1. Аюулгүй ажиллагааны ерөнхий заавар
Энэхүү цахилгаан хэрэгсэлд өгөгдсөн бүх аюулгүй байдлын анхааруулга, заавар, дүрслэл, техникийн үзүүлэлтүүдийг үргэлж уншиж, ойлгоорой. Доор жагсаасан бүх зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал болон/эсвэл хүнд гэмтэл учруулж болзошгүй.
- Ажлын талбайн аюулгүй байдал: Ажлын байраа цэвэр, гэрэлтүүлэг сайтай байлга. Эмх замбараагүй эсвэл харанхуй газар осол аваар гарахыг өдөөдөг. Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
- Цахилгааны аюулгүй байдал: Цахилгаан хэрэгслийн залгуур нь залгууртай тохирч байх ёстой. Залгуурыг хэзээ ч бүү өөрчил. Утасыг бүү ашигла. Цахилгаан хэрэгслийг зөөх, татах, залгуураас салгахад утсыг хэзээ ч бүү ашигла. Утсыг халуун, тос, хурц ирмэг, хөдөлгөөнт хэсгүүдээс хол байлга.
- Хувийн аюулгүй байдал: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Хэрэгслийн хэрэглээ ба арчилгаа: Цахилгаан хэрэгслийг хүчээр бүү хий. Хэрэглээнд тохирох цахилгаан хэрэгслийг ашигла. Аливаа тохируулга хийх, дагалдах хэрэгслийг солих, цахилгаан хэрэгслийг хадгалахын өмнө залгуурыг тэжээлийн эх үүсвэрээс салга.
- Тодорхой хазайлтын хөрөөний аюулгүй байдал: Ажлын хэсэг найдвартай байгаа эсэхийг шалгаарай clamped before cutting. Keep hands clear of the cutting area and the blade. Allow the blade to reach full speed before beginning a cut.
2. Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд
The Einhell TC-MS 2513 L Miter Saw is designed for precise and efficient cutting tasks. Familiarize yourself with its key components for safe and effective operation.
Зураг 2.1: Ерөнхийдөө view of the Einhell TC-MS 2513 L Miter Saw, showcasing its compact and robust design with the dust collection bag attached.
Зураг 2.2: A user demonstrating the proper stance and operation of the miter saw for cutting a wooden workpiece.
Зураг 2.3: Ойролцоогоор view of the integrated laser guide, projecting a precise line onto the workpiece for accurate cutting alignment.
Зураг 2.4: The adjustable X-Tend supports, designed to provide stable support for longer workpieces during cutting operations.
Зураг 2.5: Illustration of the saw head tilting mechanism, allowing for easy adjustment to achieve precise miter cuts.
Зураг 2.6: A close-up of the high-quality carbide-tipped saw blade, designed for clean and powerful cuts.
Гол бүрэлдэхүүн хэсгүүд:
- Swivel Plate: High-quality base with exact angle adjustment for angular cuts.
- Хөрөөний толгой: Can be tilted to the left for miter cuts.
- Лазер гарын авлага: Mains-powered laser marks the cutting line for quick and precise positioning.
- Clamping Device: Robust mechanism to securely fix workpieces.
- X-Tend Supports: Adjustable supports for processing long workpieces.
- Integrated Stop: Ensures precise and repeatable cuts.
- Хөрөөний ир: Superior quality carbide-tipped blade for clean and powerful cutting.
- Тоос цуглуулах уут: Effective for maintaining a clean workplace by collecting sawdust.
- Зөөх бариул: For simple and safe transportation of the tool.
3. Тохиргоо
Before operating the miter saw, ensure it is properly set up and secured.
- Савлах, шалгах: Carefully remove the saw from its packaging. Inspect all components for any damage that may have occurred during transit. Ensure all listed parts are present.
- Хөрөө суурилуулах: For stable operation, it is recommended to mount the miter saw to a workbench or a stable stand using appropriate fasteners.
- Attaching the Dust Bag: Connect the provided dust collection bag to the dust extraction port on the saw. Ensure it is securely fastened to effectively collect sawdust during operation.
- Adjusting X-Tend Supports: Extend the X-Tend supports as needed to provide adequate support for the length of your workpiece. These supports can be adjusted with one hand.
- Эрчим хүчний холболт: Connect the saw's power cord to a suitable 230V power outlet. Ensure the power switch is in the OFF position before plugging in.
4. Ашиглалтын заавар
Follow these steps for safe and effective operation of your Einhell TC-MS 2513 L Miter Saw.
- Ажлын хэсгийн байршил: Place the workpiece firmly against the fence and on the saw table.
- Securing the Workpiece: Use the robust clamping device to securely fix the workpiece in place. This is crucial for preventing movement during cutting and ensuring safety.
- Setting the Cutting Angle (Miter Cut):
- Loosen the locking handle for the swivel plate.
- Rotate the swivel plate to the desired angle, indicated on the scale. The high-quality swivel plate allows for exact angle adjustment.
- Lock the swivel plate in position with one hand.
- Setting the Bevel Angle (Tilt Cut):
- To make miter cuts, the saw head can be tilted to the left.
- Adjust the tilt angle as required and secure it.
- Using the Laser Guide: Activate the mains-powered laser. The laser line will project onto your workpiece, indicating the precise cutting path. Use this guide for quick and accurate positioning.
- Тайралт хийх:
- Ensure the area around the blade is clear of obstructions and your hands.
- Press the power switch to start the saw. Allow the blade to reach its full operating speed (4000 rpm) before beginning the cut.
- Slowly and steadily lower the saw blade through the workpiece. Do not force the saw.
- Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Using the Integrated Stop: For repetitive cuts of the same length, utilize the integrated stop feature to ensure consistent and precise results.
Зураг 4.1: Diagram illustrating various cutting angles and their corresponding maximum cutting capacities (e.g., 90°x90°: 130x75 mm, 45°x45°: 95x35 mm).
5. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны хөрөөний урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: After each use, disconnect the saw from the power supply. Clean the saw thoroughly, especially around the blade guard, table, and dust collection port, to remove sawdust and debris. The sawdust collection bag should be emptied regularly.
- Хутгыг шалгах, солих: Regularly inspect the carbide-tipped saw blade for sharpness and damage. A dull or damaged blade can lead to poor cuts and increased strain on the motor. Replace the blade when necessary, following the instructions in your detailed product manual for safe blade removal and installation.
- Тосолгоо: Periodically lubricate moving parts as recommended in the full product manual to ensure smooth operation.
- Утасны үзлэг: Check the power cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately by a qualified professional.
6. Алдаа засах
Энэ хэсэгт таны хөрөөтэй холбоотой нийтлэг асуудлуудыг авч үзнэ.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөрөө эхлэхгүй байна | No power supply; Faulty switch; Motor overload protection activated | Check power connection; Contact service center; Allow motor to cool down |
| Буруу зүсэлт | Dull blade; Incorrect angle setting; Workpiece not clampаюулгүй ed | Replace blade; Re-adjust angle precisely; Secure workpiece firmly with clampтөхөөрөмж |
| Хэт их тоос/чипс | Dust bag full or improperly attached; Clogged dust port | Empty and reattach dust bag; Clear any blockages in the dust port |
| Хөрөөний ир нь ажлын хэсэгт бэхлэгддэг | Workpiece not supported; Forcing the cut; Dull blade | Use X-Tend supports; Do not force, let saw do the work; Replace blade |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.
7. Техникийн үзүүлэлтүүд
Technical data for the Einhell TC-MS 2513 L Miter Saw:
Зураг 7.1: Icon indicating a blade diameter of 250 mm and 48 teeth.
Зураг 7.2: Icon representing the integrated laser guide feature.
Зураг 7.3: Icon indicating a maximum cutting width of 130 mm.
Зураг 7.4: Icon indicating a maximum cutting height of 75 mm.
- Загвар: TC-MS 2513 L
- Загварын дугаар: 4300850
- Эрчим хүчний оролт: 1200 ватт
- Ботьtage: 230 вольт
- Ачаалалгүй хурд: 4000 эрг / мин
- Хөрөөний диаметр: 250 мм
- Шүдний тоо: 48
- Макс. Таслах өргөн: 120 mm (at 90°)
- Хамгийн их Таслах гүн: 75 mm (at 90°)
- Хэмжээ (L x W x H): 73 x 66.8 x 52.5 см
- Жин: 9.75 кг
- Утасны урт: 1.4 метр
- Бариулын материал: Полипропилен
- Онцлог шинж чанарууд: Depth adjustment, Laser, X-Tend supports
- Оруулсан бүрэлдэхүүн хэсгүүд: 1 Miter Saw, 1 Saw Blade, 1 Dust Bag
8. Баталгаат хугацаа ба дэмжлэг
Einhell is committed to the quality and longevity of its products.
- Өргөтгөсөн баталгаа: In addition to the standard warranty, Einhell offers an extended 3-year warranty on all Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell webхудалдан авснаас хойш 30 хоногийн дотор сайт.
- Хэрэглэгчийн дэмжлэг: For further assistance, technical support, or spare parts, please visit the official Einhell webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.
Зураг 8.1: Badge indicating the 3-year warranty available upon online registration.
