1. Танилцуулга
Thank you for choosing the Kapego Ultra 70 Dimmable LED Power Supply. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your device. Please read this manual thoroughly before installation and keep it for future reference.
1.1 Аюулгүй байдлын анхааруулга
- Цахилгааны аюул: Суурилуулалт болон засвар үйлчилгээг орон нутгийн цахилгааны код, журмын дагуу мэргэшсэн цахилгаанчин гүйцэтгэх ёстой.
- Суурилуулах, засвар үйлчилгээ хийх эсвэл алдааг олж засварлахаас өмнө цахилгааныг салга.
- Хэрэв төхөөрөмж эвдэрсэн бол ажиллуулж болохгүй.
- Хэт халалтаас урьдчилан сэргийлэхийн тулд зохих агааржуулалтыг хангах.
- This device is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not expose to moisture or water.
2. Бүтээгдэхүүн дууссанview
The Kapego Ultra 70 is a constant voltage electronic transformer designed for dimmable LED lighting applications. It features phase-cut dimming control, allowing for smooth adjustment of light intensity when paired with compatible dimmers.
2.1 Гол онцлогууд
- Материал: Durable plastic housing.
- Өнгө: Хар өнгөлгөө.
- Эрчим хүчний гаралт: 0-70.00W, suitable for various LED loads.
- Хяналт: Phase-cut dimming for compatibility with leading and trailing edge dimmers.
- Оролтын хэмжээtage: 220-240V AC, 50-60Hz.
- Гаралтын ботьtage: 12V хувьсах гүйдэл.
2.2 Бүтээгдэхүүний зураг
3. Тохиргоо ба суурилуулалт
Чухал: All installation work must be carried out by a qualified electrician. Ensure power is disconnected at the main circuit breaker before proceeding.
- Эрчим хүчийг салгах: Turn off the main power supply to the circuit where the power supply will be installed. Verify that the power is off using a voltage шалгагч.
- Суурилуулалт: Choose a suitable, dry location for mounting the power supply, ensuring adequate ventilation. The device is not waterproof (IP20). Secure the power supply using appropriate fasteners.
- Input Wiring (PRI): Connect the main AC power supply (220-240V AC, 50-60Hz) to the input terminals marked 'PRI' (L and N). Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Connect the Live (L) wire to the 'L' terminal.
- Connect the Neutral (N) wire to the 'N' terminal.
- Output Wiring (SEC): Connect your 12V AC LED lighting fixtures to the output terminals marked 'SEC'. Ensure the total wattage of the connected LED fixtures does not exceed 70W. Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Гэрлийн бүдэгрүүлэгч холболт (заавал биш): If using a dimmer, connect it on the primary (input) side of the power supply, following the dimmer manufacturer's instructions. This power supply is designed for phase-cut dimmers.
- Эцсийн шалгалт: Double-check all connections for proper polarity and secure fastening. Ensure no bare wires are exposed.
- Эрчим хүчийг сэргээх: Хэлхээний хүчийг сэргээх.
4. Ашиглалтын заавар
Once properly installed, the Kapego Ultra 70 Dimmable LED Power Supply operates automatically when power is supplied. If a compatible phase-cut dimmer is connected to the input, you can adjust the brightness of the connected LED lights using the dimmer control.
- Асаах/унтраах: Use the main light switch or dimmer switch to turn the connected LED lights on or off.
- Бүдэгрүүлж байна: Rotate or adjust the dimmer control to increase or decrease the light output. Ensure the dimmer is compatible with phase-cut electronic transformers.
5. Засвар үйлчилгээ
The Kapego Ultra 70 Dimmable LED Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Цэвэрлэгээ: Ensure power is disconnected before cleaning. Wipe the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids.
- Шалгалт: Periodically inspect the wiring and connections for any signs of damage, loose connections, or overheating. Address any issues promptly.
- Агааржуулалт: Ensure that the power supply's ventilation openings are not obstructed.
6. Алдаа засах
If you experience issues with your Kapego Ultra 70 Dimmable LED Power Supply, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Гэрлийн гаралт байхгүй |
|
|
| Анивчих эсвэл тогтворгүй гэрэл |
|
|
| Бүдгэрэлт ажиллахгүй байна |
|
|
If the problem persists after attempting these solutions, please contact a qualified electrician or customer support.
7. Техникийн үзүүлэлтүүд
| Параметр | Үнэ цэнэ |
|---|---|
| Загварын дугаар | 180515 |
| Брэнд | Deko-Light (Kapego) |
| Оролтын хэмжээtage | Хувьсах гүйдлийн 220-240 В, 50-60 Гц |
| Оролтын гүйдэл | 0.29A (PRI) |
| Гаралтын ботьtage | 12V AC (SEC: 11.5V~eff) |
| Гаралтын гүйдэл | 0-6.0A |
| Гаралтын хүч | 0-70.00 Вт |
| Бүдгэрүүлэх хяналт | Phase Cut (Leading/Trailing Edge) |
| Power Factor (λ) | ≥0.99 |
| Материал | Хуванцар |
| Өнгө | Хар |
| IP үнэлгээ | IP20 (Усны хамгаалалтгүй) |
| Ашиглалтын температур (т) | 50°C |
| Кейсийн температур (tc) | 80°C |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 115 мм x 45 мм x 28 мм (4.53 x 1.77 x 1.10 инч) |
| Жин | 120 грамм |
| Утасны хөндлөн огтлол | 0.75-2.50 мм² |
8. Баталгаат хугацаа ба дэмжлэг
This Kapego product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
8.1 Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the packaging or the manufacturer's webхолбоо барих мэдээллийг авах сайт.
Үйлдвэрлэгч: Kapego (Deko-Light)
Загвар: 180515
