Танилцуулга
The Hunter NODE600 is a battery-powered irrigation controller designed for isolated sites or areas without AC power. This manual provides detailed instructions for the installation, programming, and maintenance of your NODE600 controller to ensure efficient and reliable operation of your irrigation system.
Бүтээгдэхүүн дууссанview
The NODE600 controller is built with a robust, waterproof exterior, making it suitable for installation within a valve box. It operates on 9V batteries and features an LCD screen for easy programming. The controller supports up to 6 stations, offering flexible scheduling options.
Зураг 1: Hunter NODE Controller Interface. This image displays the front panel of a Hunter NODE controller, showing the LCD screen, programming buttons (PRG, plus, minus, arrow keys, enter), and wiring connections for common (COM) and sensor (SEN) inputs. The screen shows a time of 3:43 PM and battery status.
Тохиргоо ба суурилуулалт
- Батерей суурилуулах: The NODE600 requires one or two 9V alkaline batteries for operation. Open the battery compartment, insert the batteries, ensuring correct polarity, and securely close the compartment.
- Суурилуулалт: The controller is designed to mount directly to a valve's solenoid or within a valve box. Ensure the mounting location is secure and allows for easy access for programming and maintenance.
- Утасны холболтууд:
- Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled 'COM' on the controller.
- Station Wires: Connect each station wire from your valves to the corresponding numbered terminal (1-6) on the controller.
- Sensor Wires (Optional): If using a rain or soil moisture sensor, connect its wires to the terminals labeled 'SEN'. Refer to your sensor's manual for specific wiring instructions.
Ашиглалтын заавар
The NODE600 utilizes standard Hunter controller programming logic, featuring 3 programs (A, B, C) and 4 start times per program.
Basic Programming Steps:
- Одоогийн цаг, өдрийг тохируулах:
- дээр дарна уу PRG цагийн дэлгэц анивчих хүртэл товчийг дарна уу.
- -г ашиглана уу + or - цагийг тохируулахын тулд товчлууруудыг дарна уу, дараа нь arrow right button to move to minutes and adjust.
- дээр дарна уу arrow right button again to set the current day of the week. Use + or - сонгох.
- дарна уу PRG хадгалах, гарах.
- Program Start Times:
- дарна уу PRG until 'START TIME' appears.
- -г ашиглана уу arrow right button to select Program A, B, or C.
- Ашиглах + or - to set the desired start time for the first cycle.
- дарна уу arrow right to move to the next start time (up to 4 per program). Set or leave blank if not needed.
- дарна уу PRG хэмнэх.
- Set Station Run Times:
- дарна уу PRG until 'RUN TIME' appears.
- -г ашиглана уу arrow right button to select the desired station (1-6) and program (A, B, or C).
- Ашиглах + or - to set the run time in minutes for that station.
- Repeat for all active stations in each program.
- дарна уу PRG хэмнэх.
- Услах өдрүүдийг тохируулах:
- дарна уу PRG until 'WATER DAYS' appears.
- -г ашиглана уу arrow right button to select Program A, B, or C.
- Choose your watering schedule: specific days of the week (MO, TU, WE, TH, FR, SA, SU), Odd/Even days, or Interval watering. Use + or - to select and the arrow right button to confirm or move between options.
- дарна уу PRG хэмнэх.
For detailed programming sequences, refer to the official Hunter Industries support resources or video tutorials, as the interface can require careful navigation.
Засвар үйлчилгээ
- Зай солих: Replace 9V batteries annually or when the low battery indicator appears on the LCD screen. Use high-quality alkaline batteries for optimal performance.
- Байгаль орчныг хамгаалах: While the NODE600 has a waterproof exterior, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions and physical damage.
- Цэвэрлэгээ: Periodically clean the exterior of the controller with a damp Шороо, хог хаягдлыг арилгахын тулд даавуугаар арчина. Хүчтэй химийн бодис бүү хэрэглээрэй.
Алдааг олж засварлах
- Хянагч асахгүй байна: Батерейны суурилуулалтыг шалгаж, батерейнууд шинэ байгаа эсэхийг шалгана уу. Шаардлагатай бол солино уу.
- Усны урсгал байхгүй:
- Verify that the main water supply is on.
- Check wiring connections to valves and the common wire.
- Ensure run times and start times are correctly programmed.
- If a sensor is connected, check its status; it might be preventing watering.
- Програмчлалын хүндрэлүүд: The programming interface can be complex. Refer to the detailed programming steps in this manual or consult Hunter's official support resources for visual guides and further assistance.
- Тогтворгүй ажиллагаа: Ensure batteries are not low. Check for loose wiring connections.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | Зангилаа 600 |
| Бүтээгдэхүүний хэмжээс | 5 x 7 x 10 инч |
| Зүйлийн жин | 1.2 фунт |
| Эрчим хүчний эх үүсвэр | One or two 9V batteries |
| Станцуудын тоо | 6 |
Баталгаат хугацааны мэдээлэл
Hunter Industries typically offers a warranty on its products. For specific warranty terms and conditions applicable to your NODE600 controller, please refer to the official documentation provided with your purchase or visit the Hunter Industries website. Warranty periods may be based on the product's manufacturing date code.
Хэрэглэгчийн дэмжлэг
For further assistance, technical support, or detailed programming guidance, please contact Hunter Industries customer support. A reported support number is 1-800-733-2833, available from 6 AM to 4 PM Pacific Time. It is recommended to verify current contact information on the official Hunter Industries webсайт.
