagnostic trouble codes (DTCs) by a qualified technician.

For complex issues or if you are unsure about a diagnosis, always consult a certified automotive technician.

8. Техникийн үзүүлэлтүүд

Хажуу тал view of Arnott AS-2121 Air Shock

Зураг: Side profile of the Arnott AS-2121 Air Shock.

9. Баталгаат хугацаа ба дэмжлэг

Arnott products are designed for durability and performance. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official Arnott website. For technical support or further assistance, please contact Arnott customer service through their official channels.

Холбогдох баримт бичиг - AS-2121

Урьдчилсанview Mercedes E-Class/CLS (W211/W219)-д зориулсан Arnott SK-3039 загварын арын амортизаторын суурилуулалтын гарын авлага
Mercedes-Benz E-Class болон CLS (W211/W219) загваруудад зориулагдсан, Arnott-ын SK-3039 загварын дахин үйлдвэрлэсэн арын амортизаторын дэлгэрэнгүй угсралтын заавар. Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ, буулгах, суурилуулах алхмуудыг багтаасан болно.
Урьдчилсанview Mercedes-Benz E-Class (W211) болон CLS-Class (W219) загваруудад зориулсан Arnott AS-2786 урд зүүн агаарын тулгуур суурилуулах гарын авлага
Comprehensive installation guide for the Arnott AS-2786 front left air strut, designed for Mercedes-Benz E-Class (W211) and CLS-Class (W219) vehicles equipped with AIRMATIC suspension (excluding 4MATIC and AMG models). Includes detailed removal steps, safety precautions, and contact information.
Урьдчилсанview Arnott C-2956 Coil Spring Conversion Kit Installation Manual for Mercedes-Benz S550 (W221)
This installation manual provides step-by-step instructions for fitting the Arnott C-2956 Coil Spring Conversion Kit to a Mercedes-Benz S550 (W221). It covers the removal of original air struts, installation of new coil spring struts, and the Electronic Bypass Module (EBM), along with essential safety precautions.
Урьдчилсанview Арноттын хийн амортизаторын эд ангийн каталог 2020 | Дээд зэрэглэлийн автомашины сэлбэг хэрэгсэл
Explore the Arnott Air Suspension 2020 Parts Catalog, featuring a comprehensive range of air springs, struts, compressors, and conversion kits for luxury vehicles. Trusted quality and innovation for over 30 years.
Урьдчилсанview Infiniti QX56/QX80 болон Nissan Armada загварын арын хийн цочролыг суурилуулах гарын авлага Arnott AS-3285
Infiniti QX56/QX80 (Z62) болон Nissan Armada (Y62) тээврийн хэрэгсэлд зориулагдсан Arnott AS-3285 шинэ арын хийн амортизаторын дэлгэрэнгүй суурилуулах гарын авлага. Алхам алхмаар салгаж авах, суурилуулах зааврыг багтаасан болно.
Урьдчилсанview Арнотт агаарын амортизаторын компрессорын реле үйлчилгээний товхимол 21-8695
Technical service bulletin from Arnott regarding the mandatory replacement of the air suspension compressor relay for various Audi, Jaguar, Mercedes-Benz, Land Rover, BMW, Volkswagen, and Porsche models to prevent damage and warranty issues. Includes specific relay locations for each vehicle model.