1. Танилцуулга
Thank you for choosing the Showlite SB-216 LED Stage Bar. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Аюулгүй ажиллагааны заавар
WARNING: Risk of electric shock. Do not open the casing.
- Ensure the device is connected to a grounded power outlet.
- Төхөөрөмжийг бороо, чийгэнд бүү тавь.
- Нүдний гэрлийн эх үүсвэрт шууд өртөхөөс зайлсхий.
- Цэвэрлэх, засвар үйлчилгээ хийхээс өмнө цахилгааныг салга.
- Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд хангалттай агааржуулалтыг хангана.
- Зөвхөн мэргэшсэн ажилтнууд засвар хийх ёстой.
3. Бүтээгдэхүүн дууссанview
The Showlite SB-216 is an LED stage bar designed for various lighting applications, featuring multiple operating modes and DMX control capabilities.
3.1 Гол онцлогууд
- 216 x 10mm RGB LEDs (72 Red, 72 Green, 72 Blue)
- 8 individually controllable segments (3x9 LEDs per color)
- Long LED lifespan: up to 100,000 hours
- Multiple operating modes: DMX-512, Master/Slave, Sound to Light
- 6 DMX channel modes: 3, 5, 8, 14, 24, and 26 channels
- Electronic dimming (0-100%) and strobe effect (0-20 Hz) with adjustable speed
- Integrated microphone with sensitivity adjustment for Sound to Light mode
- LED display and 4 control buttons for configuration
- 3-pin XLR DMX Input/Output
- Цацрагийн өнцөг: 25 °
- Бат бөх хөнгөн цагаан орон сууц
- Cold device output for power chaining multiple units
3.2 Бүрэлдэхүүн хэсэг
Familiarize yourself with the main components of your SB-216 LED Stage Bar:
4. Тохиргоо
4.1 Суурилуулалт
The SB-216 LED Stage Bar is equipped with adjustable mounting brackets. These brackets can be used to position the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure all mounting hardware is securely fastened and capable of supporting the unit's weight (2.2 kg).
4.2 Эрчим хүчний холболт
Connect the provided power cable to the 'POWER INPUT' socket on the rear panel and then to a suitable grounded electrical outlet (90-240V AC, 50/60Hz). The unit consumes 25 watts.
4.3 DMX холболт (заавал биш)
For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the 'DMX INPUT' on the SB-216. To daisy-chain multiple units, connect a DMX cable from the 'DMX OUTPUT' of the first unit to the 'DMX INPUT' of the next unit. Ensure the last unit in the chain has a DMX terminator connected to its 'DMX OUTPUT' for stable signal transmission.
5. Үйлдлийн горимууд
The SB-216 offers three primary operating modes, selectable via the control panel and LED display.
5.1 Хяналтын самбарын навигаци
Use the four buttons below the LED display to navigate menus and adjust settings:
- Цэс: Enters/exits menu, cycles through main menu options.
- ДЭЭШЭЭ ДООШОО: Navigates through options or increases/decreases values.
- ОРУУЛАХ: Confirms selection or saves settings.
5.2 DMX-512 Mode
In DMX mode, the unit is controlled by an external DMX controller. Set the DMX address and select one of the 6 DMX channel modes (3, 5, 8, 14, 24, or 26 channels) using the control panel. The 26-channel mode allows for individual color mixing per segment.
5.3 Мастер/Боол горим
Connect multiple SB-216 units via DMX cables. Set one unit as 'Master' and the others as 'Slave'. The Master unit will control the lighting effects for all connected Slave units, synchronizing their operation.
5.4 Sound to Light Mode
The integrated microphone detects ambient sound, and the unit reacts with dynamic light patterns. Adjust the microphone sensitivity using the 'MIN/MAX' knob on the rear panel to fine-tune the response to sound levels.
5.5 Standalone Programs
The unit may include pre-programmed automatic light shows and static color settings accessible via the control panel in standalone mode.
6. Засвар үйлчилгээ
6.1 Цэвэрлэгээ
Regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the LED lenses free of dust and debris to maintain optimal light output.
6.2 Гал хамгаалагч солих
If the unit does not power on, check the fuse located on the rear panel. Disconnect the power cable before attempting to replace the fuse. Use only a fuse of the same type and rating as specified by the manufacturer.
6.3 Хадгалалт
When not in use for extended periods, store the unit in a dry, dust-free environment, preferably in its original packaging.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна | Цахилгаан хангамж байхгүй; Гал хамгаалагч шатсан | Check power cable connection; Replace fuse (see Maintenance) |
| Гэрлийн гаралт байхгүй | Unit is off; Dimmer channel at 0%; Program error | Ensure unit is on; Check DMX dimmer channel; Select a different program |
| DMX удирдлага ажиллахгүй байна | Incorrect DMX address; Faulty DMX cable; No DMX terminator | Verify DMX address setting; Check DMX cable connections; Use a DMX terminator on the last unit |
| Sound to Light not responding | Microphone sensitivity too low; No sound detected | Adjust 'MIN/MAX' sensitivity knob; Ensure sufficient sound levels |
8. Техникийн үзүүлэлтүүд
- Загвар: Showlite SB-216
- LED: 216 x 10mm RGB (72R, 72G, 72B)
- Сегментүүд: 8 segments, 3x9 LEDs per color
- Үйлдлийн горимууд: DMX-512, Master/Slave, Sound to Light
- DMX сувгууд: 3, 5, 8, 14, 24, 26 channels
- Бүдэгрүүлж байна: 0-100% Electronic
- Strobe нөлөө: 0-20 Гц, тохируулах боломжтой
- Цацрагийн өнцөг: 25°
- Эрчим хүчний хангамж: 90-240V хувьсах гүйдэл, 50/60Гц
- Эрчим хүчний хэрэглээ: 25 ватт
- Ашиглалтын температур: -20 хэмээс 40 хэм хүртэл
- Орон сууцны материал: Хөнгөн цагаан
- Хэмжээ (LxHxP): 975 x 67 x 63 mm (housing only)
- Жин: 2.2 kg (with feet)
- Загварын дугаар: 00028581
9. Баталгаат хугацаа ба дэмжлэг
Баталгаат мэдээлэл болон техникийн дэмжлэг авахын тулд худалдан авалт хийхдээ өгсөн баримт бичигт хандах эсвэл худалдагчтайгаа холбоо барина уу. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.
