Танилцуулга
The Maximum IRB-100 IR Bender, Model 1262, is an infrared (IR) remote control extender designed to allow you to control up to three IR-controlled devices that are out of sight or located in a cabinet. It receives IR signals from your remote control and re-transmits them via three included IR emitting probes to your target devices. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Тохиргоо
Багцын агуулга
- 1 x Maximum IRB-100 IR Bender Main Unit
- 3 x IR Emitting Probes
- 1 x AC Adapter (230V)
- 1 x Mounting Set
Эрчим хүчний холболт
The IRB-100 can be powered using either the included 230V AC adapter or a 5V USB power source. Connect the appropriate power cable to the power input port on the main unit. Ensure the power source is stable and provides the correct voltage.
Connecting IR Emitting Probes
Connect each of the three IR emitting probes to the designated output ports on the IRB-100 main unit. These probes will transmit the IR signals to your devices. Each probe has a 2-meter cable length for flexible placement.
Байршил, суурилуулалт
Position the IRB-100 main unit in a location where it can easily receive IR signals from your remote control. The unit features LED indicators to confirm signal reception. Place the IR emitting probes directly over the IR receiver window of each device you wish to control. The included mounting set can be used to secure the main unit or probes if desired, ensuring optimal signal transmission and reception.
This image shows the Maximum IRB-100 IR Bender main unit, demonstrating the connection points for the power supply and the three IR emitting probes. The compact design allows for discreet placement near your entertainment system.
Ашиглалтын заавар
Үндсэн үйл ажиллагаа
Once the IRB-100 is powered on and the IR emitting probes are correctly positioned, simply point your remote control at the main unit. The IRB-100 will receive the IR signal and instantly re-transmit it through the connected probes to control your hidden devices. The system supports controlling up to three devices simultaneously.
LED үзүүлэлтүүд
The IRB-100 unit is equipped with LED indicators. These LEDs illuminate to confirm that the unit is powered on and actively receiving IR signals from your remote control. If the LEDs do not light up when a remote signal is sent, refer to the Troubleshooting section.
Хүрээ ба гүйцэтгэл
The IRB-100 offers a maximum reception range of 5 meters (approximately 16 feet) for your remote control. It operates within a working frequency of 433.92MHz and an IR frequency range of 30-60kHz, ensuring compatibility with a wide array of standard IR remote controls.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Maximum IRB-100 IR Bender, follow these simple maintenance guidelines:
- Цэвэрлэгээ: Use a soft, dry cloth to clean the main unit and probes. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the device.
- Хадгалах: Удаан хугацаагаар ашиглаагүй тохиолдолд төхөөрөмжийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Харьцуулах: Handle the unit and probes with care. Avoid dropping or subjecting them to strong impacts.
Алдааг олж засварлах
If you encounter issues with your IRB-100 IR Bender, please consult the following troubleshooting steps:
Хүч чадалгүй
- Цахилгааны холболтыг шалгах: Ensure the AC adapter or USB power cable is securely connected to the IRB-100 and the power outlet/USB port.
- Эрчим хүчний эх үүсвэрийг баталгаажуулах: Confirm that the power outlet or USB port is functional. Try plugging in another device to test it.
- Кабелийг шалгах: Check the power cable for any visible damage.
Төхөөрөмжүүд хариу өгөхгүй байна
- Шинжилгээний байршил: Ensure each IR emitting probe is positioned directly over the IR receiver window of the target device. Slight adjustments may be necessary.
- IR Bender Reception: Confirm that the IRB-100 main unit is receiving signals from your remote control (check LED indicators). Ensure there are no obstructions between your remote and the main unit.
- Алсын удирдлагын функц: Test your remote control with the device directly to ensure it is working correctly.
- Төхөөрөмжийн тоо: The unit supports up to 3 devices. Ensure you are not attempting to control more than this.
Хязгаарлагдмал хүрээ
- Саад бэрхшээл: Ensure there is a clear line of sight between your remote control and the IRB-100 main unit.
- хөндлөнгийн оролцоо: Minimize potential sources of IR interference, such as direct sunlight or strong fluorescent lighting, near the main unit.
Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 1262 |
| Брэнд | Хамгийн их |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 0.79 x 3.94 x 1.77 инч (20 x 100 x 45 мм) |
| Зүйлийн жин | 6.4 унц (180 гр) |
| Эрчим хүчний хангамж | AC 230V, DC 5V (USB) |
| АС адаптер орсон | Тиймээ |
| Maximum IR Reception Range | 5 метр |
| USB 2.0 портын тоо | 1 (for power) |
| Бүтээгдэхүүний өнгө | Хар |
| Ажлын давтамж | 433.92 МГц |
| LED үзүүлэлтүүд | Тиймээ |
| Интерфэйс | Wireless IR |
| Mounting Set Included | Тиймээ |
| Cable Length (Probes) | 2 метр |
| Дэмжигдсэн төхөөрөмжүүдийн тоо | 3 |
| Баригдсан дэлгэц | Үгүй |
| Frequency Range (IR) | 30-60 кГц |
| Тохиромжтой төхөөрөмжүүд | IR-controlled devices |
Баталгаат хугацааны мэдээлэл
For detailed warranty terms and conditions, please refer to the official website of Maximum or the product packaging. It is recommended to retain your proof of purchase for any potential warranty claims.
Хэрэглэгчийн дэмжлэг
Should you require technical assistance, have questions regarding setup or operation, or need further support, please contact Maximum customer support. Contact details, including phone numbers and email addresses, can typically be found on the manufacturer's official webсайт эсвэл бүтээгдэхүүний баримт бичигт.
