Flysky FS-GR3E 3-Channel 2.4GHz Receiver User Manual

Танилцуулга

The Flysky FS-GR3E is a reliable 3-channel 2.4GHz receiver designed for use with RC cars and boats. It utilizes Flysky's Automatic Frequency Hopping Digital System (AFHDS) technology to provide a stable and interference-free connection. This receiver is compatible with various Flysky transmitters, including the FS-GT2, FS-GT2B, FS-GT3B, and FS-GT3C. This manual provides essential information for the proper setup, operation, and maintenance of your FS-GR3E receiver.

Зураг: The Flysky FS-GR3E 3-Channel 2.4GHz Receiver. This image displays the compact black receiver unit with its antenna wire and various ports for connection to servos, ESC, and power.

Аюулгүй байдлын мэдээлэл

Please read and understand the following safety guidelines before operating your receiver:

• Ensure correct polarity when connecting power to the receiver. Incorrect connections can cause damage.
• RC загвараа хүмүүс, тээврийн хэрэгсэл, саад бэрхшээлээс хол, задгай талбайд ажиллуул.
• Avoid exposing the receiver to moisture, extreme temperatures, or direct sunlight for extended periods.
• Always turn on your transmitter first, then the receiver. When powering off, turn off the receiver first, then the transmitter.
• Regularly inspect all wiring and connections for damage or loose contacts.

Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• 1 x Flysky FS-GR3E 2.4GHz 3-Channel Receiver

Үзүүлэлтүүд

Тохиргоо

1. Суурилуулалт

Mount the FS-GR3E receiver securely in your RC model, ensuring it is protected from vibrations and moisture. Position the antenna wire as straight as possible and away from metal parts or carbon fiber chassis to maximize range and signal quality. Connect your Electronic Speed Controller (ESC) to Channel 2 (throttle), and your steering servo to Channel 1. If using a third channel for auxiliary functions, connect it to Channel 3.

2. Binding the Receiver to the Transmitter

The receiver must be bound to your Flysky transmitter before use. Follow these steps:

1. Таны дамжуулагч унтарсан эсэхийг шалгаарай.
2. Insert the bind plug (usually included with your transmitter or receiver) into the "BIND" port (Channel 3) on the FS-GR3E receiver.
3. Connect power to the receiver (e.g., via the ESC or a separate battery pack connected to the VCC port). The receiver's LED should start flashing rapidly, indicating it is in binding mode.
4. While holding the bind button on your transmitter (or following its specific binding procedure), power on the transmitter.
5. The receiver's LED should stop flashing and become solid, indicating a successful bind.
6. Turn off the receiver, then turn off the transmitter.
7. Хүлээн авагчаас холбох залгуурыг салга.
8. Power on the transmitter first, then the receiver. Verify that the receiver's LED is solid and that the controls respond correctly.

Note: If binding fails, repeat the steps. Some transmitters may have slightly different binding procedures; refer to your transmitter's manual for specific instructions.

Ажиллаж байна

1. Алдаанаас хамгаалах функц

The FS-GR3E receiver features a failsafe function on Channel 2 (throttle) to prevent runaway models in case of signal loss. To set the failsafe position:

1. Ensure the receiver is bound to the transmitter and both are powered on.
2. Position the throttle stick on your transmitter to the desired failsafe position (e.g., neutral or brake).
3. Locate the small failsafe button on the receiver. Press and hold this button until the receiver's LED blinks once, then release.
4. The failsafe position is now set. To test, power on the transmitter and receiver, then turn off the transmitter. The throttle should move to the set failsafe position.

It is recommended to set the failsafe to a neutral or brake position for safety.

2. Channel Assignment

The FS-GR3E receiver has 3 channels. Standard assignments are:

• 1-р суваг: Steering (for RC cars/boats)
• 2-р суваг: Throttle (for RC cars/boats)
• 3-р суваг: Auxiliary function (e.g., lights, gear shift, or used as Bind port)

Засвар үйлчилгээ

To ensure the longevity and optimal performance of your FS-GR3E receiver, follow these maintenance tips:

• Keep the receiver clean and free from dust, dirt, and debris. Use a soft, dry brush or compressed air for cleaning.
• Avoid exposing the receiver to water or excessive humidity. If it gets wet, disconnect power immediately and allow it to dry completely before re-use.
• Хүлээн авагчийг ашиглаагүй үед сэрүүн, хуурай газар хадгална.
• Regularly check the antenna wire for any cuts, kinks, or damage. A damaged antenna can significantly reduce range.
• Ensure all connections to the receiver are secure and free from corrosion.

Алдааг олж засварлах

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the official Flysky website or contact your authorized Flysky dealer. Keep your purchase receipt as proof of purchase.