1. Танилцуулга
This manual provides essential information for the proper installation, operation, and maintenance of your ASHCROFT Vacuum Gauge. This test gauge is designed for precise vacuum measurement, featuring a durable construction suitable for industrial applications.
The gauge has a 2-1/2 inch dial, measures vacuum from 30 inches of Mercury (Hg) to 0, and features a 1/4 inch NPT connection located at the lower back. It is constructed with a 304 stainless steel case, 316 stainless steel socket and tube, and a polycarbonate lens. The gauge is filled with glycerin for dampening and enhanced performance.
Зураг 1: ASHCROFT Vacuum Gauge. This image displays the front view of the vacuum gauge, highlighting its stainless steel casing, white dial with black markings, and the ASHCROFT DURALIFE branding. The gauge face indicates measurements in psi and notes "Welded AISI 316 tube & socket U.S.A."
2. Аюулгүй байдлын мэдээлэл
Always observe standard safety precautions when handling and installing pressure and vacuum gauges. Failure to do so may result in injury or damage to equipment.
- Ensure the system is depressurized before installing or removing the gauge.
- Do not exceed the specified operating range of 30" Hg Vac to 0.
- Verify compatibility of the gauge's wetted parts (316 Stainless Steel) with the process media.
- Protect the gauge from extreme temperatures outside the -40°F to 150°F operating range.
- Handle with care to avoid dropping or impacting the gauge, which can affect accuracy.
3. Тохиргоо ба суурилуулалт
Proper installation is crucial for accurate readings and long service life.
- Бэлтгэл: Ensure the connection port on your system is clean and free of debris.
- Холболт: The gauge features a 1/4 inch NPT (National Pipe Taper) connection. Apply appropriate thread sealant (e.g., PTFE tape) to the male threads of the gauge connection.
- Суурилуулалт: Carefully thread the gauge into the system's female NPT port. Tighten using a wrench on the wrench flats of the gauge connection. Do not overtighten or apply torque to the gauge case.
- Баримтлал: The connection location is lower back, allowing for direct mounting or panel mounting with appropriate accessories (not included). Ensure the dial is easily visible for reading.
4. Ашиглалтын заавар
The ASHCROFT Vacuum Gauge provides accurate vacuum measurements within its specified range.
- Хэмжигчийг унших нь: The dial is marked from 30" Hg Vac (full vacuum) to 0 (atmospheric pressure). The smallest graduation is 0.5" Hg, allowing for precise readings.
- Нарийвчлал: This gauge has an accuracy of +/-1.0% of span, ensuring reliable measurements for test applications.
- Температурын талаар анхаарах зүйлс: The gauge is designed to operate effectively within a temperature range of -40°F to 150°F. Operating outside this range may affect accuracy and longevity.
- Glycerin Fill: The glycerin fill dampens pointer pulsation caused by vibration and pressure surges, improving readability and extending the life of the gauge movement.
5. Засвар үйлчилгээ
Regular maintenance ensures the longevity and accuracy of your vacuum gauge.
- Цэвэрлэгээ: Clean the exterior of the gauge, especially the polycarbonate lens, with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens or case.
- Шалгалт: Periodically inspect the gauge for any signs of damage, such as cracks in the lens, dents in the case, or bent pointer. Check the connection for leaks.
- Дахин тохируулга: While designed for long-term accuracy, professional recalibration may be necessary if the gauge is subjected to severe conditions or if accuracy is critical for your application.
- Хадгалах: When not in use, store the gauge in a clean, dry environment within its operating temperature range.
6. Алдаа засах
Дараах нийтлэг асуудлууд болон тэдгээрийн боломжит шийдлүүдийг үзнэ үү.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Буруу Унших | Gauge exposed to over-vacuum; physical damage; extreme temperature. | Verify operating conditions; inspect for damage; allow gauge to normalize temperature. Consider professional recalibration or replacement. |
| Pointer Fluctuation | System vibration; rapid pressure changes. | The glycerin fill helps dampen this; ensure gauge is securely mounted. If severe, consider a snubber or remote mounting. |
| Холболт дээрх гоожилт | Improperly applied thread sealant; insufficient tightening. | Depressurize system, remove gauge, reapply thread sealant, and re-install, ensuring proper tightening. |
7. Техникийн үзүүлэлтүүд
Detailed technical specifications for the ASHCROFT Vacuum Gauge (Model: 251009SW02BXLLVAC).
- Хэмжүүрийн төрөл: Туршилт
- Залгах хэмжээ: 2-1/2 инч
- Хүрээ: 30" Hg Vac to 0
- Холболтын хэмжээ: 1/4" NPT
- Холболтын байршил: Доод нуруу
- Smallest Graduation: 0.5" Hg
- Нарийвчлал: +/-1.0%
- Кейсийн материал: 304 зэвэрдэггүй ган
- Кейсийн өнгө: Мөнгө
- Сокет материал: 316 зэвэрдэггүй ган
- Хоолойн материал: 316 зэвэрдэггүй ган
- Бөглөх: Глицерин
- Линзний материал: Поликарбонат
- Ring Material: Зэвэрдэггүй ган
- Ашиглалтын температурын хүрээ: -40°F-ээс 150°F хүртэл
- Цуврал: 1009
- Бүтээгдэхүүний хэмжээ: 3 x 3 x 3 инч
- Барааны жин: 1 фунт
- Гарал үүслийн улс: АНУ
- UPC: 094706106517
8. Баталгаат хугацаа ба дэмжлэг
This ASHCROFT Vacuum Gauge comes with a Үйлдвэрлэгчийн 5 жилийн баталгаат хугацаа. For warranty claims or technical support, please contact ASHCROFT customer service. Retain your proof of purchase for warranty validation.
For further assistance or detailed technical inquiries, please refer to the official ASHCROFT webсайт эсвэл тэдний эрх бүхий борлуулагчтай холбоо барина уу.
