PROXXON Table Saw FET Model 37070 Instruction Manual

1. Танилцуулга

This manual provides essential information for the safe and effective operation, setup, and maintenance of your PROXXON Table Saw FET Model 37070. Please read all instructions carefully before using the tool to ensure proper function and to prevent injury.

Figure 1: PROXXON Table Saw FET Model 37070

The PROXXON Table Saw FET is designed for precision cutting of various materials including wood, non-ferrous metals, plastics, Plexiglas, fiberglass-reinforced sheets, and foam. Its features include an adjustable blade, an extendable table, and a low-noise motor, making it suitable for intricate projects.

2. Аюулгүй ажиллагааны заавар

Цахилгаан хэрэгсэлтэй ажиллахдаа гал түймэр, цахилгаан цочрол, бие махбодид гэмтэл учруулах эрсдлийг бууруулахын тулд аюулгүй байдлын үндсэн арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Гарын авлагыг бүхэлд нь уншина уу: Understand all operating procedures and warnings before use.
• Нүдний хамгаалалт зүүх: Нисдэг хог хаягдлаас хамгаалахын тулд хамгаалалтын шил эсвэл нүдний шил зүүж байгаарай.
• Use Hearing Protection: Wear ear protection during operation to prevent hearing damage.
• Ажлын талбайг цэвэр байлгах: Замбараагүй газар осол аваар гарахыг урьж байна. Тохиромжтой гэрэлтүүлгийг хангах.
• Аюултай орчноос зайлсхий: d-д цахилгаан хэрэгсэл бүү ашиглаamp эсвэл нойтон газар, эсвэл бороонд оруулаарай. Ажлын байрыг гэрэлтүүлэгтэй байлгах.
• Хүүхдийг хол байлгах: Бүх зочдыг ажлын талбайгаас аюулгүй зайд байлгах хэрэгтэй.
• Аюулгүй ажлын хэсэг: Үргэлж clamp or secure the workpiece to prevent movement during cutting.
• Use Proper Blade: Ensure the correct blade type and size are installed for the material being cut.
• Цахилгааныг салгах: Always disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.
• Арчилгааны хэрэгслүүд: Илүү сайн, аюулгүй ажиллахын тулд багаж хэрэгслийг хурц, цэвэрхэн байлга. Дагалдах хэрэгслийг тослох, солих зааварчилгааг дагана уу.
• Avoid Forcing Tool: The tool will do the job better and more safely at the rate for which it was designed.
• Never Reach Over Blade: Keep hands clear of the blade path at all times. Use a push stick when necessary.

3. Багцын агуулга

The PROXXON Table Saw FET Model 37070 package typically includes the following items:

• PROXXON Table Saw FET unit
• Tungsten-tipped saw blade (80mm diameter, 36 teeth)
• Longitudinal stop (fence) with micro-adjustment screw
• Angle stop with rail
• Workpiece pusher
• Non-slotted ABS sawing gap cover
• Тоос сорогч адаптер

Figure 2: Product packaging and included components

4. Тохиргоо ба угсралт

Follow these steps to set up your table saw for initial use.

4.1 Attaching the Longitudinal Stop (Fence)

1. Slide the longitudinal stop onto the guide rail at the front of the table.
2. Position the stop to the desired measurement.
3. Secure the stop using the locking mechanism. For fine adjustments, use the integrated adjusting screw. Each turn of the screw allows for precise corrections, even as small as 0.004 inches (0.1mm).

4.2 Хөрөөний ирийг суурилуулах

The saw comes with a tungsten-tipped blade installed. If you need to change or install a blade:

1. Цахилгааныг салгах: Хөрөөг цахилгааны залгуураас салгасан эсэхийг шалгаарай.
2. Remove Table Insert: Carefully remove the table insert covering the blade area.
3. Арборын самарыг суллах: Use the provided wrench to loosen the arbor nut holding the blade.
4. Replace Blade: Remove the old blade and install the new blade, ensuring the teeth are oriented correctly for cutting. The saw supports blades with a diameter between 2 and 3 11/32 inches (50-85mm) and a 13/32 inch (10mm) center hole.
5. Tighten Arbor Nut: Securely tighten the arbor nut.
6. Reinstall Table Insert: Place the table insert back into position.

Figure 3: Tungsten-tipped saw blade for precision cutting

4.3 Цахилгаан тэжээлд холбогдох

Connect the saw's power cord to a standard 110-120V AC, 60Hz electrical outlet.

5. Ашиглалтын заавар

Understand the various adjustments and techniques for effective cutting.

5.1 Ирний өндөр ба өнцгийг тохируулах

The saw blade's height and angle are adjustable to accommodate different material thicknesses and cut types.

• Хутганы өндөр: Use the adjustment knob located on the front of the saw to raise or lower the blade. The cutting depth ranges from 0.04 to 5/6 inches (1 to 22mm).
• Blade Angle (Miter Cuts): The blade can be tilted up to 45 degrees for miter cuts. Use the angle adjustment lever and scale to set the desired angle.

Figure 4: Blade angle adjustment mechanism

5.2 Making Straight Cuts (Ripping)

1. Set the blade height slightly above the workpiece thickness.
2. Adjust the longitudinal stop (fence) to the desired cutting width. Use the micro-adjustment screw for fine tuning.
3. Place the workpiece against the fence and firmly on the table.
4. Хөрөө асаана уу.
5. Slowly and steadily feed the workpiece into the blade, keeping it pressed against the fence. Use the workpiece pusher for safety, especially with smaller pieces.

Figure 5: Performing a straight cut with the longitudinal stop

5.3 Making Miter Cuts

1. Set the blade height appropriately.
2. Adjust the blade angle to the desired miter angle (up to 45 degrees).
3. Alternatively, use the angle stop with its rail, which slides in the milled slot on the table top. Set the angle stop to the required angle.
4. Place the workpiece against the angle stop and firmly on the table.
5. Turn on the saw and feed the workpiece through the blade.
6. Double miter cuts are possible by combining blade tilt and angle stop adjustments.

5.4 Сунгах боломжтой хүснэгтийг ашиглах нь

The saw features an extendable table extension with an integrated auxiliary stop, useful for supporting larger workpieces and ensuring accurate cuts.

5.5 Vacuum Adapter

Attach a vacuum cleaner to the integrated adapter to maintain a clean work area and reduce dust exposure during operation.

6. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны ширээний хөрөөний урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.

6.1 Ир солих

Refer to Section 4.2 for detailed instructions on how to safely replace the saw blade.

6.2 Цэвэрлэгээ

• Цахилгааныг салгах: Цэвэрлэхийн өмнө хөрөөг үргэлж салга.
• Тоос, хог хаягдлыг арилгах: Use a brush or vacuum cleaner to remove sawdust and debris from the table, blade guard, and motor vents.
• Clean Table Surface: Wipe the table surface with a clean, dry cloth.
• Бүрэлдэхүүн хэсгүүдийг шалгах: Periodically inspect all moving parts, fasteners, and electrical cords for wear or damage.

7. Алдаа засах

This section addresses common issues you might encounter with your PROXXON Table Saw FET.

• Saw Not Starting:
  • Цахилгааны утсыг ажиллагаатай залгуурт найдвартай залгасан эсэхийг шалгана уу.
  • Цахилгаан унтраалга 'ON' байрлалд байгаа эсэхийг шалгаарай.
  • Хэлхээ таслагч унтараагүй эсэхийг шалгана уу.
• Буруу зүсэлт:
  • Ensure the longitudinal stop (fence) is securely locked and parallel to the blade. Use the micro-adjustment for precise alignment.
  • Check that the blade is clean, sharp, and correctly installed.
  • Verify that the workpiece is held firmly against the fence and table during the cut.
  • For miter cuts, ensure the angle stop or blade tilt is set accurately and secured.
• Хэт их чичиргээ эсвэл дуу чимээ:
  • Check if the saw blade is properly tightened and not damaged.
  • Ensure the saw is placed on a stable, level surface.
  • Inspect for any loose components or debris inside the saw housing.
• Blade Binding or Slow Cutting:
  • The blade may be dull and require sharpening or replacement.
  • Ensure the correct blade type is used for the material.
  • Avoid forcing the workpiece; feed it at a consistent, appropriate speed.
  • Check for proper blade alignment and fence parallelism.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

9.1 Хязгаарлагдмал баталгаат хугацаа

PROXXON Inc. warrants to the original purchaser that all PROXXON consumer power tools will be free from defects in material or workmanship for a period of худалдан авсан өдрөөс хойш хоёр жил. This warranty covers repair or replacement of defective parts, provided the tool has not been misused, carelessly handled, or improperly repaired by unauthorized personnel.

This limited warranty does not apply to tools used for commercial manufacturing and construction applications, nor does it cover accessory items such as circular saw blades, drill bits, router bits, jigsaw blades, sanding belts, grinding wheels, and other related accessories. Damage resulting from tampering, accident, abuse, negligence, unauthorized repairs or alterations, unapproved attachments, or other causes unrelated to material or workmanship are not covered.

Any implied warranties are limited in duration to two years from the date of purchase. In no event shall PROXXON Inc. be liable for any incidental or consequential damages arising from the sale or use of this product.

All warranty claims must be accompanied by a copy of the packing slip, invoice, or other proof of purchase.

9.2 Хэрэглэгчийн дэмжлэг

For technical assistance, parts, or warranty inquiries, please contact PROXXON customer support. Refer to the product packaging or the official PROXXON webодоогийн холбоо барих мэдээллийг авах сайт.