1. Танилцуулга
The Generac 6346 30-Amp 125/250-Volt Power Inlet Box is designed for safe and reliable outdoor connection of a portable generator to an indoor transfer switch. This NEMA 3R-rated, corrosion-resistant aluminum enclosure ensures secure power transfer to your home or building during electrical outages.
This power inlet box is compatible with Generac generators equipped with 30-Amp outlets, including models such as GP3250, LP3250, XG4000, XP4000, GP5500, GP6500E, GP7500E, XG6500, XG7000E, XG8000E, XP6500E, and XP8000E. It is also compatible with Generac transfer switches model numbers 6376, 6377, 6378, 6379, and 6382.
Figure 1: Generac 6346 30-Amp Power Inlet Box.
2. Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Цахилгаан цочрол болон галын эрсдэл.
- Installation of this power inlet box must be performed by a qualified, licensed electrician in accordance with all applicable electrical codes and standards.
- Do not attempt installation or wiring if you are not qualified. Improper installation can result in serious injury, death, or property damage.
- Always disconnect all power sources before installing or servicing the power inlet box.
- Ensure the generator is properly grounded before connecting it to the inlet box.
- Never operate a generator indoors or in enclosed spaces. Generators produce carbon monoxide, a colorless, odorless, poisonous gas.
3. Тохиргоо ба суурилуулалт
The Generac 6346 Power Inlet Box is designed for exterior mounting on a house or building. It must be hardwired to an appropriate indoor transfer switch.
3.1. Суурилуулах байршил
- Select an outdoor location that is easily accessible for generator connection but protected from direct impact.
- Ensure the location allows for proper routing of conduit and wiring to the indoor transfer switch.
- The NEMA 3R rating provides protection against rain, sleet, and external ice formation.
3.2. Утас ба холболт
- The inlet box features 1/2-inch and 3/4-inch EMT knockouts for conduit entry.
- Hardwire the inlet box to your transfer switch using appropriate gauge wiring for 30-Amp, 125/250V service.
- Бүх холболтууд нягт, найдвартай байгаа эсэхийг шалгаарай.
Figure 2: Dimensions of the Generac 6346 Power Inlet Box (approximately 6.7 inches in height).
4. Ашиглалтын заавар
Once the Generac 6346 Power Inlet Box is professionally installed and wired to your transfer switch, follow these steps to operate your generator during a power outage:
- Position Generator: Place your portable generator outdoors in a well-ventilated area, away from windows, doors, and vents to prevent carbon monoxide accumulation.
- Цахилгааны утас холбох: Open the spring-loaded flip lid cover on the Generac 6346 Power Inlet Box. Connect a compatible Generac power cord (NEMA L14-30 configuration) from your 7500-Watt maximum generator to the inlet box. Ensure the connection is firm.
- Эхлэх генератор: Follow your generator's manufacturer instructions to start it. Allow the generator to run for a few minutes to stabilize.
- Дамжуулах хүч: Go to your indoor transfer switch and follow its instructions to safely transfer power from the utility to the generator.
- Ачааллыг хянах: Генераторын нэрлэсэн ватаас хэтрүүлж болохгүйtage (7500 Watts maximum for this inlet box).
- Унтраах: When utility power is restored, reverse the transfer switch procedure to switch back to utility power. Then, shut down your generator according to its manual and disconnect the power cord from the inlet box. Close the flip lid cover.
5. Засвар үйлчилгээ
The Generac 6346 Power Inlet Box is constructed from NEMA 3R-rated corrosion-resistant aluminum, designed for durability and minimal maintenance. Regular inspection is recommended to ensure continued safe operation.
- Харааны үзлэг: Periodically inspect the inlet box for any signs of physical damage, corrosion, or loose components.
- Тагны ажиллагаа: Ensure the spring-loaded flip lid cover opens and closes smoothly and seals properly to protect the inlet from weather elements. If the lid mechanism appears faulty, inspect for obstructions or damage.
- Цэвэрлэгээ: Keep the exterior of the box clean from dirt, debris, and insect nests. Use a damp цэвэрлэх зориулалттай даавуу; хатуу химийн бодисоос зайлсхий.
- Мэргэжлийн шалгалт: Consider having a qualified electrician inspect your entire generator connection system periodically, especially after severe weather events.
6. Алдаа засах
This section addresses common issues you might encounter with the Generac 6346 Power Inlet Box. Always ensure the generator itself is functioning correctly before troubleshooting the inlet box.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| No power to transfer switch after generator connection. |
|
|
| Flip lid cover does not close or open smoothly. |
|
|
| Visible damage to the inlet box. |
|
|
7. Техникийн үзүүлэлтүүд
- Загвар: 6346
- Ampарилгах: 30-Amp
- Ботьtage: 125/250 В
- Maximum Generator Wattage: 7500 ватт
- ОБЕГ-ын тохиргоо: L14-30
- Материал: Хөнгөн цагаан
- Дуусах төрөл: Будсан
- Суурилуулалтын төрөл: Screw-In
- Хэмжээ (L x W x H): Ойролцоогоор 5 x 7 x 5 инч
- Барааны жин: Ойролцоогоор 1.6 фунт
- Байгаль орчны үнэлгээ: NEMA 3R (Rain tight)
- Баталгаажуулалт: UL жагсаалтад орсон
- Гарал үүслийн улс: АНУ-д үйлдвэрлэсэн
8. Баталгаат хугацааны мэдээлэл
The Generac 6346 30-Amp 125/250V Aluminum Power Inlet Box is backed by a 2 жилийн хязгаарлагдмал баталгаат хугацаа. This warranty covers defects in materials and workmanship under normal use and service. For full warranty terms and conditions, please refer to the official Generac warranty documentation included with your product or visit the Generac webсайт.
9. Хэрэглэгчийн дэмжлэг
For technical assistance, warranty claims, or to inquire about replacement parts, please contact Generac Customer Service. Ensure you have your product model number (6346) and purchase date available when contacting support.
Ерөнхий албан ёсны Webсайт: www.generac.com
Note: Generac power inlet boxes should be installed by a professional electrician familiar with electrical wiring and code.
