1. Бүтээгдэхүүн дууссанview
The GM Lighting LumenTask X8-120-WH is an 8-inch, 120V Xenon undercabinet fixture designed to provide high-intensity, low-maintenance lighting. It features a sleek white finish and a tempered frosted prismatic glass lens for optimal light distribution. The fixture includes an anodized aluminum reflector for maximum illumination and a Hi-Low-Off switch for adjustable lighting levels. Its unique 'Open Wide' hinged system allows for hands-free re-lamping and maintenance.
Гол онцлогууд:
- 8 inches long x 4.75 inches wide x 1.375 inches high.
- Includes one (1) 35W G9 base 120V Xenon lamp.
- White finish with tempered frosted, prismatic glass lens.
- Hi-Low-Off switch for full or 50% lighting level.
- UL rated for dry, indoor locations.
- Anodized aluminum reflector for maximum light distribution.
- 'Open Wide' hinged system for easy access and maintenance.
2. Аюулгүй байдлын мэдээлэл
Энэ бэхэлгээг суурилуулах, ажиллуулахын өмнө бүх зааврыг уншиж, ойлгоорой. Эдгээр зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал болон бусад аюулд хүргэж болзошгүй.
- АНХААРУУЛГА: Цахилгаанд цохиулах эрсдэл. Суурилуулалт, засвар үйлчилгээ хийхээс өмнө гал хамгаалагч эсвэл таслагчийн хүчийг салга.
- Энэ бэхэлгээ нь зориулагдсан зөвхөн дотор ашиглах in dry locations. Do not expose to water or moisture.
- ЧУХАЛ: This fixture requires hardwiring directly to available wiring. An optional CP-6 (72-inch cord and plug) is available for separate purchase if hardwiring is not feasible.
- Агааржуулалт: The fixture must be installed a minimum of 2 inches from the back of the cabinet to allow for proper ventilation and prevent overheating.
- Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Хэрэв утас гэмтсэн эсвэл гэр нь эвдэрсэн бол бэхэлгээг ажиллуулж болохгүй.
3. Багцын агуулга
Суулгахаасаа өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.
- 1 x LumenTask X8-120-WH Undercabinet Fixture
- 1 x 35W G9 Base 120V Xenon Lamp
- Зааварчилгааны хуудас
4. Тохиргоо ба суурилуулалт
Before installation, ensure power is disconnected at the circuit breaker. This fixture is designed for hardwired installation.
4.1 Fixture Dimensions and Features
Зураг 1: This diagram illustrates the overall dimensions of the 8-inch LumenTask fixture, including its length (8 inches), width (4-3/4 inches), and height (1-3/8 inches). It also highlights key features such as the Hi-Low-Off switch, the frosted prismatic glass lens, and the Xenon lamp with an anodized aluminum reflector. A table provides dimensions for other LumenTask models (X8, X16, X24, X32, X40).
4.2 Detailed Component View
Зураг 2: Үүнийг дэлгэрэнгүй view shows the internal and external components of the LumenTask fixture. It points out the ceramic lamp socket, 'Open Wide' wiring compartment, anodized aluminum mirrored reflector, tempered frosted prismatic glass lens, Hi-Low-Off switch, die-cast end caps, multiple vents for cooling, and mounting holes with pre-set screws. It also describes the one-piece, low-profile CRS housing with die-cast ends for stability.
4.3 Accessing the Interior for Wiring
The LumenTask fixture features an 'Open Wide' design for easy access to the wiring compartment without dismounting the fixture. This allows for hands-free wiring and maintenance.
- To open, simply depress the wire compartment holding tab.
- The wiring compartment cover will swing down and out, staying in position.
- Make necessary electrical connections.
- Once wiring is complete, snap the cover back into its closed position.
- Slide the lens back into place.
Зураг 3: This series of images demonstrates the process of accessing the interior of the LumenTask fixture. It shows how to depress the tab to open the wiring compartment, revealing the internal wiring, and how to slide the lens back into position after maintenance or wiring.
4.4 Суурилуулалт
- Identify the mounting holes with pre-set screws on the fixture.
- Position the fixture under the cabinet, ensuring the 2-inch ventilation clearance from the back of the cabinet.
- Secure the fixture using appropriate screws (not included) through the mounting holes.
- Wire mold knock-outs on the end caps are provided for through-wiring multiple units using Lumen Task EZ Connectors (sold separately).
5. Ашиглалтын заавар
Once installed and powered, the LumenTask fixture is ready for operation.
- Асаах/унтраах: Use the integrated Hi-Low-Off rocker switch located on the fixture to turn the light on or off.
- Гэрэлтүүлгийн тохируулга: The Hi-Low-Off switch also allows you to select between full brightness ('Hi') and 50% brightness ('Low').
- Бүдэгрүүлж байна: The fixture can be dimmed remotely by a standard incandescent dimmer (sold separately) if connected to a dimmable circuit.
6. Засвар үйлчилгээ
Regular maintenance ensures optimal performance and longevity of your LumenTask fixture.
6.1 лamp Солих
The Xenon lamp has a rated average life of 5,000 hours. When replacement is needed:
- Цахилгааныг салгах: Always turn off power to the fixture at the circuit breaker before replacing the lamp.
- Access Interior: Use the 'Open Wide' hinged system to access the lamp compartment (refer to Section 4.3).
- Хуучин Лamp: Carefully remove the old 35W G9 base Xenon lamp from its ceramic socket. Allow the lamp to cool if it has been recently in use.
- Шинэ L суулгахamp: Insert a new 35W G9 base 120V Xenon lamp into the socket. Avoid touching the new lamp with bare hands; use a cloth or glove to prevent oil residue.
- Хаалтын тоглолтын хуваарь: Close the wiring compartment cover and slide the lens back into place.
- Эрчим хүчийг сэргээх: Хэлхээ таслагчийн хүчийг сэргээнэ.
6.2 Цэвэрлэгээ
- Ensure the fixture is off and cool before cleaning.
- Гаднах гадаргууг зөөлөн, хуурай даавуугаар арчина.
- Зөрүүд тэмдгүүдийн хувьд бага зэрэг damp зөөлөн савантай даавуугаар арчиж, дараа нь хуурай арчина.
- Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
7. Алдаа засах
If you encounter issues with your LumenTask fixture, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Гэрэл асдаггүй. | Бэхэлгээнд хүч байхгүй. | Check circuit breaker and wall switch. Ensure all wiring connections are secure. |
| Гэрэл анивчих эсвэл бүдэг байна. | Сул lamp or faulty lamp. | l-г баталгаажуулна ууamp is securely seated. Replace the lamp if it is old or appears faulty. |
| Суурь хэт халж байна. | Агааржуулалт хангалтгүй байна. | Verify that there is at least 2 inches of clearance from the back of the cabinet for proper airflow. |
| Бүдгэрүүлэх функц ажиллахгүй байна. | Incompatible dimmer or incorrect wiring. | Ensure an incandescent dimmer is used. Check dimmer wiring. |
If troubleshooting steps do not resolve the issue, contact GM Lighting customer support.
8. Техникийн үзүүлэлтүүд
| Тодорхойлолт | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | X8-120-WH |
| Хэмжээ (L x W x H) | 8 x 4.75 x 1.38 инч |
| Зүйлийн жин | 1.15 фунт |
| Ботьtage | 120 вольт |
| Ватtage | 35 ватт |
| Гэрлийн эх үүсвэрийн төрөл | Xenon (G9 base) |
| Гэрлийн эх үүсвэрийн тоо | 1 |
| Өнгөний температур | 2900 Келвин |
| Төгсгөлийн төрөл | Цагаан |
| Сүүдрийн материал | Хөнгөн цагаан, шил |
| Шилжүүлэгчийн төрөл | Hi-Low-Off Rocker Switch |
| Хяналтын арга | Remote (via dimmer) |
| Дотор/гадаа ашиглах | Зөвхөн дотор ашиглах |
| Суурилуулах төрөл | Доод кабинет |
| Онцлог шинж чанар | Requires 2-inch minimum clearance for ventilation. Hardwired installation. |
9. Баталгаат хугацаа ба дэмжлэг
GM Lighting is committed to quality and customer satisfaction. While specific warranty details are not provided in this document, GM Lighting products are designed with durability in mind.
For technical assistance, layout guidance, or installation support, please contact GM Lighting's technical staff. Refer to the product packaging or GM Lighting's official webодоогийн холбоо барих мэдээллийг авах сайт.
