SINGER Cordless Smart Scissors Instruction Manual

Танилцуулга

Thank you for choosing the SINGER Cordless Smart Scissors. This innovative cutting tool is designed to provide effortless cutting for various materials, enhancing your crafting and household tasks. Please read this manual thoroughly before first use to ensure safe and optimal operation of your device.

Image: The SINGER Cordless Smart Scissors, a white handheld device designed for easy cutting. It features an ergonomic handle and a visible cutting blade mechanism.

Аюулгүй ажиллагааны зааварчилгаа

Гал түймэр, цахилгаанд цохиулах, гэмтэх эрсдэлийг бууруулахын тулд цахилгаан хэрэгсэл ашиглахдаа аюулгүй байдлын үндсэн арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Keep hands and body parts away from the cutting blades during operation.
• Do not allow children to operate this device. Store out of reach of children.
• Use only for intended purposes as described in this manual.
• Төхөөрөмжийг ус болон бусад шингэнд дүрж болохгүй.
• Turn off and remove batteries before cleaning or changing blades.
• Inspect blades for damage before each use. Replace dull or damaged blades immediately.
• Do not attempt to cut extremely hard or thick materials that may damage the blades or motor.

Багцын агуулга

Бүх зүйл байгаа эсэхийг шалгахын тулд багцын агуулгыг шалгана уу:

• 1 x SINGER Cordless Smart Scissors unit
• 1 x Set of Replacement Blades
• 1 x Зааварчилгааны гарын авлага (энэ баримт бичиг)

Тохиргоо

Before using your Cordless Smart Scissors, you will need to install the batteries.

1. Locate the battery compartment cover, usually on the handle.
2. Тасалгааг нээхийн тулд тагийг нь гулсуулж эсвэл тайл.
3. Insert the required batteries (e.g., 2 x AA batteries, not included) according to the polarity indicators (+/-).
4. Зайны тасалгааны тагийг сайтар хаа.
5. Ensure blades are securely attached. If replacing, refer to the "Maintenance" section.

Ашиглалтын заавар

Follow these steps for effective and safe operation:

1. Асаах: Locate the power switch or button, typically on the handle. Press or slide it to the "ON" position. The blades will begin to move.
2. Зүсэх: Position the material you wish to cut between the blades. Gently guide the scissors along the desired cutting line. The motorized blades will do the work.
3. Материалын нийцтэй байдал: These scissors are designed to cut various materials including fabric, paper, cardboard, and tough denim. Avoid extremely thick or rigid materials that may strain the motor or damage the blades.
4. Унтраах: After use, press or slide the power switch to the "OFF" position. Ensure the blades have stopped moving before setting the device down.

Засвар үйлчилгээ

Proper maintenance ensures the longevity and performance of your Cordless Smart Scissors.

Цэвэрлэгээ

• Always turn off the device and remove batteries before cleaning.
• Use a soft, dry cloth to wipe down the body of the scissors.
• Carefully remove any fabric fibers or debris from around the blades using a small brush or tweezers.
• Зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй, төхөөрөмжийг усанд дүрж болохгүй.

Ир солих

Dull blades can reduce cutting efficiency. Replace blades as needed using the included replacement set.

1. Ensure the device is turned off and batteries are removed.
2. Locate the blade release mechanism (refer to diagrams if available, or typically a small screw/latch).
3. Carefully remove the old blades, handling them by the non-sharp edges.
4. Insert the new blades, ensuring they are correctly aligned and secured.
5. Test the scissors on a scrap piece of material before resuming normal use.

Алдааг олж засварлах

If you encounter issues with your Cordless Smart Scissors, refer to the following common problems and solutions:

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SINGER webсайт. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.

Онлайн дэмжлэг: www.singer.com/support