Sanus SF26B1 26-inch Speaker Stands Instruction Manual

1. Танилцуулга

Thank you for choosing the Sanus SF26B1 26-inch Speaker Stands. These stands are designed to provide a stable and acoustically optimized platform for your medium-to-large bookshelf speakers, enhancing your audio experience. Constructed from heavy-gauge steel with an extra-large base, they offer superior stability and feature a concealed wire path for a clean setup. Please read this manual thoroughly before assembly and use to ensure proper installation and safe operation.

Figure 1: Sanus SF26B1 26-inch Speaker Stands, showcasing the black finish and sturdy design.

2. Аюулгүй байдлын мэдээлэл

Суурилуулалт болон ашиглалтын явцад дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг дагаж мөрдөнө үү.

• Do not exceed the maximum load capacity of 35 pounds (15.8 kg) per stand.
• Ensure all screws and fasteners are securely tightened before placing speakers on the stands.
• Place stands on a stable, level surface to prevent tipping.
• Жижиг эд анги, баглаа боодлын материалыг хүүхэд, тэжээвэр амьтнаас хол байлга.
• If using carpet spikes, exercise caution to avoid injury or damage to flooring.
• Consult a professional if you are unsure about any part of the assembly process.

3. Багцын агуулга

Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with installation and contact Sanus customer support.

• 2 x Heavy-Gauge Steel Base
• 2 x Twin Heavy-Gauge Steel Pillars
• 2 x 6 x 6.5 inch Top Plate
• 8 x Brass Studs (for speaker isolation)
• 8 x Neoprene Pads (for speaker isolation)
• 8 x Adjustable Carpet Spikes (optional)
• 8 x Rubber Feet (optional, for hard floors)
• Угсрах тоног төхөөрөмж (эрэг, угаагч, Аллен эрэг чангалах түлхүүр)
• Зааварчилгааны гарын авлага

4. Тохиргоо ба угсралт

Follow these steps to assemble your Sanus SF26B1 Speaker Stands:

1. Суурийг бэлтгэх: Decide whether to use the adjustable carpet spikes (for carpeted floors) or the rubber feet (for hard floors). Screw the chosen feet into the designated holes on the underside of each heavy-gauge steel base.
2. Attach Pillars to Base: Align the twin heavy-gauge steel pillars with the mounting holes on the top side of the base. Secure them using the provided screws and Allen wrench. Ensure they are tightened firmly for stability.
3. Route Speaker Wire (Optional): The pillars feature a concealed wire path. If desired, feed your speaker wire through the opening at the bottom of the pillar and guide it up through the top. This helps maintain a clean and organized appearance.
4. Дээд хавтанг хавсаргах: Secure the 6 x 6.5 inch top plate to the top of the pillars using the remaining screws.
5. Prepare Speaker Surface: Place either the brass studs or neoprene pads on the top plate where your speaker will rest. The brass studs provide acoustic isolation, while the neoprene pads offer grip and protection.
6. Албан тушаалын илтгэгчид: Carefully place your bookshelf speakers on the prepared top plates. Ensure they are centered and stable.

5. Үйл ажиллагаа ба байршуулалт

Proper placement of your speaker stands is crucial for optimal sound quality:

• Listening Height: Position the stands so that the tweeters of your speakers are at ear level when you are in your primary listening position. The 26-inch height of these stands is ideal for many seating arrangements.
• Өрөөний акустик: Experiment with the distance of the stands from walls and corners to find the best balance of bass response and soundstage.
• Тогтвортой байдал: Always ensure the stands are on a flat, stable surface. If using carpet spikes, adjust them to firmly penetrate the carpet for maximum stability. For hard floors, ensure rubber feet are evenly supporting the stand.
• Кабелийн менежмент: Utilize the concealed wire path within the pillars to keep speaker cables tidy and out of sight, reducing clutter and potential tripping hazards.

6. Засвар үйлчилгээ

To ensure the longevity and appearance of your speaker stands:

• Цэвэрлэгээ: Wipe the stands with a soft, dry cloth. For stubborn marks, a slightly damp Зөөлөн савантай даавуу хэрэглэж болох бөгөөд дараа нь шууд хатаана. Хүчтэй химийн бодис эсвэл зүлгүүрийн цэвэрлэгчээс зайлсхий.
• Бэхэлгээг шалгах: Periodically check all screws and connections to ensure they remain tight. Loose connections can affect stability and sound quality.
• Inspect Pads/Spikes: Ensure the speaker isolation pads or carpet spikes are in good condition and properly seated. Replace if worn or damaged.

7. Алдаа засах

If you encounter any issues with your speaker stands, refer to the following common solutions:

• Stands feel wobbly:
  • Бүх угсрах эрэг шургийг бүрэн чангалж байгаа эсэхийг шалгаарай.
  • Verify the stands are on a level surface. Adjust carpet spikes or rubber feet as needed.
  • Check that the speaker is centered on the top plate.
• Poor sound quality (e.g., muddy bass, vibrations):
  • Ensure speaker isolation pads or brass studs are correctly placed between the speaker and the top plate.
  • Check speaker cable connections for tightness and proper polarity.
  • Consider filling the hollow pillars with sand or shot for added mass and resonance damping, as described in the product features. This can significantly improve acoustic performance.
• Cables are not concealed properly:
  • Reroute cables through the internal path of the pillars, ensuring they are not pinched or twisted.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацааны мэдээлэл

For detailed warranty information regarding your Sanus SF26B1 Speaker Stands, please refer to the warranty card included with your product or visit the official Sanus webсайт. Баталгаат хугацаа, нөхцөл нь бүс нутаг болон жижиглэн худалдаалагчаас хамаарч өөр өөр байж болно.

10. Хэрэглэгчийн дэмжлэг

If you have any questions, require assistance with assembly, or need troubleshooting support, please contact Sanus customer service. Contact information can typically be found on the Sanus webсайт эсвэл таны бүтээгдэхүүний сав баглаа боодол дээр.

-д зочилно уу Sanus Store дэлгэрэнгүй мэдээлэл, бүтээгдэхүүн.