Notifier NBG-12LX

Мэдэгдэл NBG-12LX Галын дохиоллын хаягтай татах станцын хэрэглэгчийн гарын авлага

Model: NBG-12LX

1. Бүтээгдэхүүн дууссанview

The Notifier NBG-12LX is a robust, addressable dual-action manual pull station designed for use in fire alarm systems. It provides a clear and immediate means for occupants to manually initiate a fire alarm signal, alerting others and triggering emergency response procedures. Its durable construction and straightforward operation make it an essential component for fire safety in various building types.

Урд view of the Notifier NBG-12LX fire alarm pull station, red with 'FIRE' and 'PUSH IN PULL DOWN' labels.

Зураг 1: Урд view of the Notifier NBG-12LX Manual Pull Station.

This image displays the front of the Notifier NBG-12LX, highlighting its red casing, the prominent "FIRE" label, and the "PUSH IN PULL DOWN" instructions for activation. A keyhole for resetting the device is visible at the bottom right.

2. Тохиргоо ба суурилуулалт

Installation of the NBG-12LX should only be performed by qualified personnel in accordance with all local and national electrical and fire codes. This device is designed for wall mounting and requires connection to a compatible fire alarm control panel.

2.1 Суурилуулалт

  1. Select a suitable mounting location that is easily accessible and visible, typically near exits or stairwells, as per local fire safety regulations.
  2. Ensure the mounting surface is flat and secure.
  3. Use appropriate screws (such as those provided, if applicable) to secure the pull station to the wall or electrical box.
Notifier NBG-12LX pull station with instruction manual, key, and mounting screws.

Figure 2: Notifier NBG-12LX components including manual, key, and screws.

This image shows the Notifier NBG-12LX pull station alongside its instruction manual, a key for resetting the device, and a small bag containing mounting screws, illustrating the items typically included for installation.

2.2 Утас

The NBG-12LX is an addressable device and must be wired to an addressable fire alarm control panel. Refer to the specific wiring diagrams provided with your fire alarm control panel and the NBG-12LX installation manual for detailed instructions.

  • Connect the appropriate field wiring to the terminal block on the back of the pull station.
  • Ensure all connections are secure and comply with wiring standards.
  • Verify proper addressing of the device on the fire alarm control panel.
Буцах view of the Notifier NBG-12LX fire alarm pull station showing wiring terminals.

Зураг 3: Ар талд view of the Notifier NBG-12LX with wiring terminals.

This image displays the back of the Notifier NBG-12LX, revealing the internal wiring terminals and a strip gauge, which are crucial for proper electrical connection to the fire alarm system.

3. Ашиглалтын заавар

The Notifier NBG-12LX is a dual-action pull station, meaning it requires two distinct actions to activate the alarm, reducing the likelihood of accidental activation.

3.1 Activating the Alarm

In the event of a fire or other emergency requiring immediate evacuation:

  1. Түлхэх: Firmly push the center bar of the pull station inwards.
  2. Доош нь татах: Once pushed in, pull the bar downwards until it latches in the activated position.

This action will send an alarm signal to the fire alarm control panel, initiating the building's emergency procedures, including sounding alarms and notifying emergency services.

4. Засвар үйлчилгээ

Regular maintenance ensures the reliable operation of your Notifier NBG-12LX pull station. All maintenance should be performed by trained and authorized personnel.

4.1 Ердийн шалгалт

  • Харааны үзлэг: Periodically inspect the pull station for any signs of physical damage, tampering, or obstruction. Ensure all labels are legible.
  • Функциональ туршилт: Conduct functional tests as required by local fire codes and manufacturer recommendations (e.g., annually). This typically involves activating the pull station and verifying that the alarm signal is received by the control panel.

4.2 Resetting the Pull Station

After activation, the NBG-12LX must be reset using the provided key.

  1. Insert the key into the keyhole located on the bottom right of the pull station.
  2. Turn the key to reset the pull station to its normal, non-alarm state.
  3. Түлхүүрийг ав.

Ensure the fire alarm control panel is also reset after the pull station has been restored.

5. Алдаа засах

If you encounter issues with your Notifier NBG-12LX, consult the following common troubleshooting steps. For complex issues, contact a qualified fire alarm technician.

АсуудалБоломжит шалтгаанШийдэл
Pull station does not activate alarm.Incorrect wiring, device not addressed, control panel issue, physical damage.Verify wiring connections. Check device addressing on control panel. Inspect for damage. Consult control panel manual.
Pull station cannot be reset.Key not fully inserted, internal mechanism jammed, control panel not reset.Ensure key is fully inserted and turned. Gently attempt to reset. Reset the fire alarm control panel first.
Хуурамч дохиолол.Accidental activation, faulty device, wiring issue.Educate users on proper activation. Inspect device for damage. Check wiring for shorts or loose connections.

6. Техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
БрэндМэдэгдэл
Загварын дугаарNBG-12LX
ТөрөлХаягтай гар татах станц
Үйл ажиллагааDual Action (Push In, Pull Down)
Reset MechanismKeyed Operation
ӨнгөУлаан
СуурилуулалтХанын бэхэлгээ
МатериалХуванцар
Зүйлийн жин6.4 унц (ойролцоогоор 0.4 фунт)
Бүтээгдэхүүний хэмжээс5.5 x 4 x 2 инч
Эрчим хүчний эх үүсвэрCorded Electric (via FACP)
Батерей шаардлагатай юу?Үгүй
UPC020103106041, 643485653622
Packaging of Notifier NBG-12LX showing product details and certifications.

Figure 4: Notifier NBG-12LX packaging with specifications and certifications.

This image displays the product packaging, which lists key features such as "Dual Action," "Key Lock Reset," "Addressable," and "Screw Terminals," along with UL and FM certifications and manufacturer contact information.

7. Баталгаат хугацаа ба дэмжлэг

For specific warranty information, please refer to the documentation included with your purchase or contact Notifier directly. Notifier products are designed for reliability and performance.

For technical support, service, or further inquiries, please contact Notifier customer service or a certified fire alarm system professional.

  • Үйлдвэрлэгч: Honeywell-ийн мэдэгдэгч
  • Webсайт: www.notifier.com
  • Утас: (203) 484-7161
  • Факс: (203) 484-7118

Холбогдох баримт бичиг - NBG-12LX

Урьдчилсанview NOTIFIER NBG-12LX Addressable Pull Station Manual
Comprehensive guide to the NOTIFIER NBG-12LX Addressable Pull Station, covering its description, installation, operation, wiring, and address setting for fire alarm systems.
Урьдчилсанview Мэдүүлэгч NBG-12LX Хаягтай татах станц суурилуулах, ажиллуулах заавар
Энэхүү баримт бичигт Notifier NBG-12LX хаягийн татах станцын суурилуулалт, утас, ашиглалтын нарийвчилсан зааврыг багтаасан болно. Энэ нь хаягийг тохируулах, утас холбох, угсрах, хос үйлдэлт гарын авлагын татах станцын ажиллагааг хамарна.
Урьдчилсанview Notifier NBG-12LX Addressable Manual Fire Alarm Station - Product Overview
Нарийвчилсан бүтээгдэхүүн дууслааview of the Notifier NBG-12LX dual-action addressable manual fire alarm station, including features, specifications, installation, operation, and agency approvals.
Урьдчилсанview Мэдүүлэгч NBG-12LPS Дохионы өмнөх станц: Суурилуулалт, ашиглалт, техникийн үзүүлэлтүүд
Notifier NBG-12LPS болон NBG-12LPSP гар татах станцуудын дэлгэрэнгүй гарын авлага. Шилжүүлэгчийн контактын зэрэглэл, суурилуулалт, утас, ажиллагаа, хос үйлдэлт бариул, дохионы өмнөх болон ерөнхий дохиоллын функцууд, ADA-ийн нийцэл, галын дохиоллын системийг дахин тохируулах процедурыг хамарна.
Урьдчилсанview Мэдүүлэгч NBG-12LO/-12LOB Гадна ашиглах зориулалттай гар аргаар татах станц
Энэхүү баримт бичигт гадаа ашиглах зориулалттай NBG-12LO/-12LOB гарын авлага татах станцын талаарх дэлгэрэнгүй мэдээллийг агуулсан болно. Энэ нь бүтээгдэхүүний тодорхойлолт, онцлог, унтраалгын контактын зэрэглэл, хаалгыг бэхлэх, залгах журам, утас тавих заавар, гадаа суурилуулах шаардлага, үйл ажиллагааны удирдамж зэргийг багтаасан болно. Татах станц нь кодчилдоггүй, хоёр үйлдэлт загвар бөгөөд түлхүүрийн түгжээг дахин тохируулах, UL жагсаалт, ADA-д нийцсэн загвар юм.
Урьдчилсанview NOTIFIER AFP-200 Analog Fire Panel - Technical Specifications and Features
Дэлгэрэнгүйview of the NOTIFIER AFP-200 Analog Fire Panel, covering its features, system capacity, specifications, compatible devices, and programming methods. Includes agency listings and product information.