1. Бүтээгдэхүүн дууссанview
This instruction manual provides detailed guidance for the assembly and care of your Tamiya 1/350 Japanese Battleship Yamato Plastic Model Kit. The kit allows you to recreate the massive and imposing silhouette of the Yamato, as it appeared just prior to its final mission. This highly accurate static display model features finely detailed components, including rotating main gun turrets and secondary armament turrets that can be positioned even after assembly.
Image 1: Box art displaying the Tamiya 1/350 Japanese Battleship Yamato Plastic Model Kit. The image shows the battleship in a dynamic pose on the ocean, highlighting its scale and detail.
The kit is designed for experienced model builders due to its complexity and the small, delicate nature of many parts. It offers a rewarding building experience, culminating in a historically accurate display model.
2. Угсрах заавар
Assembly of the Tamiya 1/350 Japanese Battleship Yamato requires careful attention to detail and adherence to the provided instruction booklet. The kit contains over 150 plastic pieces, some of which are very small and fragile. It is recommended to work in a well-lit area with a clean workspace.
2.1 Савлах, эд ангиудыг таних
Carefully unpack all components from the box. Refer to the parts diagram in the instruction manual to identify each sprue and individual part. Ensure all parts are present and undamaged before beginning assembly.
Зураг 2: Ойрын зураг view of the plastic sprues included in the Tamiya Yamato model kit, showcasing the numerous detailed parts ready for assembly.
2.2 Ерөнхий Ассемблейн үе шатууд
- Бэлтгэл: Use a hobby knife or sprue cutters to carefully remove parts from the sprues. Clean any excess plastic (flash) with a hobby knife or fine-grit sandpaper.
- Наалдац: Use plastic cement or appropriate adhesive for model kits. Apply sparingly to avoid damaging the plastic or obscuring details.
- Дэд угсралтууд: Follow the manual to build smaller sections (e.g., turrets, superstructure, hull sections) before combining them into the main model.
- Уран зураг: Painting is required for a complete finish. Refer to the color guide in the instruction manual for recommended Tamiya paint colors. Note that the manual assumes Tamiya brand paints, so cross-referencing may be necessary for other brands.
- Дэлгэрэнгүй: Apply decals as instructed. The main gun turrets and secondary armament turrets are designed to be rotatable after assembly.
Patience is key, especially with small parts like anti-aircraft guns. Ensure proper alignment for the best fit and finish.
3. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | ТАМИЯА |
| Загварын нэр | 1/350 Japanese Battleship Yamato Plastic Model Boat Kit |
| Загварын дугаар | ТАМ78030 |
| Масштаб | 1/350 |
| Материал | Хуванцар |
| Хэсгийн тоо | 150 |
| Санал болгож буй нас | 16 жил ба түүнээс дээш |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 29.58 x 4.03 x 11.96 инч |
| Зүйлийн жин | 2.2 фунт (1 килограмм) |
| Оруулсан бүрэлдэхүүн хэсгүүд | Tamiya 78030 1/350 Japanese Battleship Yamato Plastic Model Boat Kit components, display stand |
4. Аюулгүй байдлын мэдээлэл
This model kit contains small parts and is not suitable for children under 16 years of age. Keep all parts and tools out of reach of young children to prevent choking hazards. Always use hobby tools (knives, cutters) with caution and under adult supervision if applicable. Ensure adequate ventilation when using paints and adhesives.
5. Арчилгаа, засвар үйлчилгээ
Once assembled, your Tamiya Yamato model is a static display piece. To maintain its appearance:
- Цэвэрлэгээ: Dust regularly with a soft, dry brush or a microfiber cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the paint or plastic.
- Дэлгэц: Display the model on a stable surface, away from direct sunlight, extreme temperatures, and high humidity to prevent warping, fading, or damage to adhesives.
- Харьцуулах: Handle the model carefully, especially delicate parts like antennas and small guns, to avoid breakage.
6. Алдаа засах
Most issues during model assembly can be resolved by carefully re-reading the instructions and examining the parts. Common troubleshooting tips include:
- Тохирохгүй хэсгүүд: Ensure parts are correctly oriented and any excess plastic (flash) has been removed. Sometimes, a gentle sanding or trimming is needed for a perfect fit.
- Adhesive issues: Use the correct type of adhesive for plastic models. Ensure surfaces are clean and dry before application. Allow sufficient drying time.
- Алга болсон эсвэл гэмтсэн хэсгүүд: Ховор тохиолдолд эд анги алга болсон эсвэл гэмтсэн тохиолдолд Tamiya-ийн хэрэглэгчийн дэмжлэгтэй холбогдож, хэрэгслийнхээ дэлгэрэнгүй мэдээлэл болон худалдан авалтын баримттай холбогдоно уу.
7. Баталгаат хугацаа ба дэмжлэг
Tamiya products are manufactured to high standards. For any manufacturing defects or issues not covered by the instruction manual, please refer to the warranty information provided with your product packaging or contact Tamiya customer support directly. Keep your proof of purchase for any warranty claims.
