Duravit D-Code 07053600092 Handrise Basin Зааварчилгааны гарын авлага

Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your Duravit D-Code 07053600092 Handrise Basin. Суулгаж эхлэхийн өмнө бүх зааврыг анхааралтай уншиж, цаашид лавлах зорилгоор энэ гарын авлагыг хадгална уу.

Аюулгүй байдлын мэдээлэл

Суурилуулах болон ашиглах явцад дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг дагаж мөрдөнө үү.

• Суурилуулалт эхлэхээс өмнө бүх усан хангамжийн шугамыг унтраасан эсэхийг шалгаарай.
• Бээлий, нүдний хамгаалалт гэх мэт зохих хувийн хамгаалалтын хэрэгслийг өмс.
• Керамик бүтээгдэхүүнийг хагарахаас сэргийлж болгоомжтой харьц.
• Хэрэв та суулгах процессын аль нэг хэсэгт эргэлзэж байвал мэргэшсэн сантехникчээс зөвлөгөө аваарай.
• Do not use abrasive cleaners or harsh chemicals on the basin гадаргуу.

Багцын агуулга

Суулгаж эхлэхээс өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:

• Duravit D-Code Handrise Basin (Загвар: 07053600092)
• Fixings (Included)
• Техник хангамж (орсон)
• Installation Template (if applicable, check packaging)

Тохиргоо ба суурилуулалт

This section outlines the steps for properly installing your handrise basin. Ensure you have all necessary tools and materials before proceeding.

Суурилуулалтын өмнөх шалгалт

• Б-г шалгана ууasin for any damage prior to installation. Do not install damaged products.
• Confirm that the wall structure is adequate to support the weight of the basin and any associated plumbing.
• Ensure water supply and drainage connections are correctly positioned according to local plumbing codes.

Mounting the Basin

1. Determine the desired mounting height for the basin. The typical height for the top rim of a basin is 80-85 cm (31.5-33.5 inches) from the finished floor.
2. Mark the positions for the mounting bolts on the wall using the provided template or by carefully measuring the basin's fixing points.
3. Drill holes at the marked positions, ensuring they are appropriate for the supplied fixings.
4. Insert the wall plugs (if provided) and secure the mounting bolts into the wall. Ensure they are firmly anchored.
5. Carefully lift the basin and align the mounting holes on the basin with the bolts protruding from the wall.
6. Slide the basin onto the bolts. Install washers and nuts, then tighten them securely but do not overtighten, as this can crack the ceramic.
7. Connect the water supply lines to the faucet (not included) and the drain assembly to the basinБүх холболтууд ус нэвтэрдэггүй эсэхийг шалгаарай.
8. Apply a bead of silicone sealant around the back edge of the basin where it meets the wall to prevent water ingress.

Зураг 1: Дээрээс доош view with key dimensions for the Duravit D-Code Handrise Basin. Dimensions include 345mm width, 360mm total width, 270mm depth, and 130mm from the back edge to the center of the tap hole.

Зураг 2: Хажуу тал view with key dimensions for the Duravit D-Code Handrise Basin. Dimensions include 160mm tap platform width, 45mm from back edge to basin rim, 130mm basin depth, 850mm recommended total height from floor, and specific measurements for mounting points (655mm, 605mm) and drain center (120mm).

Figure 3: Duravit D-Code 14 1/8" Handrise Basin, Alpine White, showcasing its design and tap platform.

Ашиглалтын заавар

The Duravit D-Code Handrise Basin is designed for standard bathroom use. Operate the faucet (not included) as per its manufacturer's instructions to control water flow and temperature. The basin features a tap platform and a left hole tapping for faucet installation.

Засвар үйлчилгээ

Proper care will ensure the longevity and appearance of your Duravit basin.

• Цэвэрлэгээ: Wipe with a dry cloth after each use to prevent water spots and mineral buildup. For deeper cleaning, use a mild, non-abrasive cleaner and a soft cloth. Rinse thoroughly with water and dry.
• зайлсхийх: Do not use abrasive powders, scouring pads, strong acids, or alkaline cleaners, as these can damage the ceramic surface.
• Ус зайлуулах хоолой: Regularly clean the drain area to prevent blockages.

Алдааг олж засварлах

Хэрэв танд асуудал тулгарвал дараах нийтлэг шийдлүүдийг үзнэ үү.

• Leaking around connections: Check all plumbing connections for tightness. Ensure thread sealant or plumber's tape was used correctly.
• Удаан ус зайлуулах: The drain may be partially clogged. Remove the drain stopper and clear any debris. If the issue persists, a plumber may be required.
• Water spots/stains: Refer to the cleaning instructions in the Maintenance section. Persistent hard water stains may require specialized ceramic cleaner.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the official Duravit webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Онлайн дэмжлэг: www.duravit.us