Bixolon SRP-350IIICOSG Thermal Receipt Printer User Manual

1. Танилцуулга

This manual provides essential instructions for the safe and efficient use of your Bixolon SRP-350IIICOSG Thermal Receipt Printer. Please read this manual thoroughly before operating the printer and retain it for future reference. This printer is designed for point-of-sale (POS) receipt printing applications.

2. Аюулгүй байдлын мэдээлэл

• Эрчим хүчний хангамж: Use only the power supply provided with the printer. Using an incorrect power supply may damage the printer and void the warranty.
• Байршил: Place the printer on a stable, level surface. Avoid locations with excessive dust, humidity, or direct sunlight.
• Агааржуулалт: Ensure adequate ventilation around the printer to prevent overheating. Do not block ventilation openings.
• Шингэнтэй холбоо барих: Keep the printer away from liquids. In case of accidental liquid spillage, immediately disconnect the power and contact qualified service personnel.
• Хөдөлгөөнт хэсгүүд: Keep hands and foreign objects away from the paper cutter and other moving parts during operation.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• Bixolon SRP-350IIICOSG Thermal Receipt Printer
• Эрчим хүчний хангамж
• Цахилгааны утас
• Starter Paper Roll
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

4. Тохиргоо

4.1 Савлах ба байрлуулах

Carefully remove the printer from its packaging. Place the printer on a flat, stable surface near your computer or POS system.

4.2 Цахилгаан хангамжийг холбох

1. Цахилгааны утсыг цахилгаан тэжээлд холбоно уу.
2. Plug the power supply connector into the power port on the back of the printer.
3. Цахилгааны утсыг газардуулсан цахилгааны залгуурт холбоно уу.

4.3 Өгөгдлийн кабелийг холбох

The SRP-350IIICOSG printer supports Serial and USB interfaces.

Зураг 4.3.1: Ар талд view of the Bixolon SRP-350IIICOSG printer, illustrating the various connection ports including power, USB, serial, and Ethernet.

• USB холболт: Connect one end of a USB cable (Type B) to the USB port on the printer and the other end to an available USB port on your computer or POS system.
• Цуваа холболт: Connect one end of a serial cable (DB9) to the serial port on the printer and the other end to an available serial port on your computer or POS system.

4.4 Loading the Paper Roll

1. Open the printer cover by pushing the cover open lever.
2. Insert the new paper roll into the paper compartment with the paper feeding from the bottom.
3. Зүсэгчийн хажуугаар бага хэмжээний цаас гаргаж ав.
4. Принтерийн тагийг байрандаа товших чимээ гартал сайтар хаа.

Зураг 4.4.1: Урд тал view of the Bixolon SRP-350IIICOSG printer, showing a paper roll correctly loaded and ready for printing.

4.5 Драйвер суурилуулах

Before using the printer, you must install the appropriate drivers on your computer or POS system. Drivers are typically available on the Bixolon official website. Follow the instructions provided with the driver package for installation.

5. Принтерийг ажиллуулах

5.1 Асаах/унтраах

To power on the printer, press the power switch located on the side or back of the printer to the 'ON' position. To power off, press the switch to the 'OFF' position.

5.2 Статусын үзүүлэлтүүд

The printer features LED indicators to show its current status:

• Эрчим хүчний LED: Принтер асаалттай үед гэрэлтдэг.
• Алдааны LED: Flashes or illuminates to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the troubleshooting section for details.
• Paper LED: Цаасан ороомог бага эсвэл байхгүй үед гэрэлтдэг.

5.3 Туршилтын хуудас хэвлэх

To print a self-test page:

1. Ensure the printer is powered off and paper is loaded.
2. Hold down the FEED button.
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the printer starts printing.

The printer will print a test page showing its current settings and status.

6. Засвар үйлчилгээ

6.1 Хэвлэх толгойг цэвэрлэх

Regular cleaning of the print head ensures optimal print quality and extends printer life. Clean the print head using an alcohol swab or a specialized print head cleaning pen.

1. Принтерийг унтраагаад цахилгааны утсыг салга.
2. Принтерийн тагийг нээ.
3. Gently wipe the thermal elements of the print head with the cleaning tool.
4. Тагийг хааж, цахилгааныг дахин холбохоос өмнө хэвлэх толгойг бүрэн хаттал хүлээнэ үү.

6.2 Цаасан ороомгийг солих

When the paper roll is depleted, the paper out LED will illuminate. Follow the steps in Section 4.4 to replace the paper roll.

6.3 Cleaning the Auto Cutter

If the auto cutter experiences frequent jams or malfunctions, it may require cleaning. Use a soft brush or compressed air to remove paper dust and debris from the cutter mechanism.

7. Алдаа засах

Энэ хэсэгт таны хэвлэгчтэй холбоотой нийтлэг асуудлуудыг авч үзэх болно.

8. Техникийн үзүүлэлтүүд

Key technical specifications for the Bixolon SRP-350IIICOSG Thermal Receipt Printer:

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Bixolon webсайт. Та тэндээс жолооч, түгээмэл асуултууд болон харилцагчийн үйлчилгээний холбоо барих мэдээллийг олох боломжтой.

Биксолон албан тушаалтан Webсайт: www.bixolon.com