Бүтээгдэхүүн дууссанview
The Klein Tools NCVT-2 is a dual-range non-contact voltage tester designed for automatically detecting both low voltage ба стандарт ботьtage in electrical systems. It features visual and audible indicators to alert users to the presence of AC voltage, enhancing safety during electrical work. Its durable construction and compact design make it a reliable tool for professionals and DIY enthusiasts.
Гол онцлогууд:
- Automatic Dual-Range Detection: Automatically detects low voltage (12-48 VAC) and standard voltage (48-1000 VAC).
- Non-Contact Operation: Хувьсах гүйдлийн хүчийг найдвартай илрүүлдэгtagд дамжуулагчтай шууд харьцахгүйгээр.
- Харагдах ба сонсогдох үзүүлэлтүүд: A bright green LED indicates the tester is operational. Flashing red LED and distinct warning tones signal voltage илрүүлэх.
- Worklight Functionality: High-intensity green LED also functions as a worklight for illuminating dark areas.
- Автомат унтрах: Conserves and extends battery life.
- Удаан эдэлгээтэй барилга: Lightweight, durable polycarbonate plastic resin construction with 9.8-foot / 3 m drop protection.
- Аюулгүй байдлын үнэлгээ: CAT IV 1000V safety rating, conforms to CE requirements.
Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Саармаг эсвэл газардуулгын утсыг хүчдэлгүй гэж хэзээ ч бүү бод. Олон утастай салаалсан хэлхээний саармаг нь салгах үед хүчдэлтэй байж болох тул тэдгээрийг зохицуулахын өмнө дахин шалгах шаардлагатай.
- Always test on a known live circuit before and after use to ensure the tester is functioning correctly.
- Do not use if the tester appears damaged or is not operating properly.
- Adhere to all local and national safety codes.
Тохиргоо
Батерей суурилуулах:
- Unscrew the cap at the rear of the tester.
- Insert two (2) 1.5V AAA Alkaline batteries, ensuring correct polarity (+/-).
- Securely screw the cap back onto the tester.
- Press the power button to confirm the green LED illuminates, indicating proper battery installation and functionality.
Figure 1: Klein Tools NCVT-2 Voltage Tester, showing the overall design and cap for battery access.
Ашиглалтын заавар
Асаах/унтраах ба горимын сонголт:
- Асаахын тулд: Press and hold the power button for approximately 1 second. The green LED will illuminate, indicating the tester is ready for use in dual-range mode (12-1000 VAC).
- To Switch to Standard Voltage Only Mode: While the tester is on, press the power button briefly. The blue LED will turn off, and the green LED will remain on, indicating standard voltage detection (48-1000 VAC).
- To Switch Back to Dual-Range Mode: Press the power button briefly again. The blue LED will illuminate along with the green LED.
- Унтраахын тулд: Press and hold the power button until the LEDs turn off. The tester also features an auto power-off function after a period of inactivity to conserve battery life.
Ботьtage Илрүүлэх:
- Ensure the tester is powered on and the green LED is illuminated.
- Place the tip of the tester near the conductor, outlet slot, or insulated wire you wish to test.
- Хэрэв AC voltage is detected, the red LED will flash, and an audible tone will sound. The frequency of the beeps and flashes increases as the tester gets closer to the voltage эх сурвалж.
- Бага хэмжээний хувьдtage (12-48 VAC) detection, ensure the tester is in dual-range mode (green and blue LEDs illuminated).
- Стандарт ботьtage (48-1000 VAC) detection, either dual-range mode or standard voltage only mode can be used.
Figure 2: Using the NCVT-2 to test for voltage in an electrical outlet.
Worklight Function:
- The high-intensity green LED at the tip of the tester can be used to illuminate the workspace, especially in dimly lit areas.
Засвар үйлчилгээ
- Зай солих: Replace batteries when the green LED fails to illuminate or the tester does not respond as expected. Refer to the 'Battery Installation' section for instructions.
- Цэвэрлэгээ: Wipe the tester with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- Хадгалах: Шалгагчийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
Алдааг олж засварлах
- Tester does not turn on: Зайны суурилуулалтыг шалгаж, шаардлагатай бол зайгаа солино.
- Зөрчилтэй уншилтууд: Ensure the tester tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors or interference can sometimes affect readings.
Үзүүлэлтүүд
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Брэнд | КЛЕИН ХЭРЭГСЭЛ |
| Загварын дугаар | NCVT-2 |
| Эрчим хүчний эх үүсвэр | 2 x AAA 1.5V Alkaline Batteries (included) |
| Мин. Үйлдлийн ботьtage | 12 вольт хувьсах гүйдэл |
| Макс. Үйлдлийн ботьtage | 1000 вольт хувьсах гүйдэл |
| Аюулгүй байдлын үнэлгээ | CAT IV 1000 В |
| Уналтын хамгаалалт | 9.8 фут / 3 м |
| Зүйлийн жин | 0.8 унц |
| Материал | Polycarbonate Plastic Resin |
| Онцлог шинж чанарууд | 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) |
Баталгаат болон дэмжлэг
The Klein Tools NCVT-2 Voltage Tester comes with a 2 жилийн баталгаат хугацаа худалдан авсан өдрөөс.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Klein Tools webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.
Figure 3: Klein Tools NCVT-2 Voltage Tester, showcasing its dual-range capabilities and safety features.
