1. Танилцуулга
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Telwin BIMAX 162 TURBO 230V continuous wire welding machine. This machine is designed for FLUX (no gas) and MIG-MAG (gas) welding, and is also equipped for spot welding. Please read this manual thoroughly before using the equipment.
2. Аюулгүй ажиллагааны заавар
WARNING: Welding operations can be dangerous. Always follow safety precautions to prevent injury or damage.
- Цахилгаан цохих: Always ensure the machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves.
- Утаа ба хий: Welding produces fumes and gases that can be hazardous to health. Work in a well-ventilated area or use a fume extractor.
- Нуман туяа: Arc rays can burn eyes and skin. Always wear a welding helmet with appropriate filter lenses and protective clothing.
- Гал ба дэлбэрэлт: Гагнуурын оч, халуун металл нь гал түймэр үүсгэдэг. Шатамхай материалыг гагнуурын талбайгаас хол байлга.
- Түлэнхий: Халуун металл, тоног төхөөрөмж нь хүнд түлэгдэлт үүсгэдэг. Хамгаалалтын бээлий, хувцас өмс.
- Хөдөлгөөнт хэсгүүд: Keep hands and body clear of moving parts like wire feed rollers.
Засвар үйлчилгээ эсвэл тохируулга хийхээсээ өмнө цахилгаан тэжээлийг үргэлж салгаж байгаарай.
3. Бүтээгдэхүүн дууссанview
The Telwin BIMAX 162 TURBO is a versatile continuous wire welding machine designed for various welding tasks. Key features include:
- Multi-process Capability: Supports FLUX (no gas) and MIG-MAG (with gas) welding.
- Spot Welding Function: Equipped for spot welding with electronic time regulation.
- Integrated Fan: Ensures efficient cooling during operation.
- Thermostatic Protection: Automatically shuts down the machine to prevent overheating.
- Зөөврийн чадвар: Mounted on wheels for easy movement within the workspace.
- Дагалдах хэрэгсэл: Supplied with FLUX welding accessories.
Image 1: Telwin BIMAX 162 TURBO 230V Welding Machine. This image shows the overall design of the welding machine, highlighting its compact structure and integrated wheels for mobility.
4. Тохиргоо
- Савлах, шалгах: Carefully remove the welding machine from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
- Байршил: Position the machine on a stable, level surface, ensuring adequate ventilation around the unit. The machine is equipped with wheels for easy relocation.
- Эрчим хүчний холболт: Connect the machine to a 230 V, 50/60 Hz single-phase power supply. Ensure the power outlet is properly grounded and capable of handling the machine's maximum power draw (up to 3.7 kW).
- Утасны дамар суурилуулах: Open the wire compartment and install the appropriate welding wire spool (0.1 to 1.2 mm diameter). Thread the wire through the feed mechanism according to the instructions provided on the machine or in a separate wire installation guide.
- Connecting Welding Accessories:
- Газрын Clamp: Газардуулга clamp cable to the appropriate terminal on the machine and securely attach the clamp ажлын хэсэг рүү, цахилгааны сайн холбоог хангах.
- Гагнуурын бамбар: Connect the welding torch cable to the designated connector on the machine. Ensure all connections are tight.
- Gas Cylinder (for MIG-MAG): If performing MIG-MAG welding, connect the gas regulator to the appropriate shielding gas cylinder and then connect the gas hose from the regulator to the machine's gas inlet.
5. Ашиглалтын заавар
Ашиглахын өмнө бүх аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг ойлгож, дагаж мөрдсөн эсэхийг шалгаарай.
5.1. Асаалт ба анхны тохиргоо
- Turn on the main power switch on the machine.
- Select the desired welding process (FLUX or MIG-MAG) using the control panel.
- Adjust the welding current (amperage) and wire feed speed according to the material thickness and wire type. The regulation range is 30 to 145 Ampэрес.
5.2. FLUX Welding (No Gas)
- Ensure the machine is set to FLUX mode.
- No external shielding gas is required as the flux-cored wire produces its own shielding.
- Proceed with welding, maintaining proper arc length and travel speed.
5.3. MIG-MAG Welding (With Gas)
- Ensure the machine is set to MIG-MAG mode.
- Open the valve on the shielding gas cylinder and set the flow rate on the regulator to the recommended level for your application.
- Proceed with welding, ensuring consistent gas flow for proper shielding.
5.4. Spot Welding
- Select the spot welding function on the control panel.
- Adjust the electronic regulation for the spot welding time as required for the material thickness.
- Position the torch and activate the trigger for a controlled spot weld.
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the power supply before performing any maintenance.
- Өдөр бүр: Check the welding torch nozzle and contact tip for wear. Clean any spatter. Ensure the ground clamp connection is clean and secure.
- Долоо хоног тутмын/Сар тутмын: Clean the wire feed rollers and guide tubes. Inspect all cables for damage. Check the cooling fan for obstructions.
- Хадгалах: When not in use, store the machine in a clean, dry environment, protected from dust and moisture.
7. Алдаа засах
Нийтлэг асуудлууд болон тэдгээрийн боломжит шийдлүүдийг энэ хэсгээс харна уу.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машин асахгүй байна. | No power supply; tripped circuit breaker; faulty power cable. | Check power connection and circuit breaker. Inspect power cable for damage. |
| Нуман эсвэл сул нум байхгүй. | Poor ground connection; incorrect settings; worn contact tip; wire feed issue. | Ensure good ground contact. Adjust amperage/wire speed. Replace contact tip. Check wire feed mechanism. |
| Machine overheats and shuts down. | Exceeded duty cycle; blocked ventilation; fan malfunction. | Allow machine to cool down. Ensure clear ventilation. Check fan operation. |
| Poor weld quality (porosity, spatter). | Incorrect gas flow (MIG-MAG); contaminated workpiece; incorrect settings; worn consumables. | Check gas flow and connections. Clean workpiece. Adjust settings. Replace nozzle/tip. |
If problems persist, contact Telwin customer support or a qualified service technician.
8. Техникийн үзүүлэлтүүд
| Онцлог | Үнэ цэнэ |
|---|---|
| Загвар | BIMAX 162 TURBO 230V |
| Хэсгийн дугаар | 821012 |
| Product Code (from image) | 07170110 |
| Network Voltage | 230 V - 50/60 Hz (Single-phase) |
| Хамгийн их хүч | 1.4 / 3.7 Kw |
| Ачаалалгүй ботьtage | 31 вольт |
| Зохицуулалтын хүрээ | 30 / 145 Ampэрес |
| Electrode/Wire Diameter | 0.1-1.2 мм |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 650 x 330 x 490 mm (from OCR image) |
| Зүйлийн жин | 26 KG (from OCR image) / 25 Kilograms (from Amazon data) |
| Thermostatic Protection | Тиймээ |
| Гагнуурын төрлүүд | FLUX (no gas), MIG-MAG (gas), Spot Welding |
| Дэлгэцийн төрөл | Дижитал |
Жич: Үзүүлэлтүүдийг мэдэгдэлгүйгээр өөрчлөх боломжтой. Хамгийн үнэн зөв мэдээллийг авахын тулд бүтээгдэхүүний шошгыг харна уу.
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service, please contact your authorized Telwin dealer or visit the official Telwin webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
Telwin Official Webсайт: www.telwin.com
