Cannondale Hollowgram Spider Lockring KP021 Instruction Manual

Танилцуулга

This manual provides essential information for the proper installation and use of the Cannondale Hollowgram Spider Lockring KP021. This component is designed to securely fasten the spider to the crankarm on compatible Cannondale Hollowgram cranksets.

Тохиромжтой байдал

The KP021 lockring is compatible with all Cannondale BB30 Hollowgram cranks.

It is specifically redesigned to fit Cannondale Evo models with press-fit bottom brackets. Previous lockring versions are not compatible with Evo models.

Бүтээгдэхүүн дууссанview

The Cannondale Hollowgram Spider Lockring KP021 is an alloy component critical for securing the crank spider.

Зургийн тайлбар: Ойрын зураг view of the black alloy Cannondale Hollowgram Spider Lockring KP021. The lockring is circular with cutouts for a specialized tool. Engraved text on the lockring reads "SI Hollowgram Lockring MK3 - for PressFit30 - Torque 34ftlbs - 47 Nm - D11", indicating its model, compatibility, and required torque specifications.

Суурилуулах заавар

Proper installation is crucial for the safe and effective operation of your bicycle crankset.

Шаардлагатай багаж хэрэгсэл, материал:

• Cannondale KT012 Lockring Tool (required for installation and removal)
• Loctite (not included, required for secure installation)
• Эргэлтийн эрэг чангалах түлхүүр

Суулгах алхамууд:

1. Ensure all crankset components are clean and free of debris.
2. Apply Loctite to the threads of the lockring as per Loctite manufacturer instructions.
3. Position the spider onto the crankarm.
4. Thread the KP021 lockring onto the crankarm, securing the spider.
5. Use the Cannondale KT012 Lockring Tool with a torque wrench to tighten the lockring to the specified torque.
6. The engraved torque specification on the lockring is 34 фут-фунт (47 Нм). Adhere strictly to this value.
7. Allow the Loctite to cure according to its instructions before riding.

Анхааруулга: Failure to use Loctite and tighten to the correct torque specification can result in component failure, leading to serious injury. If you are unsure about any step, consult a professional bicycle mechanic.

Үйл ажиллагаа

Once correctly installed, the lockring functions passively to secure the crank spider. No further operational steps are required beyond regular cycling use.

Засвар үйлчилгээ

Regular inspection of your crankset components, including the lockring, is recommended.

• Periodically check the lockring for any signs of loosening. If loosening is detected, remove, clean, reapply Loctite, and re-torque to specifications.
• Inspect for any visible damage, cracks, or wear. Replace the lockring if any damage is observed.
• Keep the area around the crankset clean to prevent dirt and grime buildup.

Алдааг олж засварлах

Issue: Crank spider feels loose or has play.

Боломжит шалтгаан: Lockring is not sufficiently tightened or Loctite has failed.

Шийдэл: Remove the lockring, clean threads, reapply Loctite, and re-torque to 34 ft-lbs (47 Nm) using the KT012 tool. If the issue persists, inspect the crankarm and spider for damage.

Issue: Difficulty installing or removing the lockring.

Боломжит шалтгаан: Incorrect tool being used or threads are damaged.

Шийдэл: Ensure you are using the specific Cannondale KT012 Lockring Tool. If threads appear damaged, do not force the component; seek professional assistance.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For information regarding warranty coverage or technical support, please refer to the official Cannondale website or contact an authorized Cannondale dealer. Keep your purchase receipt as proof of purchase.

Онлайн нөөцүүд: www.cannondale.com