SEIKO SQ767W Digital Alarm Clock User Manual

1. Танилцуулга

Худалдан авалт хийсэнд баярлалааasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

Зураг 1: Урд view of the SEIKO SQ767W Digital Alarm Clock.

2. Бүтээгдэхүүний онцлог

• Хос дохиолол: Хоёр бие даасан сэрүүлгийн цагийг тохируулна уу.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• Дижитал дэлгэц: Clear display of time, date, temperature, and humidity.
• Залгах функц: Temporarily pauses the alarm.
• Гэрэл функц: Illuminates the display for visibility in low light.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• Full Auto Calendar: Displays the correct date automatically.
• Температур/Чийгшлийн дэлгэц: Provides current room temperature and humidity readings.

3. Тохиргоо

3.1 Батерей суурилуулах

1. Цагны ард байрлах зайны тасалгааны тагийг нээнэ үү.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. Зайны тасалгааны тагийг сайтар хаа.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• Цагийг цонхны дэргэд байрлуул.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • Өндөр дууны ойролцооtage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. Ашиглалтын заавар

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

Зураг 3: Буцах view with control buttons.

4.1 Цаг, огноог тохируулах

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• Гарын авлагын тохиргоо: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 Дохиоллын тохиргоо (Дохиоллын 1 ба Дохиоллын 2)

Цаг нь хоёр бие даасан сэрүүлэгтэй.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 Температур ба чийгшлийн дэлгэц

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view эдгээр уншлага.

Figure 4: Close-up of the digital display.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing эсвэл дэлгэц.

5.2 Батерейг солих

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. Алдаа засах

• Clock not displaying time/functions: Батерейны суурилуулалтыг шалгаж, батерей дуусаагүй эсэхийг шалгаарай.
• Цаг буруу байна: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• Сэрүүлэг дуугарахгүй байна: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• Дэлгэц бүдэг байна: Батерейг солих.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.