Velleman VM130T

Velleman VM130T 2 сувгийн алсын удирдлагатай дамжуулагч модулийн хэрэглэгчийн гарын авлага

Model: VM130T

1. Танилцуулга

This manual provides essential information for the proper installation, operation, and maintenance of your Velleman VM130T 2-Channel Remote Control Transmitter Module. Please read these instructions carefully before using the device to ensure optimal performance and safety.

2. Бүтээгдэхүүн дууссанview

The Velleman VM130T is a compact, 2-channel handheld radio frequency (RF) remote control transmitter module designed for use with compatible Velleman RF receivers (e.g., K8057, VM109, VM130 receiver units). It features two distinct buttons for controlling two separate channels or functions, making it suitable for various remote control applications such as garage door openers, alarm systems, or lighting control.

Velleman VM130T 2-Channel Remote Control Transmitter Module

Figure 1: Velleman VM130T 2-Channel Remote Control Transmitter Module. This image displays the black, ergonomic remote control with two oval buttons and a small red indicator light, attached to a metal keyring.

3. Техникийн үзүүлэлтүүд

Загварын дугаар:VM130T
Брэнд:Веллеман
Холболтын технологи:Радио давтамж (RF)
Товчлуурын тоо:2
Хянагчийн төрөл:Товчлуурын удирдлага
Эрчим хүчний хангамж:12V Battery (Alkaline, included)
Хамгийн их хүрээ:10 метр (ойролцоогоор 33 фут)
Хэмжээ (L x W x H):2.5 x 12.1 x 20 см (ойролцоогоор 63 x 40 x 16 мм)
Жин:60 гр
Өнгө:Хар
GTIN:05410329394479

4. Тохиргоо

4.1. Зай суурилуулах

The VM130T transmitter comes with a 12V alkaline battery pre-installed. If the battery needs replacement:

  1. Болгоомжтой нээх casing of the remote control. The casing is typically clipped together.
  2. Хуучин 12V батерейг салга.
  3. Insert a new 12V alkaline battery, ensuring correct polarity (+ and -).
  4. c-г хаахasing найдвартай.

4.2. Хүлээн авагчтай хослуулах

The VM130T is a transmitter module and requires a compatible Velleman RF receiver (e.g., K8057, VM109, VM130 receiver units) to function. The pairing procedure is specific to the receiver unit. Please refer to the instruction manual of your Velleman RF receiver for detailed steps on how to pair the VM130T transmitter with your receiver.

5. Ашиглалтын заавар

Once the VM130T transmitter is successfully paired with your Velleman RF receiver, operation is straightforward:

6. Засвар үйлчилгээ

6.1. Зай солих

Replace the 12V alkaline battery when the transmission range decreases significantly or the indicator light fails to illuminate upon button press. Refer to section 4.1 for battery installation instructions.

6.2. Цэвэрлэгээ

Clean the exterior of the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing. Avoid exposing the device to excessive moisture.

6.3. Хадгалах

Store the remote control in a dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

7. Алдаа засах

АсуудалБоломжит шалтгаанШийдэл
Дамжуулагч хариу өгөхгүй байна.Батарей цэнэггүй эсвэл бага.Replace the 12V battery (see section 4.1).
Үйл ажиллагааны хүрээг багасгасан.Low battery, environmental interference, or obstacles.Replace battery. Ensure clear line of sight if possible. Minimize interference from other RF devices.
Receiver does not react to transmitter.Transmitter not paired with receiver, or receiver malfunction.Verify pairing according to your receiver's manual. Check receiver's power supply and functionality.

8. Баталгаат хугацаа ба дэмжлэг

Баталгаат хугацааны мэдээлэл болон техникийн дэмжлэг авахыг хүсвэл худалдан авалттайгаа хамт ирсэн баримт бичгийг үзэх эсвэл Velleman хэрэглэгчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат хугацааны нэхэмжлэл гаргахын тулд худалдан авалтын баримтаа хадгална уу.

Үйлдвэрлэгч: VS Electronic Vertriebs GmbH