Танилцуулга
The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer is designed to automate your watering schedule, providing convenience and water conservation. This manual will guide you through the installation, programming, and maintenance of your new watering timer.
Figure 1: Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer.
Тохиргоо
Setting up your Orbit watering timer is a straightforward process that requires no special tools. Follow these steps for proper installation:
- Батерей суурилуулах: Locate the battery compartment on the back of the timer. Insert two (2) 1.5V AAA alkaline batteries, ensuring correct polarity. The timer retains its program even when batteries are changed.
- Крант холбох: Connect the timer to your outdoor hose faucet. The swivel coupling allows for quick and secure attachment without twisting the timer body. Ensure the connection is hand-tight to prevent leaks.
- Хоолойг холбох: Цэцэрлэгийн хоолойгоо таймерын доод хэсэгт байрлах залгуурт холбоно уу.
Figure 2: Attaching the timer to a hose faucet.
Figure 3: The swivel coupling for easy attachment.
Ашиглалтын заавар
The Orbit timer features an easy-to-use dial and a large digital display for simple programming. The dial cycles through various settings, allowing you to customize your watering schedule.
Програмчлалын алхамууд:
- Цаг тохируулах: Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to set the current time.
- Эхлэх цаг: Turn the dial to 'START TIME'. Use the '+' and '-' buttons to select when you want watering to begin.
- Хэр удаан: Turn the dial to 'HOW LONG'. Use the '+' and '-' buttons to set the duration of each watering cycle (from 1 to 240 minutes).
- Хэр олон удаа: Turn the dial to 'HOW OFTEN'. Use the '+' and '-' buttons to set the frequency of watering (e.g., every 6 hours, 12 hours, or from once a day up to once every 7 days).
- Run Program (Auto): Turn the dial to 'AUTO'. The timer will now run according to your programmed schedule.
Figure 4: The large digital display and intuitive dial for easy programming.
Figure 5: Water frequencies can be set from every 6 hours to once every 7 days.
Figure 6: Set watering duration from 1 to 240 minutes.
Бороо хойшлуулах функц:
To conserve water during rainy periods, you can activate the rain delay feature. While the dial is set to 'AUTO', press the '+' button. This will pause your watering schedule for 24, 48, or 72 hours. The timer will automatically resume the program after the selected delay period.
Figure 7: Activating the rain delay feature.
Гар аргаар услах:
To water manually without interrupting your programmed schedule, press the 'MANUAL' button. You can then use the '+' and '-' buttons to set a manual watering duration. The timer will revert to its programmed schedule once the manual watering is complete.
Бүтээгдэхүүн дууссанview Видео:
Видео 1: Дууслааview of the Orbit Hose Faucet Timer's features and operation.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Orbit watering timer, follow these maintenance guidelines:
- Зай солих: Replace batteries annually or when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
- Температурын талаар анхаарах зүйлс: The timer is designed for outdoor use but should be protected from extreme temperatures. Do not operate at temperatures exceeding 120°F (49°C) or below 32°F (0°C).
- Өвлийн агуулах: Before the first frost, remove the timer from the faucet, remove the batteries, and store it indoors in a location where temperatures remain above 32°F (0°C). Freezing temperatures can cause damage to the internal components.
- Цэвэрлэгээ: Periodically check the filter washer located in the timer's inlet for debris. Clean if necessary to maintain proper water flow.
Figure 8: Back of the timer with battery information and temperature warnings.
Алдааг олж засварлах
If you encounter issues with your Orbit watering timer, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Цаг хэмжигч асахгүй эсвэл дэлгэц хоосон байна. | Дууссан эсвэл буруу суурилуулсан батерей. | Зөв туйлшралыг хангаж, батерейг шинэ 1.5V AAA шүлтлэг батерейгаар солино уу. |
| Timer does not water at scheduled time. | Incorrect programming; low water pressure; rain delay active; manual mode active. | Verify programming steps. Ensure water faucet is fully open. Check if rain delay is active and disable if needed. Ensure timer is in 'AUTO' mode. |
| Холболтоос ус гоожиж байна. | Loose connections; missing or worn washer; damaged threads. | Tighten connections. Check and replace rubber washer if damaged or missing. Ensure threads are not cross-threaded. |
| Timer does not shut off water. | Internal valve malfunction; debris in valve. | Try resetting the timer by removing batteries for 60 seconds. If problem persists, contact customer support. |
Үзүүлэлтүүд
- Загварын дугаар: AZ62061
- Өнгө: Ногоон
- Материал: Хуванцар
- Бүтээгдэхүүний хэмжээ: 5"D x 3"W x 5"H
- Барааны жин: 0.01 унц
- Тохиргооны тоо: 7
- Дэлгэцийн хэмжээ: 2 инч
- Шаардлагатай батерей: Yes (2 x AAA)
- Ажлын хамгийн их даралт: 100 PSI
- Ашиглалтын температурын хүрээ: 32°F - 120°F (0°C - 49°C)
- Гарал үүслийн улс: Хятад
- UPC: 046878912137, 046878620612
Баталгаат болон дэмжлэг
The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer comes with a 6 жилийн эд ангиудын баталгаа. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна.
For technical support, warranty claims, or additional information, please visit the official Orbit webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Худалдан авалтын баримтаа баталгаат хугацаагаар хадгалах.
Та мөн дэлгэрэнгүй мэдээллийг албан ёсны PDF хэрэглэгчийн гарын авлагаас авч болно. Хэрэглэгчийн гарын авлага (PDF) татаж авах
