1. Бүтээгдэхүүн дууссанview
The Gerber Danze DA507348N is a ceramic disc cartridge designed as a replacement part for various Danze single-handle faucets. This component is crucial for controlling water flow and temperature in compatible faucet models, restoring proper function and preventing leaks.

Image 1: The Gerber Danze DA507348N Ceramic Disc Cartridge. This image displays the blue and white ceramic disc cartridge with its stem, ready for installation into a compatible single-handle faucet.
2. Техникийн үзүүлэлтүүд
- Загварын дугаар: DA507348N
- Төрөл: Керамик дискний хайрцаг
- Тохиромжтой байдал: Designed for Danze single-handle faucets
- Материал: Керамик, Хуванцар
- Хэмжээ: Ойролцоогоор 2.25 x 1.25 x 1.25 инч
- Барааны жин: Ойролцоогоор 1.45 унц
- Орлуулна: Danze model DA507048N
3. Compatible Faucet Models
This ceramic disc cartridge is compatible with the following Danze single-handle faucet models:
- D153244, D155040, D201014, D201244, D203112
- D215158, D216454, D216540, D220111, D221040
- D222158, D223140, D223544, D403412, D403512
- D403612, D403712, D403812, D404214, D404444
- D404458, D404854, D405040, D455612, D457015
It also serves as a replacement for the older Danze model DA507048N.
4. Суурилуулах заавар
Follow these steps to replace the ceramic disc cartridge in your Danze single-handle faucet. It is recommended to consult your specific faucet's manual for detailed disassembly instructions, as designs may vary.
4.1. Эхлэхээсээ өмнө
- Усан хангамжийг унтраах: Locate the hot and cold water shut-off valves under the sink and turn them clockwise until fully closed. Open the faucet handle to relieve any remaining water pressure.
- Цуглуулах хэрэгсэл: You may need a flathead screwdriver, Phillips head screwdriver, Allen (hex) wrench (often 2.5mm), channel lock pliers, and plumber's grease.
4.2. Removing the Old Cartridge
- Цоргоны бариулыг арилгах: Typically, there is a small decorative cap or plug on the handle that conceals a set screw. Carefully pry off the cap and use the appropriate screwdriver or Allen wrench to loosen the set screw. Once loose, pull the handle straight up and off.
- Access the Cartridge: Remove any decorative trim rings or covers to expose the cartridge housing.
- Remove Locking Collar/Nut: The cartridge is usually secured by a threaded collar or nut. This may require channel lock pliers. Turn it counter-clockwise to loosen and remove. Be careful not to damage the threads.
- Extract Old Cartridge: Carefully pull the old cartridge straight out. Note its orientation for reference.
- O-цагирагуудыг шалгах: Ensure that all old O-rings (often three connected in a 'Mickey Mouse ears' shape) are removed from the faucet body. If they remain, the new cartridge will not fit correctly. Clean any grit or mineral buildup from the cartridge housing.
4.3. Installing the New Cartridge
- Тослох (заавал биш): Apply a small amount of plumber's grease to the O-rings on the new cartridge for easier installation and better sealing.
- Шинэ хайрцаг оруулах: Align the new DA507348N cartridge with the faucet body, ensuring it is seated correctly. Push it firmly into place.
- Secure Locking Collar/Nut: Reinstall the locking collar or nut, turning it clockwise to tighten. Do not overtighten, but ensure it is snug.
- Краныг дахин угсрах: Replace any decorative trim rings and then the faucet handle. Tighten the set screw to secure the handle.
- Усан хангамжийг сэргээх: Slowly turn the hot and cold water shut-off valves back on.
- Туршилтын цорго: Check for leaks and verify proper water flow and temperature control.

Image 2: Genuine Gerber Replacement Parts. This logo signifies the authenticity and quality of Gerber replacement components, ensuring optimal product performance.
5. Засвар үйлчилгээ
Proper maintenance can extend the life of your faucet and cartridge.
- Тогтмол цэвэрлэгээ: Periodically clean faucet components, including the cartridge housing, to prevent mineral buildup. Products like CLR (Calcium, Lime, Rust remover) can be used for this purpose.
- Тосолгоо: If the handle operation becomes stiff, disassemble the handle and cartridge, clean the components, and apply fresh plumber's grease to the O-rings and moving parts of the cartridge.
- Өвөлжилт: In outdoor faucet applications, ensure the water supply is completely shut off and the faucet is drained during winter months to prevent O-ring damage from freezing.
6. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Faucet Leaks After Cartridge Replacement |
|
|
| No Hot Water (or inconsistent temperature) |
|
|
| Stiff Faucet Handle Operation |
|
|
7. Баталгаат хугацааны мэдээлэл
Gerber products, including this ceramic disc cartridge, are typically backed by a limited lifetime warranty against manufacturing defects. For specific terms and conditions, please refer to the warranty documentation provided with your original Danze faucet or contact Gerber customer support.
8. Хэрэглэгчийн дэмжлэг
For technical assistance, installation questions, or warranty claims, please contact Gerber customer support. Contact information can typically be found on the official Gerber webсайт эсвэл таны бүтээгдэхүүнд хавсаргасан баримт бичигт.
You can also visit the official Gerber webдэлгэрэнгүй мэдээллийг сайтаас авна уу: Gerber Store on Amazon





