Fluke 355 True RMS Clamp-Тоолуурын хэрэглэгчийн гарын авлага

Танилцуулга

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter designed for precise measurement of current, voltage, frequency, and resistance in various electrical testing applications. It features a robust clamp mechanism for non-contact current measurement and a comprehensive set of functions for professional use, ensuring accurate readings for both linear and non-linear loads.

Аюулгүй байдлын мэдээлэл

Always adhere to safety precautions when working with electrical equipment. This device is designed to meet IEC safety standard 61010-2-032.

• CAT IV, 600V: Suitable for measurements at the source of the low-voltage installation, such as electricity meters and primary over-current protection equipment.
• CAT III, 1,000V: Suitable for measurements within fixed installations, including switches and industrial equipment permanently connected to the fixed installation.

Ensure proper personal protective equipment (PPE) is used, and always follow local safety regulations when operating this device.

Хайрцагт юу байна

Your Fluke 355 Clamp-Meter package includes the following components:

• Fluke 355 digital clamp-метр
• Туршилтын хар тугалганы багц
• Туршилтын датчикийн багц
• Аллигаторын клипний багц
• (6) АА батерей
• Зөөлөн зөөвөрлөгч
• Хэрэглэгчийн гарын авлага

Image: All components included with the Fluke 355 Clamp-Meter, neatly arranged.

Бүтээгдэхүүний онцлог

• Жинхэнэ RMS мэдрэгч: Provides accurate readings for both linear and non-linear loads, regardless of waveform.
• High Current Measurement: Measures AC and DC current up to 2,000A (1,400A AC RMS).
• Large Jaw Opening: 58mm (2.3 inches) jaw opening accommodates large or multiple conductors for non-contact current measurement.
• Ботьtage Хэмжилт: Арга хэмжээ АС ботьtage 600V хүртэл ба DC voltage 1,000 В хүртэл.
• Frequency and Resistance: Measures frequency up to 1kHz and resistance up to 400kΩ.
• Inrush Current Function: Analyzes surge current during motor startup and other inductive loads for stable measurements.
• Бага нэвтрүүлэх шүүлтүүр: Reduces high-frequency interference for accurate measurements of complex waveforms.
• Хамгийн бага/хамгийн их функц: Toggles to display lowest, highest, and average readings.
• Өгөгдөл хадгалах: Freezes the reading on the display for easy documentation in tight spaces.
• Тасралтгүй байдлын дуугаралт: Confirms electrical continuity.
• Арын гэрэлтүүлэгтэй LCD: Improves visibility in low-light conditions, with automatic backlight shut-off.
• Автомат унтрах: Conserves battery life by automatically turning off after 20 minutes of non-use.
• Батерей багатай үзүүлэлт: Signals when batteries need replacement.

Тохиргоо

Батерей суурилуулах

The Fluke 355 requires six 1.5V AA batteries for operation. These are typically included with your purchase.

1. Төхөөрөмжийн арын хэсэгт зайны тасалгааны тагийг олоорой.
2. Халив ашиглан тагийг онгойлгох хэрэгтэй.
3. Insert the six AA batteries, ensuring correct polarity (+/-).
4. Зайны тасалгааны тагийг сольж, бэхлэнэ.

Анхны үзлэг

Before first use, inspect the clamp-meter, test leads, and accessories for any signs of damage. Do not use the device if any damage is observed.

Ашиглалтын заавар

Асаах/унтраах

Turn the rotary switch to any measurement function to power on the device. Turn the rotary switch to "OFF" to power off. The device will automatically power off after 20 minutes of inactivity to conserve battery life.

Measuring AC/DC Current (Clamp Чиг үүрэг)

1. Turn the rotary switch to the "A AC+DC" position.
2. Press the jaw release lever to open the clamp эрүү.
3. cl-ийг байрлуулamp jaws around a single conductor. Ensure the jaws are fully closed.
4. LCD дээрх одоогийн утгыг уншина уу.

Image: The clamp jaws of the Fluke 355 securely closed around an electrical conductor for current measurement.

Хэмжих ботьtage (AC/DC)

1. Connect the test leads to the appropriate input jacks (COM and V).
2. Turn the rotary switch to the "V AC+DC" position.
3. Туршилтын мэдрэгчийг хэмжих хэлхээ эсвэл бүрэлдэхүүн хэсэгт холбоно.
4. боть уншина ууtagLCD дээрх e утга.

Measuring Resistance (Ω)

1. Connect the test leads to the appropriate input jacks (COM and Ω).
2. Эргэдэг унтраалгыг "Ω" байрлалд эргүүлнэ.
3. Эсэргүүцлийг хэмжихээс өмнө хэлхээг хүчдэлгүй болгосон эсэхийг шалгаарай.
4. Хэмжих гэж буй эд анги дээр туршилтын датчикуудыг холбоно уу.
5. LCD дэлгэц дээрх эсэргүүцлийн утгыг уншина уу.

Бусад функцууд

• RANGE: Manually select the measurement range if auto-ranging is not desired.
• БАРИХ: Дэлгэц дээрх одоогийн заалтыг царцаах бол дарна уу. Суллахын тулд дахин дарна уу.
• ТЭГ: Used to zero out DC current readings or resistance readings for lead compensation.
• Гц: Давтамжийг хэмждэг.
• ЭХЛЭХ: Measures the peak current during motor startup.
• MIN MAX: Toggles through minimum, maximum, and average readings captured during a measurement session.
• ШҮҮЛГҮҮР: Activates a low-pass filter to reduce electrical noise for stable readings.

Зураг: Нарийвчилсан view Fluke 355 Cl-ийнamp-Meter's display and control panel.

Засвар үйлчилгээ

Цэвэрлэгээ

Тоолуурыг цэвэрлэasing зартайamp даавуу болон зөөлөн угаалгын нунтаг. Зүлгүүрийн бодис эсвэл уусгагч хэрэглэж болохгүй. Дэлгэцийг цэвэр, хуурай байлга.

Зай солих

When the low-battery indicator appears on the display, replace all six AA batteries promptly to ensure accurate measurements. Follow the battery installation steps outlined in the Setup section.

Хадгалах

Cl хадгална ууamp-meter in its soft carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.

Алдааг олж засварлах

If the Fluke 355 Clamp-Meter is not functioning as expected, consider the following:

• Дэлгэц / хүч байхгүй: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the rotary switch is not in the "OFF" position.
• Буруу уншилтууд: Verify that the correct measurement function is selected. Ensure test leads are properly connected and not damaged. For current measurements, ensure the clamp jaws are fully closed around a single conductor.
• Тасралтгүй байдлын дохиолол ажиллахгүй байна: Ensure the device is in the continuity measurement mode and the circuit is de-energized.

For persistent issues, refer to the official Fluke support resources or contact customer service.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

Fluke Corporation provides high-quality testing tools. For warranty information, technical support, or service, please visit the official Fluke webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.

Та нэмэлт мэдээлэл, тусламжийн эх сурвалжийг эндээс авах боломжтой Амазон дээрх Fluke дэлгүүр.