1. Аюулгүй байдлын мэдээлэл

Read and understand all instructions before operating the TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch. Failure to follow these instructions may result in product damage, property damage, or serious injury.

• Keep hands away from moving parts: Ensure hands, clothing, and other objects are clear of the rope and winch drum during operation.
• Use safety cable when underway: Always secure the anchor with the provided safety chain or cable when the boat is in motion to prevent accidental deployment or loss.
• Stow anchor in boat when trailering: For transport, ensure the anchor is fully retrieved and secured within the boat, not hanging from the winch.
• Эрчим хүчийг салгах: Disconnect power to the winch when performing maintenance or when the winch is not in use for extended periods.
• Санал 65 Анхааруулга: Энэ бүтээгдэхүүн нь Калифорнийн 65-р саналд заасан материал агуулсан байж болзошгүй.

2. Бүтээгдэхүүн дууссанview

The TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch is designed for automatic anchor deployment and retrieval, supporting anchors up to 30 lb. It features a durable all-steel gear motor for reliable performance.

Оруулсан бүрэлдэхүүн хэсгүүд:

• TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch
• 100-feet of 3/16-inch pre-wound braided anchor rope
• Automatic resetting circuit breaker
• Sealed membrane switch (control panel)
• Утасгүй алсын удирдлага
• 14-gauge marine-grade battery wire (17-feet in length)
• Anchor safety chain
• Угсрах тоног төхөөрөмж

Note: Anchor is not included and must be purchased separately.

3. Техникийн үзүүлэлтүүд

4. Тохиргоо ба суурилуулалт

Proper installation is crucial for the safe and effective operation of your anchor winch. Always ensure your boat's mounting surface is strong enough to support the winch and anchor forces.

Суурилуулалтын үе шатууд (ерөнхий заавар):

1. Суулгах байршлыг сонгоно уу: Select a flat, reinforced area on your boat's bow or stern that allows for clear anchor deployment and retrieval, and easy access to the control panel.
2. Secure the Winch: Use the provided assembly hardware to securely mount the winch unit to the chosen location. Ensure all bolts are tightened appropriately.
3. Эрчим хүчийг холбох: Route the 14-gauge marine-grade battery wire to your boat's 12V battery. Connect the positive (+) wire to the positive terminal and the negative (-) wire to the negative terminal. Install the automatic resetting circuit breaker as per the included instructions to protect the system.
4. Attach Anchor: Securely attach your anchor (not included) to the carabiner at the end of the pre-wound anchor rope.
5. Install Anchor Safety Chain: Attach the anchor safety chain to the anchor and a secure point on your boat to prevent accidental deployment or loss during transport or high-speed operation.

5. Ашиглалтын заавар

The TRAC Angler 30 AutoDeploy-G3 offers convenient anchor control via its sealed membrane switch and wireless remote.

Хяналтын самбарыг ашиглах:

• Deploy Anchor: -г удаан дар ДООШ button (or the anchor symbol button for auto-deploy) to lower the anchor. The winch will automatically stop when the anchor reaches the bottom and the rope tension decreases.
• Retrieve Anchor: -г удаан дар UP button to raise the anchor. Release the button once the anchor is fully retrieved and secured.

Утасгүй алсын удирдлага ашиглах нь:

The wireless remote provides convenient operation from anywhere on your boat.

• Асаах/унтраах: Use the ON/OFF buttons to activate or deactivate the remote.
• Deploy Anchor: дээр дарна уу ДООШ button to lower the anchor.
• Retrieve Anchor: дээр дарна уу UP button to raise the anchor.
• Түгжих функц: Use the LOCK button to prevent accidental operation.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and reliable performance of your anchor winch.

• Олсыг шалгах: Periodically check the anchor rope for fraying, cuts, or excessive wear. Replace if necessary.
• Цахилгааны холболтыг шалгах: Ensure all battery and winch connections are clean, tight, and free of corrosion.
• Clean Winch Unit: Wipe down the winch exterior with a damp cloth to remove salt, dirt, and debris. Avoid using harsh chemicals.
• Тосолгоо: Refer to the detailed product manual for any specific lubrication requirements for internal components.

7. Алдаа засах

If you encounter issues with your TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch, consult the following common troubleshooting steps:

• Winch Not Operating:
  • Батерейны холболтын нягтрал болон зэврэлтийг шалгана уу.
  • Verify the circuit breaker has not tripped. Reset if necessary.
  • Ensure the wireless remote has fresh batteries and is properly paired (refer to remote instructions).
• Anchor Not Deploying/Retrieving Smoothly:
  • Inspect the anchor rope for tangles or obstructions.
  • Ensure the anchor roller is clear of debris.
  • Confirm the anchor weight does not exceed the 30 lb. maximum capacity.
• Wireless Remote Issues:
  • Алсын зайг солих.
  • Ойролцоох хүчтэй хөндлөнгийн эх үүсвэр байхгүй эсэхийг шалгаарай.
  • If the remote is damaged or unresponsive, consider using the sealed membrane switch on the winch unit.

For persistent issues, contact TRAC Outdoor Products customer support.

8. Баталгаат хугацаа ба дэмжлэг

The TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch (Model 69004) includes a хязгаарлагдмал нэг жилийн баталгаат хугацаа худалдан авсан өдрөөс. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна.

For warranty claims, technical assistance, or replacement parts, please contact TRAC Outdoor Products customer support directly. Keep your proof of purchase for warranty validation.

For the most up-to-date contact information and detailed warranty terms, please visit the official Trac webсайт эсвэл таны бүтээгдэхүүнд багтсан баримт бичигт хандана уу.