RICOO Electric Swivel TV Wall Mount SE2544 User Manual

1. Танилцуулга

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your RICOO Electric Swivel TV Wall Mount, Model SE2544. This mount is designed to securely hold televisions with screen diagonals from 32 to 65 inches, weighing up to 45 kg, and compatible with VESA standards up to 400 x 400 mm.

Суулгахаасаа өмнө энэ гарын авлагыг сайтар уншиж, цаашид лавлах зорилгоор хадгална уу.

2. Аюулгүй байдлын мэдээлэл

• Ensure the wall structure can support the combined weight of the mount and your television. Consult a professional if unsure.
• Хамгийн их жингийн багтаамж 45 кг (99 фунт) -аас хэтрэхгүй.
• Verify your TV's VESA mounting pattern is compatible with the mount (up to 400x400mm).
• Use appropriate tools and follow all installation steps carefully to prevent injury or damage.
• Хүүхэд, тэжээвэр амьтдыг суурилуулах газраас хол байлга.
• Ensure all cables are properly routed and secured to prevent pinching or damage during movement.
• Only use the provided remote control for operating the electric swivel function.

3. Багцын агуулга

Before beginning installation, please verify that all components are present and undamaged. If any parts are missing or damaged, contact RICOO customer support.

• Electric Swivel TV Wall Mount Assembly
• Алсын удирдлага
• Эрчим хүчний адаптер
• Mounting Hardware Kit (screws, anchors, washers for wall and TV attachment)
• Хэрэглэх заавар (энэ баримт бичиг)

Image 1: Main components of the RICOO Electric Swivel TV Wall Mount SE2544, including the motorized arm, TV bracket, power adapter, and remote control.

4. Тохиргоо ба суурилуулалт

Careful installation is crucial for the safety and functionality of your TV mount. It is recommended to have two people for installation.

4.1 Суурилуулалтын өмнөх шалгалт

• Ханын төрөл: Ensure your wall can support the weight. For concrete or brick walls, use appropriate anchors. For wood stud walls, locate studs accurately.
• ТВ-ийн нийцтэй байдал: Check your TV's VESA pattern (distance between mounting holes on the back of the TV) and weight. This mount supports VESA patterns up to 400x400mm and TVs up to 45 kg.
• Шаардлагатай хэрэгслүүд: Drill, stud finder, level, screwdriver, measuring tape, pencil.

4.2 Ханын хавтанг суурилуулах

1. Determine the desired height for your TV. Mark the drilling points on the wall using the wall plate as a template.
2. Drill pilot holes at the marked locations. Ensure the holes are level.
3. Attach the wall plate securely to the wall using the provided screws and anchors suitable for your wall type.

4.3 Attaching the TV Brackets to the Television

1. Зурагтаа зөөлөн, цэвэрхэн гадаргуу дээр доош харуулан болгоомжтой байрлуул.
2. Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure they are securely fastened.

Image 2: Illustration of attaching the TV to the wall mount, showing the TV brackets connected to the television and then hooked onto the main mount arm.

4.4 Hanging the TV on the Mount

1. With assistance, carefully lift the television and hook the attached TV brackets onto the horizontal arms of the wall mount.
2. ТВ-г өгөгдсөн аюулгүйн эрэг эсвэл түгжих механизмыг ашиглан угсралтад бэхлээрэй.

4.5 Connecting Power and Cable Management

1. Connect the power adapter to the mount and plug it into a power outlet.
2. Route all TV and power cables neatly along the mount arms using the integrated cable management clips or ties. Ensure cables have enough slack for movement and are not pinched.

Image 3: Demonstrates the maximum weight capacity of 40kg (note: product description states 45kg, using the image's 40kg for consistency with visual) and highlights the integrated cable management feature on the mount arm.

5. Ашиглалтын заавар

The RICOO SE2544 mount features an electric swivel function controlled by the included remote.

5.1 Алсын удирдлагын функцууд

• ДЭЭШ/ДООШ сумнууд: Adjust the vertical tilt of the TV (if applicable, typically +/- 1.5 degrees).
• ЗҮҮН/БАРУУН СУМ: Swivel the TV horizontally (up to 90 degrees in each direction).
• OK товчлуур: Confirms selections or stops movement.
• SET товчлуур: Used for programming memory positions.
• MEM1 / MEM2 Buttons: Recall pre-programmed viewбайрлалууд.

Зураг 4: Дууслааview of the remote control and the mount's movement capabilities, including 90-degree swivel, +/- 1.5-degree tilt, VESA compatibility, and supported screen sizes (40-65 inches).

Image 5: A top-down perspective illustrating the wide swivel range of the TV mount, allowing the screen to be angled for optimal viewӨрөөн доторх янз бүрийн байрлалаас.

5.2 Programming Memory Positions

1. Adjust the TV to your desired viewing position using the arrow buttons.
2. дээр дарна уу SET button once. The indicator light on the remote may flash.
3. Within a few seconds, press either MEM1 or MEM2 to save the current position. The indicator light will confirm successful programming.
4. To recall a saved position, simply press MEM1 or MEM2.

6. Засвар үйлчилгээ

• Цэвэрлэгээ: Холбогчийг зөөлөн, хуурай даавуугаар арчина. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Тогтмол шалгалт: Regularly inspect all screws and connections to ensure they remain tight and secure.
• Кабелийн үзлэг: Periodically check cables for any signs of wear, fraying, or pinching, especially after moving the TV.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

Image 6: Detailed technical drawing showing the dimensions and movement ranges of the RICOO Electric Swivel TV Wall Mount SE2544 in millimeters.

9. Баталгаат хугацаа ба дэмжлэг

RICOO is a registered German trademark committed to quality and safety. For warranty information, technical support, or assistance with missing/damaged parts, please contact RICOO customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.