Dish Network 4.4 IR/UHF Pro Remote Model 176539 User Manual

Танилцуулга

This manual provides instructions for the Dish Network 4.4 IR/UHF Pro Remote, model 176539. This remote is designed to operate Dish Network receivers, including the model 322, and can also be programmed to control up to three additional devices such as televisions, DVD players, VCRs, or sound systems. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication modes.

This image displays the Dish Network 4.4 IR/UHF Pro Remote 322. The remote is black with various control buttons. Key features visible include the power button (orange), volume and channel controls (purple), a directional pad (purple), and number buttons (grey). The Dish Network logo is visible at the bottom right, along with a '2' indicating its function for a second TV.

Тохиргоо

1. Зай суурилуулах

The remote requires four (4) AAA batteries. To install:

1. Удирдлагын ар талд байгаа зайны тасалгааны тагийг олоорой.
2. Хавтасыг гулсуулж тайл.
3. Insert four AAA batteries, ensuring correct polarity (+ and -).
4. Зайны тасалгааны тагийг солих.

2. Programming for Dish Network Receiver

This remote can operate in either IR (Infrared) or UHF (Ultra High Frequency) mode. The mode is typically selected via a switch or tab within the battery compartment or on the remote itself. For model 322 receivers, the remote can function as a primary remote (TV1) or a secondary remote (TV2) using either IR or UHF.

• IR горим: Line-of-sight is required between the remote and the receiver.
• UHF Mode: Allows control without direct line-of-sight, useful for controlling receivers in another room or cabinet. The remote ships with a small UHF key for TV1.

Refer to your Dish Network receiver's manual for specific pairing instructions, as procedures may vary slightly by receiver model. Generally, this involves accessing a menu on your receiver to pair the remote.

3. Programming for Additional Devices (TV, DVD, VCR, Sound System)

The remote can be programmed to control up to four devices. To program for other devices:

1. Программ хийхийг хүсч буй төхөөрөмжөө (жишээлбэл, ТВ, DVD тоглуулагч) асаана уу.
2. Хүссэн төхөөрөмжийн товчийг дараад барина уу (жишээ нь, TV, DVD) on the remote until all device buttons light up, then release. The selected device button should remain lit.
3. Enter the 3-digit programming code for your device's brand. A list of common codes is usually provided with the remote or can be found on the Dish Network support webсайт.
4. Алсын удирдлагыг төхөөрөмж рүү чиглүүлж, товчийг дарна уу ХҮЧ товч. Хэрэв төхөөрөмж унтарвал код зөв байна.
5. If the device does not turn off, repeat steps 2-4 with the next code for your brand.
6. Once programmed, press the selected device button again to save the setting.

Алсын удирдлагатай ажиллах

The Dish Network 4.4 remote features a variety of buttons for controlling your entertainment system. Below are descriptions of common button functions:

• ХҮЧ: Сонгосон төхөөрөмжийг асаах эсвэл унтраана.
• ТВ/ВИДЕО: Switches video input on your television.
• ХААЛТ: Аудио чимээгүй болгодог.
• VOLUME +/-: Аудио дууны хэмжээг тохируулна.
• CHANNEL +/-: Сувгийг өөрчилдөг.
• УДИРДЛАГА: Програмын гарын авлагыг харуулна.
• МЭДЭЭЛЭЛ: Одоогийн програмын талаарх мэдээллийг харуулна.
• САНАХ: Өмнөх суваг руу буцна.
• SYS INFO: Accesses system information.
• DIRECTIONAL PAD (Arrows & SELECT): Цэс рүү шилжиж, сонголтуудыг сонгоно.
• Цуцлах: Exits menus or cancels actions.
• VIEW ТВ: Switches to live television.
• БИЧЛЭГ: Одоогийн програмын бичлэгийг эхлүүлнэ.
• DVR Controls (PLAY, PAUSE, STOP, FWD, REW, SKIP): Controls playback of recorded content.
• ДУГААР ТОВЧ (0-9): Directly enters channel numbers or menu selections.
• ХАЙХ: Accesses search functions.
• FORMAT: Changes video format or aspect ratio.

Засвар үйлчилгээ

Зай солих

Replace batteries when the remote's response becomes sluggish or the indicator light fails to illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.

Цэвэрлэгээ

To clean the remote, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's electronics or finish.

Алдааг олж засварлах

• Алсын удирдлага хариу өгөхгүй байна:
  • Батерейны суурилуулалтыг шалгаж, батерей нь шинэ эсэхийг шалгаарай.
  • Ensure there are no obstructions between the remote and the receiver/device if using IR mode.
  • Verify the remote is set to the correct device mode (e.g., SAT for the receiver, TV for the television).
• Тодорхой товчлуурууд ажиллахгүй байна:
  • This may indicate a worn-out button or internal issue. Try replacing batteries first.
  • If the remote is programmed for multiple devices, ensure the correct device button is selected for the function you are attempting.
• Programming issues for other devices:
  • Double-check the programming codes for your device brand.
  • Ensure the device is on and the remote is pointed directly at it during programming.
  • Some older or newer devices may not be compatible with the remote's pre-programmed codes.
• UHF mode not working:
  • Ensure the remote's UHF switch/tab is correctly set.
  • Verify the receiver is configured for UHF remote control and is properly paired.

Үзүүлэлтүүд

• Загварын дугаар: 176539
• Бүтээгдэхүүний хэмжээ: 8 x 1 x 3 инч
• Барааны жин: 3.52 унц
• Батерей: 4 AAA батерей шаардлагатай
• Дэмжигдсэн төхөөрөмжүүдийн хамгийн их тоо: 4
• Тохиромжтой төхөөрөмжүүд: Dish Network Satellite Receivers (e.g., Model 322), TV, DVD, VCR, Sound Systems
• Харилцааны төрөл: IR (Infrared) and UHF (Ultra High Frequency)
• Өнгө: Хар

Баталгаат болон дэмжлэг

For specific warranty information or technical support, please contact Dish Network directly. Their official website or customer service channels can provide the most accurate and up-to-date assistance regarding your remote control and receiver.