Танилцуулга
This manual provides detailed instructions for the safe and efficient operation of your Utilitech Mechanical Residential Plug-In Timer. Please read this manual thoroughly before use and retain it for future reference.
The Utilitech Mechanical Residential Plug-In Timer is designed to automate the on/off cycles of electrical devices, helping to conserve energy and enhance convenience. It features up to 48 on/off settings per day and includes 4 outlets for connecting multiple devices.
Бүтээгдэхүүн дууссанview
Зураг 1: Урд view of the Utilitech Mechanical Residential Plug-In Timer, showing the central dial with time markings and surrounding pins.
The timer features a circular dial with hour markings (AM/PM) and a series of push-down pins around its circumference. These pins control the on/off cycles. A manual override switch is typically located on the top or side of the unit.
Гол онцлогууд:
- Up to 48 on/off settings per 24-hour period.
- Non-removable pins for easy programming.
- Designed for energy saving.
- Equipped with 4 outlets for multiple device connections.
- Simple plug-in installation.
Тохиргоо
Анхны тохиргоо:
Таймерыг задлах: Carefully remove the timer from its packaging. Inspect for any damage.
Залгаас: Plug the timer into a standard 120V AC wall outlet. Ensure the outlet is easily accessible.
Charge Battery (if applicable): Although this model does not require batteries for operation, some timers may have an internal battery for timekeeping during power outages. If so, allow it to charge for at least 30 minutes before programming.
Одоогийн цагийг тохируулах: Rotate the entire dial clockwise until the current time aligns with the "TIME" arrow indicator on the timer's face. The dial is marked with AM and PM hours (e.g., 12 PM for Noon, 12 AM for Midnight).
Figure 2: Detail of the timer dial, highlighting the "TIME" arrow and the 24-hour markings for setting the current time.
Ашиглалтын заавар
Programming On/Off Times:
The timer uses push-down pins around the dial to set the on/off intervals. Each pin represents a 30-minute segment.
Зүүг таних: Locate the small, grey pins around the outer edge of the dial. Each pin corresponds to a 30-minute interval.
Set "ON" Times: Push down the pins corresponding to the time periods you want the connected device to be ON. When a pin is pushed down, it activates the power during that 30-minute segment as the dial rotates.
Set "OFF" Times: Leave the pins in the "up" position for the time periods you want the connected device to be OFF. When a pin is in the up position, it deactivates the power during that 30-minute segment.
Зураг 3: Нарийвчилсан view of the timer's outer ring with individual pins, illustrating how to push them down for "ON" periods.
Гараар дарах шилжүүлэгч: The timer typically has a manual override switch (often a slider or button) located on the top or side. This switch allows you to bypass the programmed settings and keep the device either continuously ON or OFF. Ensure this switch is in the "Timer" or "Auto" position for programmed operation.
Төхөөрөмжийг холбох: Plug the device you wish to control into one of the 4 outlets on the timer. Ensure the device's own power switch is set to the "ON" position.
Example Programming:
To turn a lamp on from 6:00 PM to 10:00 PM:
- Locate the 6 PM mark on the dial.
- Push down all pins from 6 PM to 10 PM.
- Ensure all other pins are in the "up" position.
- Set the current time on the dial.
- l-г залгаарайamp into the timer.
Засвар үйлчилгээ
The Utilitech Mechanical Residential Plug-In Timer requires minimal maintenance.
Цэвэрлэгээ: Цэвэрлэхийн өмнө таймерыг цахилгааны залгуураас салга. Гадна талыг нь зөөлөн, хуурай даавуугаар арчина. Шингэн цэвэрлэгч эсвэл зүлгүүрийн материал бүү хэрэглэ.
Хадгалах: Хэрэв таймерыг удаан хугацаагаар хадгалах бол цэвэр, хуурай эсэхийг шалгаарай. Нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
Шалгалт: Periodically inspect the timer and its cord for any signs of damage, such as frayed wires or cracked casing. Хэрэв гэмтэл илэрсэн бол нэн даруй ашиглахаа зогсоож, нэгжийг солино.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж програмчлагдсаны дагуу асаах/унтрахгүй. |
|
|
| Цаг хэмжигч эргэхгүй байна. |
|
|
| Timer makes a rattling or loud noise. |
|
|
Үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 358707 |
| Хэсгийн дугаар | TM20DHBL |
| Брэнд | Ашигтай технологи |
| Төрөл | Mechanical Residential Plug-In Timer |
| Гаралтын тоо | 4 |
| Өдөр тутмын тохиргоо | Up to 48 on/off settings (30-minute intervals) |
| Суурилуулах төрөл | Залгаастай холбох хэрэгсэл |
| Өнгө | Цагаан |
| Зүйлийн жин | 6.4 унц |
| Багцын хэмжээ | 6.7 x 4.1 x 2.1 инч |
| Батерей шаардлагатай | Үгүй |
| UPC | 070686507131 |
Аюулгүй байдлын мэдээлэл
Please read and follow all safety instructions to prevent injury or damage.
Зөвхөн дотор ашиглах: Энэ таймерыг зөвхөн хуурай газар дотор ашиглах зориулалттай. Ус, чийгэнд бүү өрт.
Цахилгааны үнэлгээ: Do not exceed the electrical rating of the timer. Overloading can cause overheating and fire.
Газардуулга: Ensure the timer is plugged into a properly grounded outlet if applicable. This model is a 2-prong device.
Хүүхэд ба тэжээвэр амьтад: Хүүхэд, тэжээвэр амьтдын гар хүрэхгүй газар хадгална уу.
Салгах: Always unplug the timer from the wall outlet before cleaning or when not in use for extended periods.
Засвар: Do not attempt to open or repair the timer yourself. Refer all servicing to qualified personnel.
Баталгаат болон дэмжлэг
For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service. Keep your purchase receipt for warranty claims.
Note: Specific warranty terms and contact information may vary. Please consult the documentation included with your product.
