1. Танилцуулга
Thank you for choosing the SVS PB-1000 Powered Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new subwoofer. The PB-1000 is designed to deliver deep, powerful, and accurate bass for both home theater and music listening experiences. Its 10-inch high-excursion driver and 300-watt RMS (700+ watts peak) Sledge STA-300D DSP amplifier ensure precise control and impressive low-frequency extension.

Зураг 1.1: Урд view of the SVS PB-1000 Subwoofer without the grille, highlighting the driver and port.
2. Аюулгүй байдлын мэдээлэл
Please read all safety instructions before operating your SVS PB-1000 subwoofer. Retain this manual for future reference.
- Эрчим хүчний эх үүсвэр: Connect the subwoofer only to a power outlet of the type described in this manual or marked on the unit.
- Агааржуулалт: Сабвуферын эргэн тойронд хангалттай агааржуулалт байгаа эсэхийг шалгаарай. Агааржуулалтын нүхийг бүү бөглөөрэй.
- Ус ба чийг: Do not expose the subwoofer to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the apparatus.
- Дулаан: Do not place the subwoofer near heat sources such as radiators, heat registers, stoves, or other apparatus (including ampөргөгч) дулаан үүсгэдэг.
- Цэвэрлэгээ: Зөвхөн хуурай даавуугаар цэвэрлэ.
- Үйлчилгээ: Энэ бүтээгдэхүүнд өөрөө үйлчлэх гэж бүү оролдоорой. Бүх засвар үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад хандаарай.
- Байршил: Сабвуферыг өнхрөхөөс сэргийлж тогтвортой, тэгш гадаргуу дээр байрлуул.
3. Багцын агуулга
Хайрцгийг онгойлгосны дараа бүх зүйлс байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгана уу:
- SVS PB-1000 Powered Subwoofer
- Салдаг цахилгааны утас
- Хурдан эхлүүлэх гарын авлага (дэлгэрэнгүй зааврыг энэ гарын авлагаас үзнэ үү)
- Grille (pre-installed or separate)

Зураг 3.1: Урд view of the SVS PB-1000 Subwoofer with the grille attached.
4. Тохиргоо
4.1 Сабвуфер байрлуулах
Subwoofer placement significantly impacts performance. Experiment with different locations to find the best sound for your room. Common placement options include:
- Front of the Room: Near the front speakers, often in a corner or along the front wall. Corner placement can increase output but may also emphasize certain frequencies.
- Mid-Wall: Along a side wall, which can provide a more balanced bass response.
- "Subwoofer Crawl": Place the subwoofer in your primary listening position, then crawl around the room to find where the bass sounds best. This is often the ideal spot for the subwoofer.

Зураг 4.1: Жишээ ньample of SVS PB-1000 placement in a living space.
4.2 холболт
The PB-1000 offers both Line Level (RCA) and Speaker Level inputs. Choose the connection method that best suits your audio system.

Figure 4.2: Rear panel connections and controls of the SVS PB-1000.
4.2.1 Line Level Connection (Recommended)
This is the preferred method for most home theater receivers and pre-amplifiers with a dedicated Subwoofer/LFE output.
- Connect one end of an RCA cable to the LFE/Subwoofer output on your receiver/processor.
- Connect the other end of the RCA cable to the "LINE LEVEL INPUT" (LFE) on the PB-1000's rear panel.
- If your receiver has separate Left and Right pre-outs for the subwoofer, connect both to the "LINE LEVEL INPUT" (Left and Right) on the PB-1000.
4.2.2 Speaker Level Connection
Use this method if your receiver/amplifier does not have a dedicated subwoofer output.
- Connect speaker wires from the main left and right speaker outputs of your receiver/amplifier to the "HIGH LEVEL SPEAKER INPUT" terminals on the PB-1000. Ensure correct polarity (+ to + and - to -).
- Then, connect your main left and right speakers to the "HIGH LEVEL SPEAKER OUTPUT" terminals on the PB-1000.
4.3 асаалттай байна
- Connect the detachable power cord to the AC inlet on the rear panel of the PB-1000.
- Цахилгааны утасны нөгөө үзүүрийг тохирох залгуурт залгаарай.
- Flip the main power switch on the rear panel to the "ON" position. The LED indicator on the front of the subwoofer will illuminate.
5. Үйлдлийн удирдлага
The SVS PB-1000 features several controls on its rear panel to fine-tune its performance to your system and room acoustics.
- Эзлэхүүн (ашиг): Сабвуферын нийт гаралтын түвшинг тохируулна. Бага тохиргооноос эхэлж, басс нь үндсэн чанга яригчтай төгс зохицох хүртэл аажмаар нэмэгдүүлнэ.
- Бага дамжуулалтын шүүлтүүр (Кроссовер): This control sets the upper frequency limit for the subwoofer. Frequencies above this setting will be rolled off.
- If using a receiver with LFE output and bass management, set this to LFE (120Hz) or bypass if your receiver handles the crossover.
- If using speaker level inputs or a stereo receiver without bass management, adjust this to blend with your main speakers (typically between 60Hz and 100Hz).
- Үе шат: Adjusts the phase of the subwoofer output relative to your main speakers. This helps ensure that bass waves from the subwoofer and main speakers arrive at your listening position in sync.
- Start at 0 degrees. If the bass sounds weak or hollow, try 180 degrees. The setting that produces the loudest and most impactful bass is usually correct.
- Auto/On/Standby Switch:
- Автомат: The subwoofer will automatically turn on when an audio signal is detected and enter standby mode after a period of inactivity.
- Асаалттай: The subwoofer remains powered on continuously.
- Зогсолт: The subwoofer remains in a low-power standby state.
6. Засвар үйлчилгээ
The SVS PB-1000 is designed for years of reliable performance with minimal maintenance.
- Цэвэрлэгээ: Use a soft, dry cloth to clean the cabinet. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Тоос: Regularly dust the driver and port areas to prevent accumulation.
- Агааржуулалт: Ар талыг нь баталгаажуул amplifier panel has adequate airflow and is not obstructed.
- Хадгалах: Хэрэв сабвуферийг удаан хугацаагаар хадгалах бол түүнийг цахилгаанаас нь салгаад сэрүүн, хуурай газар хадгална уу.
7. Алдаа засах
If you experience issues with your PB-1000, consult the following table before contacting customer support.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сабвуферээс дуу гарахгүй байна |
|
|
| Weak or boomy bass |
|
|
| Хувцаслах эсвэл дуугарах чимээ |
|
|
8. Техникийн үзүүлэлтүүд
| Загварын нэр | PB-1000 |
| Чанга яригчийн төрөл | Subwoofer хөдөлгүүртэй |
| Жолоочийн хэмжээ | 10 Inches (High-excursion) |
| AmpАмьдралын төрөл | Sledge STA-300D DSP Ampнастан |
| AmpАмьдралын хүч | 300 Watts RMS (700+ Watts Peak) |
| Давтамжийн хариу үйлдэл | Down to 19Hz (typical) |
| Хэмжээ (H x W x D) | 18.9" x 15" x 19.4" (480мм x 381мм x 493мм) |
| Жин | 46 фунт (20.9 кг) |
| Засгийн газрын материал | Wood (Premium Black Ash finish) |
| Холболт | RCA (Line Level), Speaker Level (High Level) |
| Хяналтын арга | Manual knobs (Volume, Low Pass Filter, Phase) |
| Эрчим хүчний эх үүсвэр | Corded Electric (110 Volts Input) |
| UPC | 850071005172, 851888000305 |

Figure 8.1: SVS PB-1000 Subwoofer dimensions.
9. Баталгаат хугацааны мэдээлэл
SVS products are designed for reliability and performance. The SVS PB-1000 Subwoofer comes with a comprehensive warranty. Please refer to the official SVS website or your purchase documentation for the most current and detailed warranty terms and conditions. Generally, the warranty covers defects in materials and workmanship under normal use.
Баталгаат төрөл: Бүрэн
For warranty claims or inquiries, please retain your proof of purchase and contact SVS customer support.
10. Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact SVS customer support:
- Webсайт: Visit the official SVS webТүгээмэл асуултууд, дэмжлэгийн нийтлэлүүд болон холбоо барих мэдээллийн сайт.
- Имэйл/утас: Specific contact details can be found on the SVS webсайтын дэмжлэгийн хэсэг.
When contacting support, please have your product model (PB-1000) and serial number ready.





