Танилцуулга
This manual provides comprehensive instructions for the Dish Network 3.4 and 4.4 Remote Set. This set includes a 3.4 IR 1 remote with a green color-coded ID pad and a 4.4 IR/UHF 2 remote with a blue color-coded ID pad. These remotes serve as an upgrade and direct replacement for the original remotes used with the Dish Network 322 receiver model.
The remotes are pre-programmed and designed for ease of use, offering both Infrared (IR) and Ultra High Frequency (UHF) capabilities for versatile control of your Dish Network receiver and compatible devices.
Бүтээгдэхүүн дууссанview
Image: The Dish Network 3.4 (left, green ID pad) and 4.4 (right, blue ID pad) remote controls. Both remotes feature a black body with purple and red buttons, including a directional pad, number keys, and various function buttons for TV and receiver control.
The Dish Network 3.4 remote is primarily an Infrared (IR) remote, identified by its green color-coded ID pad. The Dish Network 4.4 remote offers both Infrared (IR) and Ultra High Frequency (UHF) capabilities, distinguished by its blue color-coded ID pad. Both remotes are designed to provide seamless control over your Dish Network 322 receiver.
Тохиргоо
1. Зай суурилуулах
The remotes require batteries for operation. Although batteries are not included with the set, the remotes are designed to use standard Lithium batteries. To install:
- Удирдлагын ар талд байгаа зайны тасалгааны тагийг олоорой.
- Тасалгааг нээхийн тулд тагийг нь гулсуулж эсвэл өргөж ав.
- Шаардлагатай батерейг дотор нь заасанчлан зөв туйлшралыг (+ ба -) хангаж, шаардлагатай батерейг оруулна уу.
- Зайны тасалгааны тагийг найдвартай солино.
2. Initial Programming / Pairing
These remotes are pre-programmed for the Dish Network 322 receiver. For most users, they will work immediately upon battery installation. However, if you experience issues or wish to pair them with a different device or for UHF functionality (4.4 remote only), follow these general steps:
- For IR Control: Ensure a clear line of sight between the remote's IR emitter and the receiver's IR sensor. The 3.4 remote operates solely via IR.
- For UHF Control (4.4 Remote Only): The 4.4 remote supports UHF, allowing control without direct line of sight. Refer to your Dish Network receiver's manual for specific UHF pairing instructions, as this process typically involves a menu option on the receiver itself.
- Programming for TV/VCR: To control your television or VCR, you may need to program the remote using specific codes. Consult the original Dish Network remote programming guide or the Dish Network website for a list of codes and programming steps. The remotes are compatible with VCRs.
Ашиглалтын заавар
The Dish Network 3.4 and 4.4 remotes feature a standard layout for intuitive control of your receiver and connected devices. Key functions include:
- Цахилгаан товч: Turns the receiver and/or TV on/off.
- Дууны хэмжээг нэмэгдүүлэх/доошруулах: Аудио дууны хэмжээг тохируулна.
- Суваг дээш/доошоо: Сувгийг өөрчилдөг.
- Тооны самбар (0-9): Шууд суваг оруулах.
- Хөтөч: Програмын гарын авлагыг харуулна.
- Сонгох/Зөвшөөрөх: Цэснүүд дэх сонголтыг баталгаажуулна.
- Навигацийн сум: Цэс болон сонголтоор шилжинэ үү.
- Дууг хаах: Аудио чимээгүй болгодог.
- Санах: Өмнөх суваг руу буцна.
- Мэдээлэл: Програмын мэдээллийг харуулна.
- Бичлэг: Initiates recording (if receiver supports DVR).
- View ТВ: Switches between TV and other inputs.
- Системийн мэдээлэл: Accesses system information.
For detailed functionality of specific buttons, refer to your Dish Network receiver's user manual.
Засвар үйлчилгээ
Зай солих
When the remote's performance degrades (e.g., reduced range, unresponsive buttons), it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace all batteries at the same time with new ones of the same type.
Цэвэрлэгээ
To clean the remote, use a soft, dry cloth. For stubborn dirt, slightly dampАлсын удирдлагын электроник эсвэл өнгөлгөөг гэмтээж болзошгүй тул даавууг ус эсвэл зөөлөн, үрэлтгүй цэвэрлэгчээр арчина. Хүчтэй химийн бодис эсвэл хэт их чийг хэрэглэхээс зайлсхий.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Алсын удирдлага хариу өгөхгүй байна. | Дууссан эсвэл буруу суурилуулсан батерей. | Батерейг солих, зөв туйлшралыг хангах. |
| Remote has limited range (IR). | Obstruction between remote and receiver; weak batteries. | Ensure clear line of sight. Replace batteries. |
| Remote not controlling TV/VCR. | Remote not programmed for the device. | Program the remote using the appropriate codes for your TV/VCR. Refer to Dish Network's programming guide. |
| 4.4 remote not working via UHF. | Not properly paired with receiver for UHF. | Follow UHF pairing instructions in your Dish Network receiver's manual. |
Үзүүлэлтүүд
- Брэнд: Таваг
- Загвар: 3.4 ба 4.4
- Хэсгийн дугаар: 155153-3.4 (for 3.4 remote), 155154-4.4 (for 4.4 remote)
- Тохиромжтой төхөөрөмжүүд: Dish Network 322 Receiver, VCR
- Онцлог шинж чанарууд: Infrared (IR), Pre-Programmed, Ultra High Frequency (UHF) for 4.4 remote
- Зайны төрөл: Лити (оруулаагүй)
- Холболтын технологи: Infrared, UHF (for 4.4 remote)
- Бүтээгдэхүүний хэмжээ: Ойролцоогоор 19.3 x 7.11 x 5.59 см
- Барааны жин: Ойролцоогоор 91 гр
- Өнгө: Blue (4.4 remote ID pad), Green (3.4 remote ID pad)
Баталгаат болон дэмжлэг
This product is designed as a direct replacement for Dish Network 322 receiver remotes. For specific warranty information, please refer to the retailer or original manufacturer's documentation provided at the time of purchase.
For technical support, programming assistance, or further inquiries regarding your Dish Network receiver and compatible remotes, it is recommended to contact Dish Network customer service directly or visit their official support website. They can provide the most accurate and up-to-date information for your specific setup.
Note: This manual provides general guidance. Specific features and programming steps may vary based on your Dish Network receiver model and software version.
