Belimo FSLF24-S US Fire and Smoke Damper Actuator Manual

1. Танилцуулга

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo FSLF24-S US Fire and Smoke Damper Actuator. This device is designed for the reliable control of fire and smoke dampers in ventilation and air conditioning systems, ensuring safety in critical building environments. Please read this manual thoroughly before proceeding with installation or operation.

2. Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА:

• Суурилуулалт, засвар үйлчилгээг зөвхөн мэргэшсэн ажилтнууд хийх ёстой.
• Disconnect all power before installing or servicing the actuator to prevent electric shock.
• Бүх утаснууд нь орон нутгийн болон үндэсний цахилгааны кодуудтай нийцэж байгаа эсэхийг шалгаарай.
• Хөдөлгүүрийг заасан хэмжээнээс хэтрүүлэн ажиллуулж болохгүйtage and environmental limits.
• This actuator is a safety device; ensure it is installed correctly and tested regularly.

3. Багцын агуулга

Савлахдаа бүх эд зүйлс байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу:

• Belimo FSLF24-S US Fire and Smoke DampЭр ажиллуулагч
• Mounting Bracket/Hardware (if applicable)
• Хэрэглэх заавар (энэ баримт бичиг)

4. Техникийн үзүүлэлтүүд

5. Тохиргоо ба суурилуулалт

The Belimo FSLF24-S US actuator is designed for panel mounting and requires careful installation to ensure proper function and safety. Always refer to the specific wiring diagrams provided with the product packaging for detailed electrical connections.

5.1 Хөдөлгүүрийг суурилуулах

1. Ensure the mounting surface is clean, dry, and capable of supporting the actuator's weight.
2. Position the actuator on the damper shaft according to the damper manufacturer's instructions.
3. Secure the actuator using appropriate mounting hardware, ensuring a firm and stable connection.
4. гэдгийг баталгаажуулах damper can move freely without obstruction after mounting.

5.2 Цахилгааны холболтууд

The FSLF24-S US actuator operates on 24 Volts. Electrical connections should only be made by a licensed electrician in accordance with all applicable codes.

• Disconnect power to the circuit before making any connections.
• Connect the 24V power supply to the designated screw terminals on the actuator.
• Бүх холболтууд найдвартай, зөв ​​тусгаарлагдсан эсэхийг шалгаарай.
• Double-check wiring against the provided diagram to prevent damage to the actuator or system.

Зураг 1: Урд view of the Belimo FSLF24-S US Fire and Smoke Damper Actuator, showing its orange casing, control dial, and connection points. This image illustrates the general appearance and key features of the actuator for installation reference.

6. Ашиглалтын заавар

The Belimo FSLF24-S US actuator is designed for automatic operation in conjunction with a fire alarm or building management system. It typically operates in a fail-safe mode, meaning it will drive the damper to a safe position (e.g., closed) upon loss of power.

6.1 Анхдагч асаалт

1. After completing all electrical connections and mounting, restore power to the actuator.
2. Observe the actuator's initial movement. It should drive the damper to its default position (e.g., open or closed, depending on configuration).
3. гэдгийг баталгаажуулах damper moves smoothly and without obstruction.

6.2 Үйл ажиллагааны туршилт

Regular functional testing is crucial for fire and smoke dampers. Consult local fire safety regulations for required testing intervals.

• Initiate a test sequence from your building management system or fire alarm panel to activate the dampэ.
• Confirm that the actuator drives the damper to its intended fire/smoke safety position.
• гэдгийг баталгаажуулах damper returns to its normal operating position once the test signal is removed.

7. Засвар үйлчилгээ

The Belimo FSLF24-S US actuator is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended.

• Жилийн үзлэг: Visually inspect the actuator and its connections for any signs of wear, damage, or corrosion.
• Функциональ шалгалт: Perform a functional test of the damper and actuator as per local regulations (e.g., NFPA 80, NFPA 105).
• Цэвэрлэгээ: Keep the actuator free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Тосолгоо хийх шаардлагагүй: Хөдөлгүүрийг үйлдвэрийн аргаар тосолсон бөгөөд нэмэлт тослох шаардлагагүй.

8. Алдаа засах

If the actuator is not functioning as expected, consult the following table before contacting technical support.

9. Баталгаат хугацаа ба дэмжлэг

Belimo products are manufactured to high standards and typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Belimo webсайт.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Belimo customer support or your authorized Belimo distributor. When contacting support, please have your product model number (FSLF24-S US) and serial number (if applicable) readily available.

Belimo Official Webсайт: www.belimo.com