Hiland HIL-FP-1201 Propane Fire Pit

Танилцуулга

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Hiland HIL-FP-1201 Propane Fire Pit. Please read all instructions carefully before use to ensure proper function and safety.

Image 1: The Hiland HIL-FP-1201 Propane Fire Pit, showcasing its round design and hammered bronze finish.

Аюулгүй байдлын чухал мэдээлэл

• Keep the fire pit clear of combustible materials.
• Use only approved fuel types (Liquefied Petroleum Gas).
• Ашиглалтын явцад агааржуулалтыг сайтар хангах.
• Follow all safety instructions for relocation and storage.
• Check local regulations regarding outdoor fire pit usage before operating this product.

Тохиргоо ба угсралт

Unpack all components and verify against the parts list (not provided in this manual, refer to packaging). Assembly typically involves attaching legs, side panels, and connecting the burner assembly. It is recommended to have two people for assembly due to the size and weight of the unit.

1. Carefully place the main tabletop upside down on a soft, non-abrasive surface to prevent scratches.
2. Attach the leg supports and side panels according to the manufacturer's instructions. Ensure all bolts are securely tightened.
3. Carefully turn the fire pit upright.
4. Place the stainless steel burner into the designated opening in the tabletop.
5. Distribute the provided glass fire beads evenly over the burner area. Do not obstruct the igniter or thermocouple.
6. Connect the propane hose from the burner to a standard 20lb propane tank. Ensure all connections are tight and check for leaks using a soapy water solution before first use.
7. Place the propane tank inside the designated compartment within the fire pit base.

Зураг 2: View of the fire pit with the center cover removed, revealing the clear glass fire beads and the burner assembly.

Ашиглалтын заавар

Always ensure the area around the fire pit is clear of obstructions and flammable materials before ignition.

1. Анхны хэрэглээний өмнө: Perform a leak test on all gas connections. Apply a soapy water solution to connections; bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not operate if a leak is detected.
2. Гал асаахын тулд:
   • Open the valve on your propane tank.
   • Locate the control knob on the fire pit.
   • Push the control knob in and turn it counter-clockwise to the 'IGNITE' position. You should hear a clicking sound from the igniter.
   • Hold the knob in for 10-15 seconds after ignition to allow the thermocouple to heat up and engage the safety valve.
   • If the flame does not ignite, release the knob, wait 5 minutes for gas to dissipate, and repeat the ignition process.
3. Галыг тохируулах: Once ignited, rotate the control knob to adjust the flame height to your desired level.
4. Унтраахын тулд:
   • Turn the control knob clockwise to the 'OFF' position.
   • Пропан савны хавхлагыг хаа.
   • Галын нүхийг хучих эсвэл зөөхөөс өмнө бүрэн хөргөнө.

Image 3: The Hiland fire pit operating with visible flames, providing warmth and ambiance.

Засвар үйлчилгээ

Regular maintenance ensures the longevity and safe operation of your fire pit.

• Цэвэрлэгээ: After the unit has cooled, wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Clean glass fire beads periodically by rinsing with water and allowing them to dry completely before placing back in the fire pit.
• Шатаагчийг шалгах: Annually inspect the burner and gas connections for signs of wear, damage, or blockages. Clear any debris from the burner ports.
• Хадгалах: When not in use for extended periods, disconnect the propane tank and store it in a well-ventilated area outdoors. Cover the fire pit with a weather-resistant cover to protect it from the elements.

Image 4: Clear glass fire beads, a key component for the fire pit's aesthetic and heat distribution.

Алдааг олж засварлах

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the documentation included with your purchase or contact Hiland customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: AZ Patio Heaters LLC