Showtec LED Par 64 Богино Q4-18 Хар хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Аюулгүй байдлын мэдээлэл

Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:

• Ensure the device is connected to a grounded power outlet with the correct voltage (2.4E+2 Volts AC).
• Төхөөрөмжийг бороо, чийгэнд бүү тавь.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд хангалттай агааржуулалтыг хангана.
• Нүдний гэрлийн эх үүсвэрт шууд өртөхөөс зайлсхий.
• Цэвэрлэх эсвэл засвар үйлчилгээ хийхээсээ өмнө үргэлж цахилгаан тэжээлийг салга.
• Төхөөрөмжийг болгоомжтой харьц. Унах, хүчтэй нөлөө үзүүлэхээс зайлсхий.

3. Бүтээгдэхүүн дууссанview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key viewбүтээгдэхүүний s:

Зураг 3.1: Урд view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Тохиргоо

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Суурилуулалт: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Эрчим хүчний холболт: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX холболт (заавал биш): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Анхны асаалт: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Ажиллаж байгаа

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Хяналтын самбар дээрview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• Горим: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Тохиргоо: Enters/confirms settings within a selected mode.
• Дээшээ: Цэсний сонголтуудаар дээшээ шилжих эсвэл параметрийн утгыг нэмэгдүүлдэг.
• Доош: Цэсний сонголтуудаар доош шилжих эсвэл параметрийн утгыг бууруулдаг.

5.2 DMX хяналт

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Standalone Modes

Use the 'Mode' button to select standalone programs. These may include:

• Автомат програмууд: Pre-programmed light shows that run automatically.
• Дуу идэвхтэй: The light reacts to ambient sound via a built-in microphone.
• Статик өнгө: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Цэвэрлэгээ: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp даавуу хэрэглэж болно. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй.
• Линз цэвэрлэх: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Гал хамгаалагч солих: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• Шалгалт: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Алдаа засах

Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webсайт. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.

Үйлдвэрлэгч: Showtec

Webсайт: www.highlite.com/en/brands/showtec