Bogen BG-NR100

BOGEN BG-NR100 Night Ringer Instruction Manual

Model: BG-NR100 | Brand: Bogen

1. Танилцуулга

1.1 Бүтээгдэхүүн дууссанview

Bogen BG-NR100 Night Ringer device with connection terminals
The Bogen BG-NR100 Night Ringer is a compact device designed to provide an audible ring signal for paging systems. It responds to standard 90V telephone ring signals or external contact closures, producing a distinct dual-frequency electronic ringer tone. This unit is ideal for environments where telephone ring signals need to be amplified or integrated into a public address system, automatically muting background music during a ring event.

The Bogen BG-NR100 Night Ringer is an essential component for integrating telephone ringing into a paging or public address system. It is engineered to detect incoming telephone ring signals or external contact closures and generate a loud, clear electronic ringer tone. Its compact design and low current draw make it an efficient and reliable solution for various commercial and industrial applications.

1.2 Гол онцлогууд

2. Аюулгүй байдлын мэдээлэл

Please read all safety instructions carefully before installing or operating the Bogen BG-NR100 Night Ringer. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2.1 Аюулгүй байдлын ерөнхий арга хэмжээ

2.2 Цахилгааны аюулгүй байдал

3. Тохиргоо

3.1 Савлах

Carefully remove the Night Ringer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your supplier immediately.

3.2 Суурилуулалт

The BG-NR100 is designed for surface mounting. Use appropriate screws (not supplied) to secure the unit to a wall or other stable surface using the mounting tabs on either side of the enclosure. Ensure the mounting location allows for adequate ventilation and access to connections.

3.3 утас холболт

All connections are made via the screw terminal block located on the front of the unit. Ensure power is disconnected before making any wiring connections.

Терминал шошгоТодорхойлолтЧиг үүрэг
TEL RING (T, R)Telephone Ring InputConnect to the tip (T) and ring (R) lines of a standard 90V telephone ring signal source.
CONTACT RING (A, B)External Contact Closure InputConnect to a dry contact closure (e.g., from a relay or switch) to trigger the ringer.
POWER SUPPLY (+24, -24)Эрчим хүчний оролтConnect to a regulated 24V DC power supply. Observe polarity (+24V to +24, -24V to -24).
BGM SOURCE (A, B)Арын хөгжим оруулахConnect the background music source here. The unit will mute this input during a ring event.
AMP INPUT (A, B)Amplifier Input / Output to Paging SystemConnect this output to the input of your paging amplifier or public address system. This carries the ringer tone and the muted BGM.

4. Ажиллаж байгаа

4.1 Үндсэн үйл ажиллагаа

Once properly connected and powered, the BG-NR100 will automatically detect an incoming 90V telephone ring signal or a closure on the Contact Ring terminals. Upon detection, the unit will generate a dual-frequency electronic ringer tone and simultaneously mute any background music connected to the BGM Source input. The ringer tone will be sent to the Amp Input terminals for connection to your paging system.

4.2 Дууны хяналт

The ringer volume can be adjusted using the TONE VOL knob located on the top left of the unit. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust the volume to a suitable level for your environment.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

To clean the unit, wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Ensure the unit is powered off and disconnected from all sources before cleaning.

5.2 Ерөнхий арчилгаа

The BG-NR100 is designed for reliable operation and requires minimal maintenance. Ensure it is installed in a location free from excessive dust, moisture, and extreme temperatures. Periodically check all wiring connections to ensure they are secure.

6. Алдаа засах

If you experience issues with your Bogen BG-NR100 Night Ringer, refer to the following table for common problems and solutions.

АсуудалБоломжит шалтгаанШийдэл
No ringer tone output.Төхөөрөмжид цахилгаан байхгүй байна.Check power supply connections and ensure 24V DC is present.
Incorrect or no input signal (TEL RING or CONTACT RING).Verify 90V ring signal on TEL RING or proper contact closure on CONTACT RING.
Дууны түвшний товчлуур хэт бага тохируулагдсан.Adjust the TONE VOL knob clockwise.
Ringer tone is distorted or weak.Improper connection to paging ampнастан.Баталгаажуулах AMP INPUT is correctly connected to the amplifier input. Check ampөргөгчийн тохиргоо.
Background music does not mute.BGM SOURCE not connected correctly.Verify BGM SOURCE connections. Ensure the music source is routed through the Night Ringer.

If the problem persists after attempting these solutions, please contact Bogen technical support or a qualified service technician.

7. Техникийн үзүүлэлтүүд

Technical specifications for the Bogen BG-NR100 Night Ringer:

АтрибутҮнэ цэнэ
ҮйлдвэрлэгчБОГЕН
БрэндБоген
Загварын дугаарBG-NR100
Зүйлийн жин1 фунт
Бүтээгдэхүүний хэмжээс1 x 5 x 3 инч
FCC Registration NumberCD23CH-17566-KX-N
Хонхны дууны тэнцэл1.1 Б
Эхний боломжтой огноо27 оны арваннэгдүгээр сарын 2013

8. Баталгаат хугацаа ба дэмжлэг

8.1 Баталгаат хугацааны мэдээлэл

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website. Bogen Communications, Inc. typically provides a limited warranty against defects in materials and workmanship for a specified period from the date of purchase.

8.2 Техникийн дэмжлэг

If you require technical assistance or have questions regarding the installation or operation of your BG-NR100 Night Ringer, please contact Bogen technical support. Contact information can usually be found on the Bogen webсайт эсвэл бүтээгдэхүүний савлагаанд .

Холбогдох баримт бичиг - BG-NR100

Урьдчилсанview Bogen NQ-E7010 Nyquist Оролт/Гаралтын Хянагчийн Тохиргооны Гарын Авлага
Энэхүү гарын авлагад Bogen NQ-E7010 Nyquist Оролт/Гаралтын Хянагчийг тохируулах талаар дэлгэрэнгүй зааварчилгаа өгсөн болно. Сүлжээний тохиргоог удирдах, програм хангамжийг шинэчлэх, бүртгэлд хандах, Bogen Дижитал Гэрчилгээжүүлэх Байгууллагаас аюулгүй нэвтрэхийг баталгаажуулахыг сур.
Урьдчилсанview Bogen MCP35A Мастер хяналтын самбар: Суулгах, ашиглах гарын авлага
Энэхүү гарын авлага нь янз бүрийн орчинд хоёр талын харилцаа холбоо, програм түгээх олон талт систем болох Bogen MCP35A Мастер Удирдлагын Самбарын суурилуулалт, ашиглалт, техникийн үзүүлэлтүүдийг нарийвчлан тусгасан болно.
Урьдчилсанview Боген ACD2X2 AmpТаазны чанга яригч суурилуулах гарын авлага, баталгаат хугацаа
Bogen ACD2X2-ийн суулгах заавар, холболтын дэлгэрэнгүй мэдээлэл, баталгаат мэдээлэл ampлифттэй таазны чанга яригч. Цахилгааны холболт, 2х2 ба 2х4 хавтангийн таазны бэхэлгээ, бүтээгдэхүүний техникийн үзүүлэлтүүдийг хамарна.
Урьдчилсанview Bogen Nyquist VoIP Интерком Модулийн Тохиргооны Гарын Авлага (NQ-GA10P, NQ-GA10PV)
Bogen-ийн Nyquist NQ-GA10P болон NQ-GA10PV VoIP Интерком модулиудын дэлгэрэнгүй тохиргооны гарын авлага. IP хуудасжуулалт болон аудио түгээлтийн системүүдийн тохиргоо, сүлжээний тохиргоо, програм хангамжийн шинэчлэлт, бие даасан ажиллагааг хамарна.
Урьдчилсанview Bogen AS1, ASUG1(DK), ASWG1(DK) AmpТаазны чанга яригч суурилуулах, ашиглах гарын авлага
Bogen-ийн AS1, ASUG1(DK), ASWG1(DK) өөрөө суурилуулах, ашиглах гарын авлагаamp8 инчийн конус хэлбэрийн таазны чанга яригч. Бүтээгдэхүүний тодорхойлолт, TB8 ба RE84 хайрцагны суурилуулах заавар, цахилгааны холболт, тохируулга, хязгаарлагдмал баталгаат мэдээллийг багтаасан болно.
Урьдчилсанview Bogen NQ-GA20P2 Nyquist нэгдсэн цахилгаан Ampөргөгчийг тохируулах гарын авлага
Bogen NQ-GA20P2 Nyquist 20 ваттын нэгдсэн тэжээлийн тохиргооны гарын авлага ampөргөгч, тохиргоо, сүлжээний тохиргоо, програм хангамжийн шинэчлэлтүүд болон DSP параметрийн тохируулгыг хамарна.