Serta Comfort Ergo Executive Office Chair Instruction Manual

Танилцуулга

Thank you for choosing the Serta Comfort Ergo Executive Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

Аюулгүй байдлын мэдээлэл

• Өгөгдсөн зааврын дагуу сандлыг үргэлж угсарна уу.
• Жингийн дээд хязгаарыг хэтрүүлж болохгүй 275 фунт.
• Be cautious while moving the chair to prevent tipping or instability.
• Ensure all bolts and screws are tightened securely before use. Periodically check and re-tighten as necessary.
• Сандал дээр зогсох эсвэл сандал болгон ашиглахаас зайлсхий.

Багцын агуулга

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Сандлын түшлэг
• Сандал суудал
• Гарын түшлэг (2)
• Оддын суурь
• Кастер (5)
• Хийн өргөх цилиндр
• Механизмын хавтан
• Тоног төхөөрөмжийн багц (эрэг, угаагч, Аллен эрэг чангалах түлхүүр)

Угсрах заавар

Follow these step-by-step instructions for proper assembly. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

Алхам 1: Кастеруудыг сууринд холбоно

Од хэлбэрийн суурийн хөл бүрийн төгсгөлд байгаа нүхэнд таван дугуйг хийгээрэй. Тэдгээрийг байрандаа товших хүртэл чанга дарна уу.

Image: The five-star base with casters inserted into each leg, ready for the gas lift.

Step 2: Insert Gas Lift Cylinder

Place the gas lift cylinder into the center hole of the assembled star base. No tools are required for this step; it will rest in place.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack, tightening with the Allen wrench.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and seat, aligning all holes and securing with screws. Do not fully tighten all screws until all components are loosely attached to allow for adjustment.

Алхам 5: Суудлын угсралтыг хийн өргөгчтэй холбоно уу

Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Apply gentle downward pressure to secure.

Бүтээгдэхүүний онцлог

The Serta Comfort Ergo Executive Office Chair is designed with several features to enhance your comfort and productivity:

• Ergonomic Mid-Back Design: Features subtle contours and lumbar support to promote proper posture.
• Semi-Plush Comfort: Double-layer seat cushion and padded armrests are generously filled with high-density foam.
• Удаан эдэлгээтэй бүрээс: Covered in soft velvet fabric for a luxurious feel.
• Тохируулж болох өндөр: Суудлын өндрийг хүссэн байрлалдаа хялбархан тохируулна уу.
• Tilt Lock Mechanism: Lock the chair in an upright position or allow for rocking motion.
• 360° эргүүлэх: Allows for easy rotation and movement around your workspace.
• Smooth-Rolling Casters: Dual casters designed for easy mobility on various surfaces.

Image: A visual representation of the chair highlighting its key features, including the cushioned headrest, curved back support, padded armrests, foam-filled seat cushion, adjustable comfort, and 360-degree motion.

Зураг: Ойрын зураг view of the chair's headrest, emphasizing the specialized curved cushions for lasting comfort throughout the day.

Зураг: Нарийвчилсан view of the chair's foam-filled seat cushion, illustrating its high-quality foam for comfort and support.

Ашиглалтын заавар

Өндөр тохируулга

To adjust the seat height, lift the lever located on the right side of the chair (when seated) upwards. While holding the lever, either stand up to raise the seat or remain seated to lower it. Release the lever to lock the height in place.

Image: A diagram illustrating the height adjustment mechanism. Lift the lever on the side of the chair to raise or lower the seat.

Хажуугийн тохируулга

To unlock the recline mechanism, pull the same lever (on the right side) outwards. The chair back will now allow for a rocking motion. To lock the chair in an upright position, push the lever inwards. To adjust the tension of the recline, twist the round knob located underneath the seat at the front of the mechanism. Turn clockwise to increase tension (stiffer recline) and counter-clockwise to decrease tension (looser recline).

Image: A diagram showing the recline adjustment lever and the tension adjustment knob located beneath the seat. Pull the lever to unlock recline and twist the knob to adjust tension.

Chair Movement

The chair is equipped with 360° motion casters, allowing for easy movement and rotation around your workspace. Ensure the floor surface is clear of obstructions for smooth gliding.

Зураг: Ойрын зураг view of the chair's dual-wheel casters, illustrating their 360-degree motion capability for easy movement.

Засвар үйлчилгээ, арчилгаа

To maintain the appearance and longevity of your Serta Comfort Ergo Executive Office Chair, follow these care instructions:

• Цэвэрлэгээ: Зөөлөн арчиж арчих, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the velvet fabric.
• Тогтмол шалгалтууд: Periodically inspect all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
• Нарны шууд тусгалаас зайлсхийх: Нарны шууд тусгалд удаан хугацаагаар өртөх нь даавууг бүдгэрүүлэхэд хүргэдэг.
• Жингийн хязгаар: Adhere to the maximum weight recommendation of 275 lbs to prevent structural damage.

Алдааг олж засварлах

If you encounter any issues with your chair, consider the following:

• Сандал чичирч байна: Check all assembly screws and bolts. Ensure they are fully tightened.
• Gas lift not adjusting: Ensure the height adjustment lever is fully engaged or disengaged as required. If the issue persists, the gas lift may need replacement.
• Кастер жигд өнхрөхгүй байна: Check for debris (hair, lint) caught in the caster wheels. Clean as necessary.
• Recline not working: Ensure the recline lock lever is disengaged. Adjust the tension knob if the recline feels too stiff or too loose.

For further assistance, please contact Serta Customer Support.

Үзүүлэлтүүд

Image: A detailed diagram illustrating the product dimensions, including width, depth, back height, inner seat width, chair height, and seat height, along with the 275 lb weight capacity.

Баталгаат болон дэмжлэг

Serta chairs are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or contact Serta customer support.

Хэрэглэгчийн дэмжлэг

Our dedicated U.S. based team is ready to assist you with your Serta chair and any help needed with its assembly or operation.

Image: Serta Customer Service contact information, including a phone number (800) 379 - 9773 and operating hours (6am - 5pm PST).

Утас: (800) 379 - 9773
Цаг: 6am - 5pm PST

Бүтээгдэхүүн дууссанview Видео

Ерөнхий мэдээллийг энэ видеоноос үзнэ үүview of Serta chairs and their design philosophy.