Trust ACM-1000

Trust ACM-1000 утасгүй суурилуулсан унтраалга хэрэглэгчийн гарын авлага

Model: ACM-1000 (Manufacturer ID: 71015)

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your Trust ACM-1000 Wireless Built-in Switch. Please read this manual carefully before installation and use to ensure safe and correct operation. Keep this manual for future reference.

The Trust ACM-1000 is designed to wirelessly control lights or other electrical devices up to 1000W. Its compact design allows for discreet installation in various locations.

2. Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main fuse box before performing any electrical work.

3. Бүтээгдэхүүн дууссанview

The Trust ACM-1000 is a compact wireless receiver designed to be integrated into your existing electrical system.

Trust ACM-1000 Wireless Built-in Switch, front view

Зураг 1: Урд view of the Trust ACM-1000 Wireless Built-in Switch. This image shows the compact, white casing of the switch, with visible wiring terminals at the bottom, a fuse compartment, and an indicator light. The overall design is circular with flat sides for mounting.

3.1 Бүрэлдэхүүн хэсэг

Trust ACM-1000 Wireless Built-in Switch, wiring terminals

Зураг 2: Ойролцоогоор view of the wiring terminals on the Trust ACM-1000. Labels for Live (L), Neutral (N), Input (IN), and Output (OUT) connections are clearly visible, indicating where electrical wires should be connected for power and load control.

Trust ACM-1000 Wireless Built-in Switch, top view with fuse

Зураг 3: Топ view of the Trust ACM-1000, highlighting the fuse compartment labeled "T5A H250V" and the small indicator light. This view also shows the mounting tabs on the sides of the device.

Trust ACM-1000 Wireless Built-in Switch, side view

Зураг 4: Хажуу тал view of the Trust ACM-1000, showing its slim profile and mounting clips. This view emphasizes the compact nature of the device, suitable for discreet installations.

4. Тохиргоо ба суурилуулалт

Before starting, ensure you have all necessary tools and that the power supply is disconnected.

4.1 Wiring the ACM-1000

  1. Цахилгааныг салгах: Turn off the main power supply at your circuit breaker. Verify with a voltage шалгагч.
  2. Утас бэлтгэх: Strip approximately 8-10mm of insulation from the Live (L), Neutral (N), and load wires (IN/OUT).
  3. Цахилгаан оролтыг холбох:
    • Connect the main Live wire to the terminal marked L.
    • Connect the main Neutral wire to one of the terminals marked N.
  4. Connect Load Output:
    • Connect the Neutral wire of your light/device to the other terminal marked N.
    • Connect the Live wire of your light/device to the terminal marked ГАРСАН.
    • If using an existing switch, connect the switched Live wire from the switch to the terminal marked IN.
  5. Аюулгүй суурилуулалт: Place the ACM-1000 in a suitable location such as a ceiling rose, junction box, or cabinet. Ensure it is securely mounted and wires are properly insulated.

Note: For outdoor use, the ACM-1000 must be installed inside an IP44-rated waterproof junction box to protect it from environmental elements.

4.2 Дамжуулагчтай хослуулах

The ACM-1000 needs to be paired with a Trust Smart Home transmitter (e.g., remote control, wall switch, motion sensor) to function wirelessly.

  1. Эрчим хүчийг сэргээх: Turn on the main power supply. The indicator light on the ACM-1000 should illuminate briefly.
  2. Хослуулах горимыг оруулна уу: Press the small pairing button on the ACM-1000 once. The indicator light will start flashing slowly.
  3. Дамжуулагчийг идэвхжүүлэх: Within 10 seconds, press the 'ON' button (or the desired channel button) on your Trust Smart Home transmitter.
  4. Баталгаажуулалт: The indicator light on the ACM-1000 will flash rapidly a few times and then turn off, indicating successful pairing.
  5. Туршилт: Use the transmitter to switch the connected device ON and OFF.

To pair additional transmitters, repeat steps 2-4. The ACM-1000 can store up to 6 different pairing codes.

4.3 Deleting Pairing Codes

To delete a single pairing code or all stored codes:

5. Ашиглалтын заавар

Once installed and paired, the Trust ACM-1000 operates seamlessly with your Trust Smart Home transmitter.

6. Засвар үйлчилгээ

7. Алдаа засах

АсуудалБоломжит шалтгаанШийдэл
Device does not respond to transmitter.
  • Зөв хослуулаагүй.
  • Transmitter battery low/dead.
  • Хязгаараас гарсан.
  • Power to ACM-1000 is off.
  • Re-pair the ACM-1000 with the transmitter (see Section 4.2).
  • Дамжуулагчийн батерейг солих.
  • Move transmitter closer to the ACM-1000.
  • Check power supply to the ACM-1000.
Connected light/device does not turn on.
  • Blown fuse in ACM-1000.
  • Буруу утас.
  • Төхөөрөмж өөрөө алдаатай байна.
  • Exceeded maximum load.
  • Disconnect power and replace fuse (T5A H250V).
  • Disconnect power and check wiring connections (see Section 4.1).
  • Test the connected device directly.
  • Нийт ватыг баталгаажуулна ууtage нь 1000 Вт-аас хэтрэхгүй.
Заагч гэрэл асахгүй байна.
  • No power to the ACM-1000.
  • Алдаатай нэгж.
  • Check main power supply and wiring.
  • Хэрэглэгчийн дэмжлэгтэй холбоо барина уу.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

Trust products are manufactured to high quality standards. In the unlikely event of a defect during the warranty period, please contact your retailer or the Trust customer support for assistance. Please retain your proof of purchase.

For the latest information, FAQs, and support, please visit the official Trust website or refer to the product page where you purchased the item.

Холбогдох баримт бичиг - МУЗ-1000

Урьдчилсанview Trust ACM-2000 суурилуулсан унтраалгын хэрэглэгчийн гарын авлага
Trust ACM-2000 суурилуулсан унтраалгын дэлгэрэнгүй хэрэглэгчийн гарын авлага, суурилуулалт, ажиллагаа болон аюулгүй байдлын удирдамжийг нарийвчлан харуулсан болно. Энэхүү олон хэл дээрх гарын авлагад ухаалаг гэрийн интеграцийн талаарх дэлгэрэнгүй зааварчилгаа багтсан болно.
Урьдчилсанview Trust ACM-2000 Build-in Switch хэрэглэгчийн гарын авлага
User manual for the Trust ACM-2000 Build-In Switch, detailing installation, operation, and smart home integration. Learn how to control your lighting wirelessly with Trust Smart Home technology.
Урьдчилсанview ACM-3500-3 3-in-1 суурилуулсан унтраалгын хэрэглэгчийн гарын авлагад итгэх
User manual for the Trust ACM-3500-3 3-in-1 build-in smart home receiver switch. Includes installation, operation, code management, and safety instructions.
Урьдчилсанview ACM-3500-3 3-in-1 суурилуулсан унтраалгын хэрэглэгчийн гарын авлагад итгэх
Trust ACM-3500-3 3-in-1 угсралтын унтраалгын хэрэглэгчийн гарын авлага бөгөөд утасгүй гэрийн автоматжуулалтын суурилуулалт, ажиллагаа болон аюулгүй байдлын зааврыг агуулсан болно.
Урьдчилсанview Trust Fyda утастай тав тухтай хулгана хэрэглэгчийн гарын авлага
Trust Fyda эвтэйхэн утсан хулганын хэрэглэгчийн гарын авлага нь тохиргоо, холболт, үндсэн ажиллагааг оновчтойгоор тайлбарласан болно.
Урьдчилсанview Mydo Wireless Silent Click хулганы хэрэглэгчийн гарын авлагад итгэ
Trust Mydo Wireless Silent Click mouse-ийн тохиргоо, онцлог, дэмжлэгийг багтаасан хэрэглэгчийн дэлгэрэнгүй гарын авлага. Үр дүнтэй тооцоолохын тулд чимээгүй хулганаа хэрхэн холбож, ашиглах талаар суралцаарай.