Gibson Performance Exhaust 18808 хөнгөн цагаанаар бүрсэн хос арын яндангийн системийн хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your Gibson Performance Exhaust 18808 Aluminized Dual Rear Exhaust System. This system is designed to replace the factory exhaust, offering a bolt-on solution without requiring welding.

The Gibson 18808 system features aluminized, 2.5-inch mandrel-bent heavy-duty tubing, a Superflow performance muffler, and 3.5-inch polished T304 stainless steel round slash-cut tips. The exhaust exit is straight out the back of the vehicle.

Зураг 1.1: Дууслааview of the Gibson Performance Exhaust 18808 system components, including muffler, piping, and dual tips.

2. Аюулгүй байдлын мэдээлэл

Always prioritize safety during installation and operation. Wear appropriate personal protective equipment, such as safety glasses and gloves. Ensure the vehicle is securely supported on jack stands or a lift before working underneath it. Allow the exhaust system to cool completely before handling to prevent burns.

КАЛИФОРНИЙ АНХААРУУЛГА: Энэ бүтээгдэхүүн нь Калифорни мужид хорт хавдар, ургийн гажиг эсвэл нөхөн үржихүйн бусад хор хөнөөл учруулдаг хар тугалга зэрэг химийн бодисуудад өртөж болзошгүй. Дэлгэрэнгүй мэдээллийг эндээс авна уу www.P65Warnings.ca.gov.

3. Тохиргоо ба суурилуулалт

The Gibson 18808 exhaust system is designed for hassle-free bolt-on installation. No welding is required. It includes zinc-plated factory-style hangers, clamps, and all necessary hardware.

3.1. Шаардлагатай хэрэгслүүд

• Сокет/Түлхүүрийн багц
• При бар
• Penetrating Lubricant
• Хамгаалалтын шил
• Бээлий
• Vehicle Lift or Jack Stands

3.2. Суулгах алхамууд

1. Тээврийн хэрэгслийг бэлтгэх: Park the vehicle on a level surface. Engage the parking brake. Allow the exhaust system to cool completely. Lift the vehicle using a hoist or securely place it on jack stands.
2. Remove Factory Exhaust:
   • Locate and loosen all clamps and bolts securing the factory exhaust system.
   • Use penetrating lubricant on rusted fasteners if necessary.
   • Carefully remove the factory exhaust system from the hangers. It may be necessary to cut the exhaust in sections for easier removal, depending on the vehicle model.
3. Install New System Components:
   • Refer to the diagram (Image 3.1) for component placement.
   • Begin by installing the head pipe, connecting it to the catalytic converter. Do not fully tighten bolts yet.
   • Attach the muffler assembly to the head pipe.
   • Install the two tailpipes and then the two exit pipes, ensuring they align correctly with the vehicle's undercarriage and hangers.
   • Attach the 3.5-inch polished T304 stainless steel round slash-cut tips to the exit pipes.
   • Ensure all components are properly seated in the factory-style hangers.
4. тэгшлэх ба чангалах:
   • Once all components are loosely installed, adjust the system for optimal alignment and clearance from the vehicle's frame, suspension, and body.
   • Ensure the exhaust tips are positioned as desired, exiting straight out the back.
   • Starting from the front of the vehicle, progressively tighten all clamps ба боолт.
5. Эцсийн шалгалт: Lower the vehicle. Start the engine and check for any exhaust leaks. Listen for any rattles or vibrations. Adjust as necessary.

Image 3.1: Schematic diagram illustrating the general layout of the exhaust system components from the catalytic converter to the dual tips.

Image 3.2: The Gibson 18808 exhaust system installed on a vehicle, showcasing the dual rear exit and polished tips.

4. Operation and Performance Characteristics

The Gibson 18808 system is designed to deliver a powerful "big block" sound. Users can expect a noticeable change in exhaust tone compared to the factory system. The Superflow performance muffler is engineered to decrease backpressure, which can result in increased torque and horsepower.

Performance characteristics may vary based on vehicle make, model, engine type, and other modifications.

5. Засвар үйлчилгээ

The Gibson Performance Exhaust system is constructed from durable aluminized steel and T304 stainless steel tips, designed for longevity. Regular maintenance is minimal but recommended:

• Тогтмол үзлэг: Annually inspect all clamps, hangers, and connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.
• Цэвэрлэгээ: The polished stainless steel tips can be cleaned with a non-abrasive metal polish to maintain their luster.
• Зэврэлтийг шалгах: While aluminized steel offers good corrosion resistance, inspect the system periodically for any signs of rust, especially in areas exposed to road salt or harsh weather conditions.

6. Алдаа засах

Суулгасны дараа танд асуудал тулгарвал дараахь зүйлийг анхаарч үзээрэй.

• Чичиргээ эсвэл чичиргээ:
  • Ensure all hangers are properly seated and not touching the vehicle's frame or body.
  • Check for adequate clearance between the exhaust pipes and other vehicle components. Adjust alignment if necessary.
  • Бүгдийг шалгана ууamps and bolts are securely tightened.
• Яндангийн алдагдал:
  • Inspect all connection points for leaks. A common method is to feel for escaping air or listen for a hissing sound.
  • Cl эсэхийг шалгаарайamps are tight and properly positioned over pipe joints.
• Тохируулгын асуудлууд:
  • Some aftermarket components (e.g., tow hitches) may interfere with exhaust routing. Verify compatibility before installation.
  • If pipes appear ovalized or difficult to fit, minor reshaping may be required.

If problems persist, consult a professional automotive technician or contact Gibson Performance Exhaust customer support.

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацааны мэдээлэл

The Gibson Performance Exhaust 18808 Aluminized Dual Rear Exhaust System is backed by a Насан туршийн хязгаарлагдмал баталгаа. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official Gibson Performance Exhaust warranty documentation or contact their customer support.

9. Дэмжлэг

For further assistance, technical support, or warranty inquiries regarding your Gibson Performance Exhaust system, please contact Gibson Performance Exhaust directly. Contact information can typically be found on their official webсайт эсвэл бүтээгдэхүүний сав баглаа боодол.

Manufacturer: Gibson Performance Exhaust